QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Features Description ■ No contact switching The QVE00033 is a miniature slotted optical switch designed for surface mount applications. It consists of a GaAs LED and a silicon phototransistor facing each other across a 2mm gap, and packaged in a temperature resistant black plastic housing. ■ Transistor Output ■ Compact surface mount package ■ Opaque black plastic housing ■ 2mm wide slot ■ 0.4 mm aperture width ■ Tape and reel ■ Reflow conditions: Preheat = 160°C for 120 seconds Reflow = 200°C for 60 seconds (peak = 240°C) HL-94V-0 housing ■ Package Dimension 0.079 (2.00) 0.016 (0.40) 0.049 (1.25) 0.159 (4.05) 0.165 (4.20) 0.276±0.01 (7.00±0.25) SECTION "A-A" 0.240 (6.10) "A" 0.146 (3.70) 0.213 (5.40) DIMPLE RIGHT VIEW 0.010±0.002 (4X) (0.25±0.05) 0.020±0.002 (4X) (0.50±0.05) "A" 0.059±0.008 (1.50±0.20) 0.295 (7.50) 0.039±0.002 (4X) (1.00±0.05) ANODE 1 4 2 3 COLLECTOR 0.020±0.002 (0.50±0.05) (4X) 0.039±0.002 (1.00±0.05) (4X) 0.099 (2.50) CATHODE EMITTER BOTTOM VIEW Note: 1. Dimensions for all drawings are in inches (millimeters). Tolerance ±0.005" (0.127mm) unless othewise specified. ©2005 Fairchild Semiconductor Corporation QVE00033 Rev. 1.0.0 1 www.fairchildsemi.com QVE00033 Phototransistor Optical Surface Mount Interrupter Switch November 2005 Parameter Symbol Rating Units Operating Temperature TOPR -55 to +100 °C Storage Temperature TSTG -55 to +100 °C Soldering Temperature (Iron)(2,3,4) TSOL-I 240 for 5 sec °C Soldering Temperature (Flow)(2,3) TSOL-F 260 for 10 sec °C PTOT 100 mW Continuous Forward Current IF 50 mA Reverse Voltage VR 6 V PD 75 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 4.5 V IC 20 mA PD 75 mW Total Power Dissipation Emitter Power Dissipation(1) Sensor Collector Current Power Dissipation(1) Electrical/Optical Characteristics (TA = 25°C unless otherwise specified) Parameter Test Conditions Symbol Min. Typ. Max. Units Emitter Forward Voltage IF = 20 mA VF — 1.2 1.4 V Reverse Current VR = 4 V IR — — 10 µA Peak Emission Wavelength IF = 20 mA lPE — 940 — nm VCE = 20 V, IF = 0 mA ICEO — — 100 nA IF = 5 mA, VCE = 5 V IC(ON) 100 — 600 µA Sensor Dark Current Coupled Collector Current Collector Emitter IF = 10 mA, IC = 40 µA VCE (SAT) — — 0.4 V Rise Time VCC = 5 V, RL = 1000 Ω tr — 7 150 µs Fall Time IC = 100 µA tf — 7 150 µs Notes: 1. Derate power dissipation linearly 1.67 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron tip 1/16" (1.6mm) from housing. 2 QVE00033 Rev. 1.0.0 www.fairchildsemi.com QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Ic(on)-Normalized Collector Current Ic(on)-Normalized Collector Current TA =25°C IF=5mA VCE=5V 1.0 Normalized to value with shield removed .8 .6 Black Shield .4 + E d2 0 D + .2 0.0 0 1 2 3 4 TA =25°C IF=5mA VCE=5V 1.0 .8 .6 .4 Black Shield d1 0 .2 0.0 0 1 d2-Shield Distance (mm) 4 18 TA =25°C ICE-Normalized Collector Current 1.4 IF=20mA 1.2 1.0 ICE (mA) 2 3 d1-Shield Distance (mm) Figure 2. Normalized Collector Current Vs. Shield Distance Figure 1. Normalized Collector Current Vs. Shield Distance .8 .6 IF=10mA .4 IF=5mA .2 IF=1mA 0.0 Normalized to value with shield removed 16 14 12 10 TA=25°C VCE=5V Normalized to IF=5mA 8 6 4 2 0 0 2 4 6 8 10 12 0 10 VCE (V) 20 30 40 50 IF-Forward Current (mA) Figure 3. Collector Current Vs. Collector-Emitter Voltage Figure 4. Normalized Collector Current Vs. Forward Current 8 TA=25°C PW=300µs PRR=100µs VCC=5V Normalized to RL=1k T(on) 6 T(on) Normalized T(off) Normalized 1.0 T(off) TA=25°C PW=300µs PRR=100µs VCC=5V Normalized to RL=1k 4 2 .8 .6 .4 .2 0 0 2 4 6 8 0 10 RL (kΩ) Figure 5. Rise Time vs. Load Resistance 4 6 8 10 RL (kΩ) Figure 6. Fall Time vs. Load Resistance 3 QVE00033 Rev. 1.0.0 2 www.fairchildsemi.com QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Typical Performance Characteristics QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Recommended Printed Circuit Board Pattern (For Reference Only) Mounting Center 0.62 1.11 0.85 2.50 1.92 1.85 4 QVE00033 Rev. 1.0.0 www.fairchildsemi.com 0.65 [16.5] R0.24 [R6.0] 0.24 [6.00] R6.5 [R165.0] R6.3 [R160.0] B R0.31 [R8.0] 3.94 [100.0] Ø3.54 [Ø90.0] R1.97 [R50.0] R5.16 [R131.0] 0.83 [21.10] R2.17 [R55.0] 0.09 [2.3] R0.27±0.047 [R6.75±1.20] 0.43 [10.75] VIEW B 0.30 [7.60] 0.256 [6.50] Max A 0.059 [1.50] 0.157 [4.00] Ø0.059 MIN 0.069 [1.75] 0.232 [5.90] 0.014 [0.35] 0 [0] min 0.295 [7.50] 0.476 [12.10] Max 0.630 [16.00] 0.005 [0.127] max 0.185 [4.70] 0.079 [2.00] 0.472 [12.00] 0.378 [9.60] Max COVER TAPE EMBOSSMENT DIMPLE 0.213 [5.40] ANODE (PIN1) FACING SPROCKET HOLE USER DIRECTION Quantitiy of units per reel is 800. VIEW A SCALE: 2:1 UNIT IN CAVITY 5 QVE00033 Rev. 1.0.0 QVE00033 ASSEMBLY www.fairchildsemi.com QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Tape and Reel Dimensions The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I17 6 QVE00033 Rev. 1.0.0 www.fairchildsemi.com QVE00033 Phototransistor Optical Surface Mount Interrupter Switch TRADEMARKS