SEMiX303GD12E4c Absolute Maximum Ratings Symbol Conditions Values Unit IGBT VCES IC Tj = 175 °C 1200 V Tc = 25 °C 466 A Tc = 80 °C 359 A 300 A ICnom ICRM SEMiX® 33c Trench IGBT Modules ICRM = 3xICnom 900 A -20 ... 20 V 10 µs -40 ... 175 °C Tc = 25 °C 338 A Tc = 80 °C 252 A 300 A VGES tpsc VCC = 800 V VGE ≤ 20 V VCES ≤ 1200 V Tj = 150 °C Tj Inverse diode IF SEMiX303GD12E4c Tj = 175 °C IFnom Features • Homogeneous Si • Trench = Trenchgate technology • VCE(sat) with positive temperature coefficient • High short circuit capability • UL recognized, file no. E63532 IFRM IFRM = 3xIFnom 900 A IFSM tp = 10 ms, sin 180°, Tj = 25 °C 1485 A -40 ... 175 °C Tj Module It(RMS) Tstg Visol AC sinus 50Hz, t = 1 min 600 A -40 ... 125 °C 4000 V Typical Applications* • AC inverter drives • UPS • Electronic Welding Characteristics Symbol Conditions min. typ. max. Unit Tj = 25 °C 1.8 2.05 V Tj = 150 °C 2.2 2.4 V VCE0 Tj = 25 °C 0.8 0.9 V Tj = 150 °C 0.7 0.8 V rCE Tj = 25 °C 3.3 3.8 mΩ 5.0 5.3 mΩ 5.8 6.5 V 0.1 0.3 mA IGBT Remarks • Case temperature limited to TC=125°C max. • Product reliability results are valid for Tj=150°C VCE(sat) IC = 300 A VGE = 15 V chiplevel VGE = 15 V Tj = 150 °C VGE(th) VGE=VCE, IC = 11.4 mA ICES VGE = 0 V VCE = 1200 V Cies Coes Cres VCE = 25 V VGE = 0 V QG VGE = - 8 V...+ 15 V RGint Tj = 25 °C VCC = 600 V IC = 300 A td(on) tr Eon Tj = 25 °C Tj = 150 °C 18.5 nF f = 1 MHz 1.22 nF f = 1 MHz Tj = 150 °C 1.03 nF 1695 nC 2.50 Ω 213 ns Tj = 150 °C 60 ns Tj = 150 °C 29.4 mJ 535 ns 113 ns 41.8 mJ Eoff Rth(j-c) per IGBT tf mA f = 1 MHz RG on = 1.8 Ω Tj = 150 °C RG off = 1.8 Ω di/dton = 4840 A/µs Tj = 150 °C di/dtoff = 2980 A/µs Tj = 150 °C td(off) 5 0.095 K/W GD © by SEMIKRON Rev. 0 – 05.05.2010 1 SEMiX303GD12E4c Characteristics Symbol Conditions Inverse diode VF = VEC IF = 300 A VGE = 0 V chip VF0 rF SEMiX® 33c IRRM Qrr Trench IGBT Modules Err Rth(j-c) SEMiX303GD12E4c • Homogeneous Si • Trench = Trenchgate technology • VCE(sat) with positive temperature coefficient • High short circuit capability • UL recognized, file no. E63532 Typical Applications* • AC inverter drives • UPS • Electronic Welding Tj = 25 °C Tj = 150 °C typ. max. Unit 2.2 2.52 V 2.2 2.5 V Tj = 25 °C 1.1 1.3 1.5 V Tj = 150 °C 0.7 0.9 1.1 V Tj = 25 °C 2.7 3.0 3.4 mΩ 4.2 4.6 mΩ Tj = 150 °C IF = 300 A Tj = 150 °C di/dtoff = 5200 A/µs T = 150 °C j VGE = -15 V T j = 150 °C VCC = 600 V per diode 3.5 300 A 50 µC 22.9 mJ 0.18 K/W Module LCE RCC'+EE' Features min. res., terminal-chip Rth(c-s) per module Ms to heat sink (M5) 20 nH TC = 25 °C 0.7 mΩ TC = 125 °C 1 mΩ 0.014 to terminals (M6) Mt K/W 3 5 Nm 2.5 5 Nm Nm w 900 g Temperatur Sensor R100 Tc=100°C (R25=5 kΩ) B100/125 R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; 493 ± 5% Ω 3550 ±2% K Remarks • Case temperature limited to TC=125°C max. • Product reliability results are valid for Tj=150°C GD 2 Rev. 0 – 05.05.2010 © by SEMIKRON SEMiX303GD12E4c Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic © by SEMIKRON Rev. 0 – 05.05.2010 3 SEMiX303GD12E4c Fig. 7: Typ. switching times vs. IC Fig. 8: Typ. switching times vs. gate resistor RG Fig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge 4 Rev. 0 – 05.05.2010 © by SEMIKRON SEMiX303GD12E4c SEMiX 33c pinout This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our personal. © by SEMIKRON Rev. 0 – 05.05.2010 5