Ordering number : ENN3463B 2SK1460LS N-Channel Silicon MOSFET 2SK1460LS Ultrahigh-Speed Switching Applications Features • • • Package Dimensions Low ON-resistance. Ultrahigh-speed switching. Micaless package facilitating mounting. unit : mm 2078C [2SK1460LS] 10.0 4.5 2.8 0.6 16.1 16.0 3.5 7.2 3.2 1.2 1.2 14.0 3.6 0.9 0.75 0.7 1 2 3 2.4 1 : Gate 2 : Drain 3 : Source Specifications 2.55 Absolute Maximum Ratings at Ta=25°C Parameter Symbol 2.55 SANYO : TO-220FI(LS) Conditions Ratings Unit Drain-to-Source Voltage VDSS 900 Gate-to-Source Voltage VGSS ±30 V ID 3.5 A Drain Current (DC) Drain Current (Pulse) IDP PW≤10µs, duty cycle≤1% V 7 A 2.0 W Allowable Power Dissipation PD 40 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Tc=25°C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Conditions V(BR)DSS Ratings min ID=1mA, VGS=0 VDS=900V, VGS=0 VGS=±30V, VDS=0 900 IDSS IGSS VGS(off) yfs VDS=10V, ID=1mA VDS=20V, ID=2A 2.0 typ 1.0 Marking : K1460 max Unit V 1.0 mA ±100 nA 3.0 2.0 V S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N3001 TS IM TA-3433 / 61599 TH (KT) / 72597 TS (KOTO) / 6131 JN (KOTO) No.3463-1/4 2SK1460LS Continued from preceding page. Parameter Symbol Static Drain-to-Source On-State Resistance RDS(on) Ciss ID=2A, VGS=10V VDS=20V, f=1MHz Output Capacitance Coss Reverse Transfer Capacitance Crss VDS=20V, f=1MHz VDS=20V, f=1MHz Turn-ON Delay Time td(on) Rise Time tr td(off) Input Capacitance Turn-OFF Delay Time Fall Time min typ 2.8 ID=2A, VGS=10V, VDD=200V, RGS=50Ω ID=2A, VGS=10V, VDD=200V, RGS=50Ω VSD Unit max Ω 3.6 700 pF 300 pF 170 pF ID=2A, VGS=10V, VDD=200V, RGS=50Ω ID=2A, VGS=10V, VDD=200V, RGS=50Ω tf Diode Forward Voltage Ratings Conditions 15 ns 35 ns 200 ns 65 ns IS=3.5A, VGS=0 1.8 V (Note) Be careful in handling the 2SK1460LS because it has no protection diode between gate and source. Switching Time Test Circuit VDD 200V ID=2A RL=100Ω VGS 10V PW=1µs D.C.≤0.5% D VOUT S 2SK1460LS G P.G RGS 50Ω ID -- VDS 6 V V 0 =1 GS 4 0V =1 S VG 8 6V Drain Current, ID -- A Drain Current, ID -- A 5 ID -- VDS 10 5V 3 2 4V 6V 6 5V 4 4V 2 1 3V 0 0 0 4 8 12 16 20 Drain-to-Source Voltage, VDS -- V 75°C Drain Current, ID -- A 4 40 50 60 ITR01597 VGS=10V 7 6 25°C 30 ID -- Tc 8 Tc= --25°C 5 20 Drain-to-Source Voltage, VDS -- V VDS=20V 7 10 0 ITR01596 ID -- VGS 8 Drain Current, ID -- A 24 3 2 1 6 5 4 V DS = 20V 3 2 10V 1 0 0 2 4 6 8 10 Gate-to-Source Voltage, VGS -- V 12 14 ITR01598 0 --60 --40 --20 0 20 40 60 80 100 Case Temperature, Tc -- °C 120 140 160 ITR01599 No.3463-2/4 2SK1460LS VGS(off) -- Tc 5 Switching Time, SW Time -- ns 3 2 1 0 --20 20 40 60 80 100 120 Case Temperature, Tc -- °C Static Drain-to-Source On-State Resistance, RDS(on) -- Ω 140 3 td (off ) 2 100 7 tf 5 tr 3 2 td(on) 5 160 Tc=25°C ID=2A 4 3 2 4 6 8 10 12 Gate-to-Source Voltage, VGS -- V 3 1.0 7 20V VDS=10V 2 5 3 2 7 ITR01601 5 0V =1 S G V V 20 4 3 2 1 --40 --20 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 ITR01603 yfs -- ID 5 0.1 VDS=20V C 25° 3 2 °C = Tc 1.0 5 --2 75° C 7 5 3 2 0.1 5 7 0.1 2 3 5 7 2 1.0 3 5 5 7 10 ITR02940 Drain Current, ID -- A 2 0.1 3 5 7 2 1.0 3 IDP=7A 7 5 <5µs µs Drain Current, ID -- A 3 Ciss 7 5 3 Cos s 2 Cr ss 100 7 2 12 16 20 24 28 32 ITR01605 s 1m s 0.1 3 2 8 10 DC 100 ms Operation in op ms er this area is ati on limited by RDS(on). 3 3 2 Drain-to-Source Voltage, VDS -- V 0µ 1.0 7 5 7 5 4 10 2 5 0 7 10 ITR01604 10 IDP=3.5A 2 1000 5 ASO 10 VGS=0 f=1MHz 3 7 Drain Current, ID -- A Ciss, Coss, Crss -- VDS 5 Ciss, Coss, Crss -- pF 2 10 6 0 --60 14 Tc=25°C 5 7 ITR01602 yfs -- ID 5 3 RDS(on) -- Tc 8 Forward Transfer Admittance, yfs -- S 2 2 1.0 Drain Current, ID -- A 1 0 7 ITR01600 RDS(on) -- VGS 5 Forward Transfer Admittance, yfs -- S VDD=200V VGS=10V P.W.=1µs D.C≤0.5% 10 --40 Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Cutoff Voltage, VGS(off) -- V 4 0 --60 SW Time -- ID 5 VDS=10V ID=1mA Tc=25°C Single pulse 2 3 5 7 10 2 3 5 7 100 2 3 5 Drain-to-Source Voltage, VDS -- V 7 1000 2 ITR01606 No.3463-3/4 2SK1460LS PD -- Ta 2.0 1.6 No he at 1.2 PD -- Tc 50 Allowable Power Dissipation, PD -- W Allowable Power Dissipation, PD -- W 2.4 sin k 0.8 0.4 0 40 30 20 10 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 ITR01607 0 20 40 60 80 100 120 140 Case Temperature, Tc -- °C 160 ITR01608 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. PS No.3463-4/4