MOTOROLA TPV7025

Order this document
by TPV7025/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
. . . designed for output stages in Band IV & V TV transmitter amplifiers. Internal
matching of both input and output along with use of a push–pull package
configuration aids broadband amplifier designs.
Gold metallized dice with diffused emitter ballast resistors enhances
reliability, ruggedness and linearity.
• Band IV & V (470 – 860 MHz)
25 W, 470 – 860 MHz
UHF LINEAR
POWER TRANSISTOR
• 25 W — Pref @ – 45 dB IMD
• 25 V — VCC
• Push–Pull Package
• Gold Metallization for Reliability
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector–Emitter Voltage
VCEO
28
Vdc
Collector–Base Voltage
VCBO
45
Vdc
Emitter–Base Voltage
VEBO
4.0
Vdc
TJ
200
°C
Storage Temperature Range
Tstg
– 50 to + 200
°C
Operating Case Temperature
TC
70
°C
Operating Junction Temperature
CASE 398–03, STYLE 1
(BMA–4)
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction to Case (TC = 70°C)
Symbol
Max
Unit
RθJC
1.5
°C/W
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Min
Typ
Max
Unit
Collector–Emitter Breakdown Voltage
(IC = 120 mA, IB = 0)
V(BR)CEO
28
—
—
Vdc
Collector–Base Breakdown Voltage
(IC = 20 mA, IE = 0)
V(BR)CBO
45
—
—
Vdc
Emitter–Base Breakdown Voltage
(IE = 6.0 mA, IC = 0)
V(BR)EBO
4.0
—
—
Vdc
hFE
10
—
60
—
Cob
64
—
80
pF
OFF CHARACTERISTICS (1)
ON CHARACTERISTICS (1)
DC Current Gain
(IC = 1.0 A, VCE = 20 V)
DYNAMIC CHARACTERISTICS (1)
Output Capacitance
(VCB = 28 V, IE = 0, f = 1.0 MHz)
NOTE:
1. Each transistor chip measured separately.
RF DEVICE DATA
MOTOROLA
Motorola, Inc. 1994
(continued)
TPV7025
1
ELECTRICAL CHARACTERISTICS — continued
Characteristic
Symbol
Min
Typ
Max
Unit
GPE
9.0
—
10.5
dB
FUNCTIONAL TESTS (2)
Common–Emitter Amplifier Power Gain
(VCE = 25 V, Pout = 25 W, f = 860 MHz, ICQ = 3.2 A)
ψ
Load Mismatch
(VCE = 25 V, Pout = 24 W, f = 860 MHz,
Load VSWR = ∞:1, All Phase Angles)
No Degradation in Output Power
Pinover
24
—
—
W
Intermodulation Distortion, 3 Tone
(f = 860 MHz, VCE = 25 V, IE = 3.2 A, Pref = 25 W,
Vision Carrier = – 8.0 dB, Sound Carrier = –7.0 dB,
Sideband Signal = –16 dB, Specification TV05001)
IMD1
—
—
– 45
dB
Cross Modulation Distortion
(Pref = 25 W, f = 860 MHz, ∆% Sound = (–7.0 dB),
Vision 0 – Peak)
XMOD
—
—
20
%
Overdrive (f = 470 MHz, 2 tones, VCE = 25 V, IC = 3.2 A)
(No Degradation)
NOTE:
