MJD122-1 / MJD122T4 MJD127-1 / MJD127T4 COMPLEMENTARY POWER DARLINGTON TRANSISTORS Ordering Code MJD122T4 MJD122-1 MJD127T4 MJD127-1 Marking MJD122 MJD122 MJD127 MJD127 Package TO-252 TO-251 TO-252 TO-251 (DPAK) (IPAK) (DPAK) (IPAK) Shipment Tape & Reel Tube Tape & Reel Tube 3 ■ ■ ■ ■ ■ ■ 3 STMicroelectronics PREFERRED SALESTYPES LOW BASE-DRIVE REQUIREMENTS INTEGRATED ANTIPARALLEL COLLECTOR-EMITTER DIODE THROUGH HOLE TO-251 (IPAK) POWER PACKAGE IN TUBE (SUFFIX “-1”) SURFACE MOUNTING TO-252 (DPAK) POWER PACKAGE IN TAPE & REEL (SUFFIX “T4”) ELECTRICALLY SIMILAR TO TIP122 AND TIP127 1 2 1 TO-251 TO-252 DPAK (Suffix ”T4”) IPAK (Suffix ”-1”) INTERNAL SCHEMATIC DIAGRAM APPLICATIONS: ■ GENERAL PURPOSE SWITCHING AND AMPLIFIER DESCRIPTION The MJD122 and MJD127 form complementary NPN - PNP pair. They are manufactured using Epi taxial Bas e technology for cost-eff ective performance. R 2 Typ. = 150 Ω R1 Typ. = 10 KΩ ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value NPN MJD122 PNP MJD127 Unit VCBO Collector-Base Voltage (IE = 0) 100 V VCEO Collector-Emitter Voltage (IB = 0) 100 V VEBO Emitter-Base Voltage (IC = 0) 5 V Collector Current 5 A Collector Peak Current (tp < 5 ms) 8 A IC ICM IB Base Current 0.1 A P tot Total Dissipation at Tc = 25 °C 20 W Tstg Storage Temperature –65 to 150 °C 150 °C Tj Max. Operating Junction Temperature For PNP types voltage and current values are negative. August 2002 1/8 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 THERMAL DATA Rthj-case R thj-amb Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max Max °C/W °C/W 6.25 100 ELECTRICAL CHARACTERISTICS (Tj = 25 °C unless otherwise specified) Symbol Max. Unit ICBO Collector Cut-off Current (IE = 0) Parameter VCB = 100 V 10 µA ICEO Collector Cut-off Current (IB = 0) VCE = 50 V 10 µA ICEX Collector Cut-off Current (VBE = -1.5 V) VCE = 100 V VCE = 100 V 10 500 µA µA IEBO Emitter Cut-off Current (IC = 0) VEB = 5 V 2 mA VCEO(sus)* Collector-Emitter Sustaining Voltage (IB = 0) Test Conditions Min. Tj = 125 °C IC = 30 mA Typ. 100 V VCE(sat)* Collector-Emitter Saturation Voltage IC = 4 A IC = 8 A IB = 16 mA IB = 80 mA 2 4 V V VBE(sat)* Base-Emitter Saturation Voltage IC = 8 A IB = 80 mA 4.5 V VBE(on)* Base-Emitter On Voltage IC = 4 A VCE = 4 V 2.8 V hFE* DC Current Gain IC = 4 A IC = 8 A VCE = 4 V VCE = 4 V * Pulsed: Pulse duration = 300 µs, duty cycle ≤ 2 %. For PNP types voltage and current values are negative. 2/8 1000 100 12000 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 Safe Operating Area Derating Curve Collector-Emitter Saturation Voltage (NPN type) Collector-Emitter Saturation Voltage (PNP type) Base-Emitter Saturation Voltage (NPN type) Base-Emitter Saturation Voltage (PNP type) 3/8 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 Base-Emitter On Voltage (NPN type) Base-Emitter On Voltage (PNP type) DC Current Gain (NPN type) DC Current Gain (PNP type) Switching Times Resistive Load (NPN type) Switching Times Resistive Load (PNP type) 4/8 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 Freewheel Diode Forward Voltage (NPN type) Freewheel Diode Forward Voltage (PNP type) 5/8 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 2.20 2.40 0.087 0.094 A1 0.90 1.10 0.035 0.043 A3 0.70 1.30 0.028 0.051 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 B3 0.85 B5 0.033 0.30 B6 0.012 0.95 0.037 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.237 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 15.90 16.30 0.626 0.642 L 9.00 9.40 0.354 0.370 L1 0.80 1.20 0.031 L2 0.80 V1 10o 1.00 0.047 0.031 0.039 10o P032N_E 6/8 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 2.20 2.40 0.087 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.398 L2 L4 V2 0.8 0.60 0 o 0.031 1.00 8 o 0.024 0 o 0.039 0 o P032P_B 7/8 MJD122-1 / MJD122T4 / MJD127-1 / MJD127T4 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 8/8