Features LED DRIVER ● ● ● ● ● ● ● ● ● ● ● LIGHTLINE 12W AC/DC LED Power Supply 350mA or 700mA Constant Current Output Drives 1 - 10 High Brightness LEDs Universal AC Input Active Power Factor Corrected >0.95 Fused Input, Protected Output 3kVAC Input/Output Isolation Output Socket Connector UL-8750 Certified Low Cost 5 Year Warranty AC/DC-Converter Description A compact 12W constant current switching power module suitable for driving up to ten high power LEDs (Vf = 3.6V). The output current is fixed at 350mA, 500mA or 700mA. Active power factor correction is standard and the converters are UL8750 certified for use with LED assemblies. The driver modules features both screw terminal and socket output connections. The socket connecter avoids the possibility of miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting. 12 Watt PFC Single Output Selection Guide Part Number Nominal Input Voltage (VAC) Input Current at 230VAC (mA) Output Output Voltage Range Current (VDC) (mA) Max # LEDs RACD12-350 universal 200 3-36 350 10 x 1W RACD12-700 universal 200 3-15 700 4 x 2W, 8 x 1W RoHS 2002/95/EC 6/6 RACD12 Specifications (typical at 25°C and after warm up time unless otherwise specified ) Input Voltage Range 47-63 Hz Power Factor Output Voltage Range Full Load, 115VAC/230VAC 350mA Version 700mA Version Inrush Current (<2mS) 115VAC/230VAC Input Current 230VAC, Full Load Leakage Current Input Fuse 115VAC/240VAC - 60/50Hz Standard 0.95 3 - 36VDC 3-15VDC 10A max. 200mA max. 0.5mA typ. T1A (combined Tolerance, Load Regulation and Line Regulation) Minimum Load Open Circuit Protected ±10%. 1 LED Output Ripple 150mA max. Hold Up Time 18ms min. Operating Frequency 50-120kHz typ. Efficiency at Full Load 78% RMS Isolation Voltage (input to output) 3kVAC / 1 minute Temperature Coefficient ±0.02%/°C typ. Overload Protection Short Circuit Protection Output Overvoltage Protection 120% typ. 350mA Version 700mA Version Continuous Current Limit 36V Zener Diode Clamp 15V Zener Diode Clamp continued on next page 18 RACD12 12 Watts max. Input Frequency Range Output Current Accuracy UL-8750 Certified 90VAC-264VAC Rated Power E340696 REV: 2/2010 Please Read Application Notes www.recom-electronic.com LIGHTLINE RACD12 AC/DC-Converter Specifications cont. (typical at 25°C and after warm up time unless otherwise specified ) Overtemperature Protection Operating Temperature Range (free air convection) Weight Shutdown, Automatic restart after cooling down Ambient Temperature -20°C to +50°C Case Temperature 85°C max. 100g Packing Quantity 1pc Storage Temperature Range -40°C to +100°C Humidity 95% RH max. IPRating IP20 PCB Material Case Material Designed to meet Standards THD Certifications Design Lifetime Connections Plastic Resin with Fibreglass (UL94V-0) Plastic EN 61347-1 EN 61347-2-13 EN55015 EN 61000-3-2 EN 61000-3-3 EN 61547 UL1310 <20% UL8750 Lamp Control Gear, General Safety Lamp Control Gear for LED Modules Electrical Lighting, EMC Emissions Limits for Harmonics Emissions EMC Compatibilty: Flicker and Voltage Variations Electrical Lighting: EMC Immunity Class II Power Supply Safety LED Lighting Safety 25°C ambient AC Input LED Output LED Output >70 x 10³ hours in operation Screw terminal Screw Terminal 5.5mm Socket with 2mm Pin (Suitable matching plug Switchcraft S760 or similar) Package Style and Pinning RACD12 3rd angle projection 123 5.5mm socket 45 39 3.5mm dia. Cable entry with strain relief 117 Connections CN1 18 15 2 Mounting screws are included Function L VAC in (L) N VAC in (N) CN2 Function + LED+ - LED- 5.5mm Socket Function www.recom-international.com REV:2/2010 Pin LED+ Shell LED- 19