Order this document by BF392/D SEMICONDUCTOR TECHNICAL DATA NPN Silicon COLLECTOR 3 2 BASE 1 EMITTER MAXIMUM RATINGS Rating Symbol BF392 BF393 Unit Collector – Emitter Voltage VCEO 250 300 Vdc Collector – Base Voltage VCBO 250 300 Vdc Emitter – Base Voltage 2 VEBO 6.0 Vdc Collector Current — Continuous IC 500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 Watts mW/°C TJ, Tstg – 55 to +150 °C Symbol Max Unit Operating and Storage Junction Temperature Range 1 3 CASE 29–04, STYLE 1 TO–92 (TO–226AA) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient RqJA 200 °C/W Thermal Resistance, Junction to Case RqJC 83.3 °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Characteristic Min Max 250 300 — — 250 300 — — 6.0 6.0 — — — — 0.1 0.1 — — 0.1 0.1 Unit OFF CHARACTERISTICS Collector – Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB =0) Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) Emitter – Base Breakdown Voltage (IE = 100 mAdc, IC = 0) V(BR)CEO BF392 BF393 V(BR)CBO BF392 BF393 BF392 BF393 Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) (VEB = 6.0 Vdc, IC = 0) BF392 BF393 v 300 ms; Duty Cycle v 2.0%. Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996 Vdc V(BR)EBO BF392 BF393 Collector Cutoff Current (VCB = 200 Vdc, IE = 0) (VCB = 200 Vdc, IE = 0) 1. Pulse Test: Pulse Width Vdc Vdc µAdc ICBO µAdc IEBO 1 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max 25 40 — — — 2.0 — 2.0 50 — — 2.0 Unit ON CHARACTERISTICS DC Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) hFE All Types All Types Collector – Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) VCE(sat) Base – Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) VBE(sat) — Vdc Vdc SMALL– SIGNAL CHARACTERISTICS Current Gain — Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 20 MHz) Common Emitter Feedback Capacitance (VCB = 60 Vdc, IE = 0, f = 1.0 MHz) 2 fT MHz Cre pF Motorola Small–Signal Transistors, FETs and Diodes Device Data 200 hFE, DC CURRENT GAIN VCE = 10 Vdc TJ = +125°C 100 25°C 50 –55°C 30 20 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) 20 30 50 100 70 100 C, CAPACITANCE (pF) 50 Ceb 20 10 5.0 Ccb 2.0 1.0 0.2 0.5 1.0 2.0 5.0 10 20 50 VR, REVERSE VOLTAGE (VOLTS) 100 200 f T, CURRENT–GAIN — BANDWIDTH PRODUCT (MHz) Figure 1. DC Current Gain 100 70 50 30 20 10 1.0 Figure 2. Capacitances 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 500 IC, COLLECTOR CURRENT (mA) TJ = 25°C 1.2 V, VOLTAGE (VOLTS) 2.0 Figure 3. Current–Gain — Bandwidth Product 1.4 1.0 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 10 V 0.4 0.2 0 1.0 TJ = 25°C VCE = 20 V f = 20 MHz VCE(sat) @ IC/IB = 10 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 4. “On” Voltages Motorola Small–Signal Transistors, FETs and Diodes Device Data 200 100 10 µs 100 µs TA = 25°C 1.0 ms TC = 25°C 50 100 ms 20 CURRENT LIMIT THERMAL LIMIT (PULSE CURVES @ TC = 25°C) SECOND BREAKDOWN LIMIT 10 5.0 2.0 1.0 CURVES APPLY BELOW RATED VCEO 0.5 0.5 1.0 2.0 5.0 10 20 MPSA43 MPSA42 50 100 200 500 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 5. Maximum Forward Bias Safe Operating Area 3 PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K D J X X G H V C 1 SECTION X–X N N CASE 029–04 (TO–226AA) ISSUE AD DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 4 ◊ Motorola Small–Signal Transistors, FETs and Diodes DeviceBF392/D Data