ER2A~ER2J SURFACE MOUNT RECTIFIER VOLTAGE 50 to 600 Volts CURRENT 2.0 Amperes FEATURES • For surface mounted applications • High temperature metallurgically bonded-no compression contacts as found in other diode-constructed rectifiers • Glass passivated junction • Built-in strain relief • Easy pick and place • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • In compliance with EU RoHS 2002/95/EC directives MECHANICALDATA • Case: JEDEC DO-214AA molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Indicated by cathode band • Standard packaging: 16mm tape (EIA-481) • Weight: 0.0032 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL ER2A ER2B ER2C ER2D ER2E ER2G ER2J UNITS Maximum Recurrent Peak Reverse Voltage VR R M 50 100 150 200 300 400 600 V Maximum RMS Voltage VR M S 35 70 105 140 210 280 420 V Maximum DC Blocking Voltage VD C 50 100 150 200 300 400 600 V Maximum Average Forward Current at TL=110OC IF (A V ) 2.0 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load(JEDEC method) IF S M 50 A Maximum Forward Voltage at 2.0A VF Maximum DC Reverse Current TJ=25 O C at Rated DC Blocking VoltageTJ=100 O C IR 1.0 150 µA Maximum Reverse Recovery Time (Note 1) trr 35 ns Typical Junction capacitance (Note 2) CJ 25 pF Typical thermal Resistance (Note 3) RθJL 20 TJ ,TS T G -55 to +150 Operating Junction and Storage Temperature Range 0.95 1.25 1.7 V O C/W O C NOTES:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and applied Vr = 4.0 volts. 3. 8.0 mm2 ( .013mm thick ) land areas. STAD-MAR.06.2009 PAGE . 1 ER2A~ER2J RATING AND CHARACTERISTIC CURVES 70 60 2.4 2 .0 CAPACITANCE, pF AVERAGE FORWARD RECIFIED CURRENT AMPERES 2.8 1.6 1 .2 .8 SINGLE PHASE, HALF-WAVE, 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.3 x 0.3" (8.0 x 8.0 mm)COPPER PAD AREAS .4 20 40 60 80 40 30 20 O TJ = 25 C f = 1.0MHZ Vsig = 50mVp-p 10 0 0 50 100 120 140 160 180 0 0.1 O LEAD TEMPERATURE, C 1 10 100 1000 REVERSE VOLTAGE, VOLTS FIG.2 TYPICAL JUNCTION CAPACITANCE FIG.1 MAXIMUM AVERAGE FORWARD CURRENT RATING 100 INSTANTANEOUS FORWARD CURRENT AMPERES INVSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 O TJ= 125 C 100 O TJ= 75 C 10 1.0 0.1 O TJ= 25 C 20 40 60 80 100 10 50-200V 300-400V 1.0 600V 0.1 O T J = 25 C 120 .01 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 PERCENT OF RATED PEAK INVERSE VOLTGE, VOLTS INSTANTANEOUS FORWARD VOLTAGE VOLTS FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL FORWARD CHARACTERISTICS FORWARD SURGE CURRENT, AMPERES (HALF-SING WAVE) 60 50 40 30 20 10 8.3ms SINGLE HALF SINE-WAVE JEDC METHOD 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPEITIVE SURGE CURRENT STAD-MAR.06.2009 PAGE . 2 ER2A~ER2J MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5Kper 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2009 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. STAD-MAR.06.2009 PAGE . 3