2. Both transistor chips operating in push–pull amplifier.
– 45
– 55
f = 860 MHz
VCE = 25 V
IC = 3.2 A
Tbp = 25°C
3 TONES: – 8 dB, – 7 dB, – 17 dB
– 65
TPV7025
2
5
6.25
8
10
12.5
16
20
25
28
IMD, INTERMODULATION DISTORTION (dB)
IMD, INTERMODULATION DISTORTION (dB)
TYPICAL CHARACTERISTICS
– 48
– 50
Pout = 20 W
VCE = 25 V
IC = 3.2 A
Tbp = 25°C
3 TONES: – 8 dB, – 7 dB, – 17 dB
– 52
500
600
700
800
Pout, OUTPUT POWER (WATTS)
f, FREQUENCY (MHz)
Figure 1. IMD versus Output Power
Figure 2. IMD versus Frequency
MOTOROLA RF DEVICE DATA
VBB
VCC
C2
C6
L6
R1
L1
L2
L5
C8
L3
L4
L7
C1
C3
BALUN
C1 — 15 pF
C2 — 180 pF
C3 — 10 pF
C4 — 15 pF
C5 — 15 pF
C6 — 180 pF
C7 — 4.7 pF
C8 — 100 pF
L1 — 90 / 16 mm
L2 — 90 / 16 mm
L3 — 35 / 10 mm
L4 — 25 / 7 mm
L5 — 70 / 6 mm
L6 — 70 / 26 mm
L7 — 60 / 16 mm
R1 — 3.3 Ω
C4
C5
C7
C1
BALUN
C8
L3
L4
L7
D.U.T.
L2
L5
L1
PRINTED–BALUN
R1
L6
VBB
50 Ω
25 Ω / 45 mm
C6
C2
VCC
25 Ω / 45 mm
Board Material: Teflon Glass Substrate .020 In.
Note: L1 to L7 dimension given in length/width.
Figure 3. 470 – 860 MHz Broadband Test Circuit
S11
S21
VCE
(Volts)
IC
(A)
f
(GHz)
Mag
±
φ
Mag
25
2 x 1.8
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.82
0.84
0.86
0.88
1.0
1.0
1.0
0.99
0.98
0.97
0.97
0.94
0.92
0.89
0.86
0.82
0.79
0.79
0.79
0.82
0.84
0.86
0.88
0.89
0.90
0.90
0.90
178
176
174
173
171
173
171
169
164
163
163
164
166
169
171
172
172
172
171
170
170
169
168
1.25
1.25
1.30
1.39
1.42
1.52
1.67
1.77
1.93
2.05
2.19
2.29
2.29
2.16
1.99
1.80
1.59
1.38
1.23
1.10
0.99
0.89
0.80
S12
±
φ
80
84
81
75
70
65
67
49
40
30
18
4.0
– 11
– 26
– 40
– 52
– 63
– 74
– 82
– 88
– 94
– 100
– 107
Mag
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.04
0.04
0.03
0.03
0.03
0.03
0.03
S22
±
φ
29
31
30
29
26
17
12
8.0
0
– 9.0
– 19
– 30
– 42
– 55
– 66
– 76
– 87
– 96
– 102
– 106
– 110
– 115
– 119
Mag
0.89
0.78
0.70
0.65
0.59
0.53
0.46
0.39
0.31
0.23
0.21
0.30
0.43
0.57
0.68
0.77
0.83
0.86
0.88
0.88
0.89
0.88
0.87
±
φ
156
151
148
145
142
140
139
138
142
157
– 173
– 150
– 147
– 150
– 155
– 161
– 168
– 173
– 178
178
175
172
170
Table 1. Common Emitter S–Parameters
MOTOROLA RF DEVICE DATA
TPV7025
3
PACKAGE DIMENSIONS
–A–
U
1
Q
0.025 (0.010)
2
M
T A
M
B
M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
DIM
A
B
C
D
E
G
H
J
K
N
Q
U
–B–
5
3
K
4
D
G
J
N
E
C
–T–
H
SEATING
PLANE
STYLE 1:
PIN 1.
2.
3.
4.
5.
INCHES
MIN
MAX
1.094
1.110
0.457
0.465
0.165
0.182
0.121
0.131
0.055
0.065
0.177
0.185
0.081
0.091
0.002
0.004
0.142
0.163
0.510
0.520
0.125
0.135
0.844 BSC
MILLIMETERS
MIN
MAX
27.79
28.19
11.61
11.81
4.25
4.62
3.08
3.32
1.40
1.65
4.50
4.69
2.06
2.31
0.06
0.10
3.60
4.14
12.95
13.21
3.18
3.42
21.44 BSC
COLLECTOR
COLLECTOR
BASE
BASE
EMITTER
CASE 398–03
ISSUE C
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
TPV7025
4
◊
*TPV7025/D*
TPV7025/D
MOTOROLA RF DEVICE
DATA