MOS FET Relays G3VM-41GR5 New MOS FET Relay with Low Output Capacitance and ON Resistance (C´R = 10pF· W) in a 40-V Load Voltage Model • ON resistance of 1 W (typical) suppresses output signal attenuation. • Leakage current of 1.0 nA max. when output relay is open. ■ Application Examples Note: • Semiconductor inspection tools The actual product is marked differently from the image shown here. • Measurement devices • Broadband systems • Data loggers ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 40 VAC Model Number per stick 100 --- G3VM-41GR5(TR) --- 2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-41GR5 4.4±0.25 3.9±0.2 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.4±0.1 0.6±0.3 0.1±0.1 7.0±0.4 2.54±0.25 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-41GR5 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-41GR5 6 to 6.3 1.2 0.8 2.54 52 Number per tape G3VM-41GR5 G3VM-41GR5 G3VM-41GR5 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 ms pulses, 100 pps LED forward current reduction rate D IF/°C -0.5 mA/°C Ta ³ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Output dielectric strength VOFF 40 V Continuous load current IO 300 mA ON current reduction rate D ION/°C -3.0 mA/°C Connection temperature Tj 125 °C Dielectric strength between input and output (See note 1.) VI-O 1,500 Vrms AC for 1 min Operating temperature Ta -20 to +85 °C With no icing or condensation Storage temperature Tstg -40 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 °C 10 s Output 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ³ 25°C ■ Electrical Characteristics (Ta = 25°C) Item Input Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 mA VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- --- 4 mA IO = 100 mA Maximum resistance with output ON RON --- 1.0 1.5 W IF = 5 mA, IO = 300 mA, t < 1 s Current leakage when the relay is open ILEAK --- --- 1.0 nA VOFF = 30 V, Ta = 50°C Capacity between terminals COFF --- 10.0 14.0 pF V = 0, f = 100 MHz, t<1s Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MW VI-O = 500 VDC, RoH £ 60% IF = 10 mA, RL = 200 W, VDD = 20 V (See note 2.) Output Turn-ON time tON --- --- 0.5 ms Turn-OFF time tOFF --- --- 0.5 ms Note: 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 RL VDD VOUT IF VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Output dielectric strength VDD --- --- Operating LED forward current IF 10 Continuous load current IO --- Operating temperature Ta 25 --- Maximum Unit 32 V --- 30 mA --- 300 mA 60 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to page 6 for precautions common to all G3VM models. Load current (mA) G3VM-41GR5 500 400 300 200 100 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 53