NJD35N04G NPN Darlington Power Transistor This high voltage power Darlington has been specifically designed for inductive applications such as Electronic Ignition, Switching Regulators and Motor Control. http://onsemi.com Features • Exceptional Safe Operating Area • High VCE; High Current Gain • These are Pb−Free Devices DARLINGTON POWER TRANSISTORS 4 AMPERES 350 VOLTS 45 WATTS Benefits • Reliable Performance at Higher Powers • Designed for Inductive Loads • Very Low Current Requirements Applications • • • • • MARKING DIAGRAM Internal Combustion Engine Ignition Control Switching Regulators Motor Controls Light Ballast Photo Flash 4 1 2 Symbol Value Unit Collector−Emitter Sustaining Voltage VCEO 350 Vdc Collector−Base Breakdown Voltage VCBO 700 Vdc Collector−Emitter Breakdown Voltage VCES 700 Vdc Emitter−Base Voltage VEBO 5.0 Vdc IC ICM 4.0 8.0 Adc Base Current IB 0.5 Adc Total Power Dissipation @ TC = 25°C Derate above 25°C PD 45 0.36 W W/°C TJ, Tstg −65 to +150 °C Collector Current Continuous Peak Operating and Storage Junction Temperature Range YWW NJD 35N04G 3 MAXIMUM RATINGS Rating DPAK CASE 369C STYLE 1 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Y = Year WW = Work Week NJD35N04 = Device Code G = Pb−Free Device ORDERING INFORMATION Package Shipping † NJD35N04G DPAK (Pb−Free) 75 Units / Rail NJD35N04T4G DPAK (Pb−Free) 2500/Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. THERMAL CHARACTERISTICS Characteristic Thermal Resistance Junction−to−Case Junction−to−Ambient © Semiconductor Components Industries, LLC, 2006 April, 2006 − Rev. 1 Symbol Value Unit RqJC RqJA 2.78 71.4 °C/W 1 Publication Order Number: NJD35N04/D NJD35N04G ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit VCEO(sus) 350 − − Vdc Collector Cutoff Current (VCE = 500 V) (IB = 0) (VCE = 500 V, TC = 125°C) ICES − − − − 50 250 mAdc Collector Cutoff Current (VCE = 350 V) (IB = 0) (VCE = 300 V, TC = 125°C) ICEO − − − − 50 250 mAdc Emitter Cutoff Current (VBE = 5.0 Vdc) IEBO − − 5.0 mAdc Collector−Emitter Saturation Voltage (IC = 2.0 A, IB = 20 mA) (IC = 2.0 A, IB = 20 mA 125°C) VCE(sat) − − 1.5 Vdc Base−Emitter Saturation Voltage (IC = 2.0 A, IB = 20 mA) (IC = 2.0 A, IB = 20 mA 125°C) VBE(sat) − − 2.0 Vdc Base−Emitter On Voltage (IC = 2.0 A, VCE = 2.0 V) (IC = 2.0 A, VCE = 2.0 V 125°C) VBE(on) − − 2.0 Vdc 2000 300 − − − − fT 90 − − MHz Cob − 60 − pF ts tf − − 18 0.8 − − mSec OFF CHARACTERISTICS Collector−Emitter Sustaining Voltage (IC = 10 mA, L = 10 mH) ON CHARACTERISTICS DC Current Gain (IC = 2.0 A, VCE = 2.0 V) (IC = 4.0 A, VCE = 2.0 Vdc) hFE − DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 2.0 A, VCE = 10 V, f = 1.0 MHz) Output Capacitance (VCB = 10 V, IE = 0, f = 0.1 MHz) SWITCHING CHARACTERISTICS VCC = 12 V, Vclamp = 250 V, L = 4 mH IC = 2 A, IB1 = 20 mA, IB2 = −20 mA C B E 2 KW Figure 1. Darlington Circuit Schematic http://onsemi.com 2 NJD35N04G TYPICAL CHARACTERISTICS 10,000 45 hFE, DC CURRENT GAIN PD, POWER DISSIPATION (W) 50 40 35 30 TC 25 20 15 10 125°C 1000 25°C 100 VCE = 2 V 5.0 10 0 10 30 50 70 90 110 130 150 0.1 170 Figure 2. Power Derating Figure 3. DC Current Gain VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) Ic/Ib = 100 3.0 2.5 2.0 1.5 1.0 0.5 25°C 125°C 0 1.0 2.4 2.0 1.6 25°C 1.2 125°C 0.8 0.4 Ic/Ib = 100 0 10 0.1 1.0 10 IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS) Figure 4. Collector−Emitter Saturation Voltage Figure 5. Base−Emitter Saturation Voltage 10 2.0 IC, COLLECTOR CURRENT (A) VBE(on), BASE−EMITTER VOLTAGE (V) 0.1 10 IC, COLLECTOR CURRENT (AMPS) 4.0 3.5 1.0 T, TEMPERATURE (°C) 1.6 25°C 1.2 0.8 125°C VCE = 2 V 0.4 10 mS DC 1.0 1 mS 300 mS 100 mS 0.1 0.01 0.1 1.0 10 10 100 1000 IC, COLLECTOR CURRENT (AMPS) VCE, COLLECTOR−EMITTER VOLTAGE (V) Figure 6. Base−Emitter Voltage Figure 7. Forward Bias Safe Operating Area (FBSOA) http://onsemi.com 3 NJD35N04G PACKAGE DIMENSIONS DPAK CASE 369C−01 ISSUE O C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE −T− E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D 2 PL G 0.13 (0.005) M T INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 4 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. NJD35N04/D