DISCRETE SEMICONDUCTORS DATA SHEET M3D319 BAS716 Low-leakage diode Product specification 2003 Nov 07 Philips Semiconductors Product specification Low-leakage diode BAS716 FEATURES PINNING • Plastic SMD package PIN • Low leakage current: typ. 0.2 nA • Switching time: typ. 0.6 µs • Continuous reverse voltage: max. 75 V • Repetitive peak reverse voltage: max. 85 V • Repetitive peak forward current: max. 500 mA. 1 cathode 2 anode handbook, halfpage1 APPLICATION • Low leakage current applications in surface mounted circuits. DESCRIPTION 2 Top view MAM408 Marking code: S1. The marking bar indicates the cathode. DESCRIPTION Epitaxial medium-speed switching diode with a low leakage current in an ultra small SOD523 (SC-79) SMD plastic package. Fig.1 Simplified outline (SOD523; SC-79) and symbol. ORDERING INFORMATION PACKAGE TYPE NUMBER NAME − BAS716 DESCRIPTION VERSION plastic surface mounted package; 2 leads SOD523 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT − 85 V − 75 V − 200 mA − 500 mA tp = 1 µs − 4 A tp = 1 ms − 1 A VRRM repetitive peak reverse voltage VR continuous reverse voltage IF continuous forward current IFRM repetitive peak forward current IFSM non-repetitive peak forward current square wave; Tj = 25 °C prior to surge; see Fig.4 see Fig.2; note 1 − 0.5 A − 250 mW storage temperature −65 +150 °C junction temperature − 150 °C tp = 1 s Ptot total power dissipation Tstg Tj Tamb = 25 °C; note 1 Note 1. Device mounted on a FR4 printed-circuit board. 2003 Nov 07 2 Philips Semiconductors Product specification Low-leakage diode BAS716 ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL VF IR PARAMETER forward voltage reverse current CONDITIONS TYP. MAX. UNIT IF = 1 mA 0.77 0.9 V IF = 10 mA 0.85 1 V IF = 50 mA 0.92 1.1 V IF = 150 mA 1.02 1.25 V VR = 75 V 0.2 5 nA VR = 75 V; Tj = 150 °C 3 80 nA VR = 100 V 0.3 − nA Cd diode capacitance VR = 0 V; f = 1 MHz; see Fig.6 2 − pF trr reverse recovery time when switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA 0.6 3 µs THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS VALUE UNIT Rth j-a thermal resistance from junction to ambient note 1 450 K/W Rth j-s thermal resistance from junction to soldering point note 2 120 K/W Notes 1. Device mounted on a FR4 printed-circuit board. Refer to SOD523 (SC-79) standard mounting conditions. 2. Soldering point of the cathode tab. 2003 Nov 07 3 Philips Semiconductors Product specification Low-leakage diode BAS716 GRAPHICAL DATA MHC323 300 MLB752 - 1 300 handbook, halfpage handbook, halfpage IF (mA) IF (mA) 200 200 100 100 (1) (2) (3) 0 0 100 0 Tamb (°C) 0 200 0.8 1.2 V F (V) 1.6 (1) Tj = 150 °C; typical values. (2) Tj = 25 °C; typical values. (3) Tj = 25 °C; maximum values. Device mounted on a FR4 printed-circuit board. Fig.2 0.4 Maximum permissible continuous forward current as a function of ambient temperature. Fig.3 Forward current as a function of forward voltage. MBG704 102 handbook, full pagewidth IFSM (A) 10 1 10−1 1 10 102 103 tp (µs) Based on square wave currents; Tj = 25 °C prior to surge. Fig.4 Maximum permissible non-repetitive peak forward current as a function of pulse duration. 2003 Nov 07 4 104 Philips Semiconductors Product specification Low-leakage diode BAS716 MDB826 102 handbook, halfpage MDB827 2.0 handbook, halfpage Cd (pF) IR (nA) (1) 1.5 10 1.0 (2) 1 0.5 10−1 0 50 100 150 Tj (°C) 0 200 0 VR = 75 V. (1) Maximum values. (2) Typical values. Fig.5 5 10 15 V (V) 20 R f = 1 MHz; Tj = 25 °C. Reverse current as a function of junction temperature. Fig.6 handbook, full pagewidth tr Diode capacitance as a function of reverse voltage; typical values. tp t D.U.T. RS = 50 Ω V = VR I F x R S IF 10% IF SAMPLING OSCILLOSCOPE t R i = 50 Ω MGA881 (1) 90% VR input signal (1) IR = 1 mA. Input signal: reverse pulse rise time tr = 0.6 ns; reverse voltage pulse duration tp = 100 ns; duty factor δ = 0.05; Oscilloscope: rise time tr = 0.35 ns. Fig.7 Reverse recovery voltage test circuit and waveforms. 2003 Nov 07 t rr 5 output signal Philips Semiconductors Product specification Low-leakage diode BAS716 PACKAGE OUTLINE Plastic surface mounted package; 2 leads SOD523 A c v M A HE A D 1 E 0 0.5 1 mm scale 2 DIMENSIONS (mm are the original dimensions) bp (1) UNIT A bp c D E HE v mm 0.65 0.58 0.34 0.26 0.17 0.11 1.25 1.15 0.85 0.75 1.65 1.55 0.1 Note 1. The marking bar indicates the cathode. OUTLINE VERSION SOD523 2003 Nov 07 REFERENCES IEC JEDEC JEITA SC-79 6 EUROPEAN PROJECTION ISSUE DATE 98-11-25 02-12-13 Philips Semiconductors Product specification Low-leakage diode BAS716 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2003 Nov 07 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA75 © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R76/01/pp8 Date of release: 2003 Nov 07 Document order number: 9397 750 11999