74ACT125 QUAD BUS BUFFERS (3-STATE) PRELIMINARY DATA ■ ■ ■ ■ ■ ■ ■ ■ ■ HIGH SPEED: tPD = 6.5 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 8 µA (MAX.) at TA = 25 oC COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN), VIL = 0.8V (MAX) 50Ω TRANSMISSION LINE DRIVING CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 4.5V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 125 IMPROVED LATCH-UP IMMUNITY DESCRIPTION The ACT125 is an high-speed CMOS QUAD BUS BUFFERS fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power applications maintaining high speed operation similar to B M (Plastic Package) (Micro Package) ORDER CODES : 74ACT125B 74ACT125M equivalent Bipolar Schottky TTL. These devices require the same 3-STATE control input G to be taken high to make the output go in to the high impedance state. The device is designed to interface directly High Speed CMOS systems with TTL, NMOS and CMOS output voltage levels. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. PIN CONNECTION AND IEC LOGIC SYMBOLS May 1997 1/8 74ACT125 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND F UNCTIO N 1, 4, 10, 13 G1 to G4 Output Enable Inputs 2, 5, 9, 12 A1 to A4 Data Inputs 3, 6, 8, 11 Y1 to Y4 Data Outputs 7 GND Ground (0V) 14 VCC Positive Supply Voltage TRUTH TABLE A G Y X H Z L L L H L H ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter Supply Voltage Value Unit -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO DC Output Current ± 50 mA ± 200 mA ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) -65 to +150 o C 300 o C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. RECOMMENDED OPERATING CONDITIONS Symbol VCC Valu e Unit Supply Voltage Parameter 4.5 to 5.5 V V VI Input Voltage 0 to VCC VO Output Voltage 0 to VCC Top Operating Temperature: dt/dv Input Rise and Fall Time VCC = 4.5 to 5.5V (note 1) 1) VIN from 0.8 V to 2.0 V 2/8 -40 to +85 8 V o C ns/V 74ACT125 DC SPECIFICATIONS Symbol Parameter Test Con dition s VIH High Level Input Voltage 4.5 5.5 VIL Low Level Input Voltage 4.5 5.5 VOH High Level Output Voltage 4.5 5.5 Low Level Output Voltage VO = 0.1 V or VCC - 0.1 V Min. Typ. 2.0 1.5 2.0 2.0 1.5 2.0 VO = 0.1 V or VCC - 0.1 V (*) VI = V IH or V IL Unit -40 to 85 o C Max. Min . Max. V 1.5 0.8 0.8 1.5 0.8 0.8 IO=-50 µA 4.4 4.49 4.4 IO=-50 µA 5.4 5.49 5.4 V V IO=-24 mA 3.86 5.5 IO=-24 mA 4.86 4.5 IO=50 µA 0.001 0.1 0.1 IO=50 mA 0.001 0.1 0.1 IO=24 mA 0.36 0.44 IO=24 mA 0.36 0.44 ±0.1 ±1 µA ±0.5 ±5 µA 1.5 mA 80 µA 4.5 VOL Value T A = 25 oC V CC (V) 5.5 4.5 5.5 V I (*) = V IH or V IL 3.76 4.76 V Input Leakage Current 5.5 VI = VCC or GND IOZ 3 State Output Leakage Current 5.5 VI = VIH or VIL VO = VCC or GND ICCT Max ICC /Input 5.5 VI = VCC -2.1 V ICC Quiescent Supply Current 5.5 VI = VCC or GND IOLD Dynamic Output Current (note 1, 2) 5.5 VOLD = 1.65 V max 75 mA VOHD = 3.85 V min -75 mA II IOHD 0.6 8 1) Maximum test duration 2ms, one output loaded at time 2) Incident wave switching is guaranteed on transmission lines with impedances as low as 50 Ω. (*) All outputs loaded. 3/8 74ACT125 AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 Ω, Input tr = t f =3 ns) Symbol Parameter T est Cond ition V CC (V) Value T A = 25 oC -40 to 85 o C Min. Typ. Max. Min . Max. Unit (*) 1.0 6.5 9.0 1.0 10.0 ns (*) 1.0 6.0 8.5 1.0 9.5 ns (*) 1.0 7.0 9.5 1.0 10.5 ns tPLH tPHL Propagation Delay Time 5.0 tPZL tPZH Output Enable Time 5.0 tPLZ tPHZ Output Disable Time 5.0 (*) Voltage range is 5V ± 0.5V CAPACITIVE CHARACTERISTICS Symbol Parameter Test Con dition s V CC (V) Value o T A = 25 C Min. Typ. Max. Unit o -40 to 85 C Min . Max. Input Capacitance 5.0 4 pF C OUT Output Capacitance 5.0 8 pF C PD Power Dissipation Capacitance (note 1) 5.0 TBD pF CIN 1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD • VCC • fIN + ICC/n (per circuit) TEST CIRCUIT TEST SWITCH t PLH, tPHL Open t PZL, tPLZ 2VCC t PZH, tPHZ Open CL = 50 pF or equivalent (includes jig and probe capacitance) RL = R1 = 500Ω or equivalent RT =ZOUT of pulse generator (typically 50Ω) 4/8 74ACT125 WAVEFORM 1: PROPAGATION DELAYS (f=1MHz; 50% duty cycle) WAVEFORM 2: OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cycle) 5/8 74ACT125 Plastic DIP-14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 6/8 74ACT125 SO-14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8 (max.) P013G 7/8 74ACT125 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1997 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 8/8