Order this document by MPSW10/D SEMICONDUCTOR TECHNICAL DATA NPN Silicon COLLECTOR 3 2 BASE 1 EMITTER 1 MAXIMUM RATINGS Rating Symbol Value Unit Collector – Emitter Voltage VCEO 300 Vdc Collector – Base Voltage VCBO 300 Vdc Emitter – Base Voltage VEBO 6.0 Vdc Collector Current — Continuous IC 500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 1.0 8.0 Watt mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 2.5 20 Watts mW/°C TJ, Tstg – 55 to +150 °C Symbol Max Unit Thermal Resistance, Junction to Ambient RqJA 125 °C/W Thermal Resistance, Junction to Case RqJC 50 °C/W Operating and Storage Junction Temperature Range 2 3 CASE 29–05, STYLE 1 TO–92 (TO–226AE) THERMAL CHARACTERISTICS Characteristic ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Max Unit Collector – Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB = 0) V(BR)CEO 300 — Vdc Collector–Base Breakdown Voltage (IC = 100 µAdc, IE = 0) V(BR)CBO 300 — Vdc Emitter–Base Breakdown Voltage (IE = 100 µAdc, IC = 0) V(BR)EBO 6.0 — Vdc Collector Cutoff Current (VCB = 200 Vdc, IE = 0) ICBO — 0.2 µAdc Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) IEBO — 0.1 µAdc Characteristic OFF CHARACTERISTICS 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996 1 MPSW10 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max 25 40 40 — — — Unit ON CHARACTERISTICS(1) DC Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 30 mAdc, VCE = 10 Vdc) hFE — Collector–Emitter Saturation Voltage (IC = 30 mAdc, IB = 3.0 mAdc) VCE(sat) — 0.75 Vdc Base–Emitter On Voltage (IC = 30 mAdc, VCE = 10 Vdc) VBE(on) — 0.85 Vdc fT 45 — MHz Ccb — 3.0 pF SMALL–SIGNAL CHARACTERISTICS Current–Gain — Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 20 MHz) Collector–Base Capacitance (VCB = 20 Vdc, IE = 0, f = 1.0 MHz) v 300 ms, Duty Cycle v 2.0%. VCE , COLLECTOR–EMITTER VOLTAGE (VOLTS) 1. Pulse Test: Pulse Width 200 hFE, DC CURRENT GAIN VCE = 10 V TJ = 125°C 100 25°C 70 –55°C 50 30 20 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 0.6 0.5 0.4 IC = 30 mA 0.3 0.1 0 0.1 V, VOLTAGE (VOLTS) RθV, TEMPERATURE COEFFICIENTS (mV/°C) TJ = 25°C 1.0 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 10 V 0.4 5.0 0.2 0 1.0 VCE(sat) @ IC/IB = 10 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) Figure 3. “On” Voltages 2 IC = 10 mA 0.2 0.5 1.0 10 2.0 5.0 IB, BASE CURRENT (mA) 20 30 Figure 2. Collector Saturation Region 1.4 0.8 IC = 20 mA 0.2 Figure 1. DC Current Gain 1.2 TJ = 25°C 50 70 100 2.5 2.0 IC IB 1.5 + 10 25°C to 125°C 1.0 0.5 RθVC for VCE(sat) 0 –55°C to 25°C –0.5 –1.0 –1.5 –55°C to 125°C RθVB for VBE –2.0 –2.5 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 4. Temperature Coefficients Motorola Small–Signal Transistors, FETs and Diodes Device Data C, CAPACITANCE (pF) 100 70 50 TJ = 25°C Ceb 30 20 10 7.0 5.0 Ccb 3.0 2.0 1.0 0.2 0.5 1.0 2.0 5.0 10 20 50 VR, REVERSE VOLTAGE (VOLTS) 100 200 f T, CURRENT–GAIN — BANDWIDTH PRODUCT (MHz) MPSW10 Figure 5. Capacitance 100 70 50 TJ = 25°C VCE = 20 V f = 20 MHz 30 20 10 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 6. Current–Gain — Bandwidth Product IC, COLLECTOR CURRENT (mA) 1k CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 500 1.0 ms 200 1.0 s 100 µs 100 50 TA = 25°C 20 DUTY CYCLE ≤ 10% 10 10 20 50 100 200 300 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 7. Active Region — Safe Operating Area Motorola Small–Signal Transistors, FETs and Diodes Device Data 3 MPSW10 PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R SEATING PLANE P L F K X X DIM A B C D F G H J K L N P R V D G H J V 1 2 3 N C SECTION X–X N CASE 029–05 (TO–226AE) ISSUE AD INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.135 ––– 0.135 ––– MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.56 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 3.43 ––– 3.43 ––– STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 4 ◊ *MPSW10/D* MPSW10/D Motorola Small–Signal Transistors, FETs and Diodes Device Data