STL100NH3LL N-channel 30V - 0.0032Ω - 25A - PowerFLAT™ (6x5) STripFET™ III Power MOSFET General features Type VDSS RDS(on) ID STL100NH3LL 30V <0.0035Ω 25A (1) 1. The value is rated according Rthj-pcb ■ Improved die-to-footprint ratio ■ Very low profile package (1mm max) ■ Very low thermal resistance ■ Conduction losses reduced ■ Switching losses reduced PowerFLAT™( 6x5 ) Description This series utilizes the last advanced design rules of ST’s proprietary STripFET™ technology. This process complete to unique metallization technique realised the most advanced low voltage Power MOSFET in PowerFLAT™(6x5). The Chipscaled PowerFLAT™ package allows a significant board space saving, still boosting the performance. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STL100NH3LL L100NH3LL PowerFLAT™ (6x5) Tape & reel January 2007 Rev 9 1/12 www.st.com 12 Contents STL100NH3LL Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 ................................................ 8 STL100NH3LL 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol VDS Parameter Drain-source voltage (VGS = 0) Value Unit 30 V VGS(1) Gate-source voltage ± 16 V VGS(2) Gate-source voltage ± 18 V ID(3) Drain current (continuous) at TC = 25°C 100 A ID (3) Drain current (continuous) at TC = 100°C 71 A ID (5) Drain current (continuous) at TC=100°C 15.6 A (4) Drain current (pulsed) 100 A IDM ID(5) Drain current (continuous) at TC = 25°C 25 A PTOT (3) Total dissipation at TC = 25°C 80 W PTOT (5) Total dissipation at TC = 25°C 4 W 0.03 W/°C -55 to 150 °C Derating factor TJ Operating junction temperature Storage temperature Tstg 1. Continuous mode 2. Guaranteed for test time < 15ms 3. The value is rated according Rthj-c 4. Pulse width limited by safe operating area 5. The value is rated according Rthj-pcb Table 2. Thermal resistance Symbol Parameter Value Unit Rthj-case Thermal resistance junction-case (Drain) (steady state) 1.56 °C/W Thermal resistance junction-ambient 31.3 °C/W Value Unit Rthj-pcb (1) 1. When mounted on FR-4 board of 1inch², 2oz Cu, t < 10sec Table 3. Symbol Avalanche data Parameter IAV Not-repetitive avalanche current, (pulse width limited by Tj Max) 12.5 A EAS Single pulse avalanche energy (starting Tj=25°C, Id=Iav, Vdd=24V) 1.3 J 3/12 Electrical characteristics 2 STL100NH3LL Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 250µA, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±16V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 12.5A Symbol gfs (1) Ciss Coss Crss Qg 30 1 10 µA µA ±100 nA 1 V 0.0032 0.0035 0.004 0.005 VGS= 4.5V, ID= 12.5A Unit V VDS = Max rating @125°C Parameter Test conditions Forward transconductance VDS =10V, ID = 12.5A Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 Qgd RG Gate input resistance Min. VDD=15V, ID = 25A VGS =4.5V (see Figure 7) f=1 MHz Gate DC Bias = 0 Test signal level = 20mV open drain 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 4/12 Max. Ω Ω Dynamic Total gate charge Gate-source charge Gate-drain charge Qgs Typ. VDS = Max rating, IDSS Table 5. Min. 1 Typ. Max. Unit 30 S 4450 655 50 pF pF pF 30 12.5 10 40 nC nC nC 2 3 Ω STL100NH3LL Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Table 7. Symbol Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. Typ. Max. 18 50 75 8 VDD=15V, ID= 12.5A, RG=4.7Ω, VGS=10V (see Figure 13) Unit ns ns ns ns Source drain diode Max Unit Source-drain current 25 A ISDM(1) Source-drain current (pulsed) 100 A VSD(2) Forward on voltage ISD=25A, VGS=0 1.3 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD=25A, ISD trr Qrr IRRM Parameter Test conditions di/dt = 100A/µs, VDD=25V, Tj=150°C Min Typ. 32 34 2.1 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/12 Electrical characteristics STL100NH3LL 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/12 STL100NH3LL Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized BVDSS vs temperature 7/12 Test circuit 3 STL100NH3LL Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/12 Figure 18. Switching time waveform STL100NH3LL 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/12 Package mechanical data STL100NH3LL PowerFLAT™ (6x5) MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. 0.80 0.83 0.93 0.031 0.032 0.036 A1 0.02 0.05 0.0007 0.0019 A3 0.20 A b 0.35 0.47 0.013 0.015 D 5.00 0.196 D1 4.75 0.187 D2 4.15 E 4.20 4.25 5.75 3.48 3.53 E4 2.58 2.63 2.68 0.135 1.27 0.70 0.80 0.167 0.226 3.43 e 0.165 0.018 0.236 E2 L 0.163 6.00 E1 10/12 0.40 0.007 0.137 0.139 0.103 0.105 0.050 0.90 0.027 0.031 0.035 STL100NH3LL 5 Revision history Revision history Table 8. Revision history Date Revision Changes 18-Apr-2005 1 First Release 20-Jun-2005 2 Updated mechanical data 22-Jun-2005 3 New Rg value on Table 6 10-Oct-2005 4 Inserted ecopack indication 09-Jan-2006 5 New footprint 08-Mar-2006 6 New template 29-Jun-2006 7 Modified curves, see Figure 1 and Figure 2 04-Sep-2006 8 The document has been reformatted, no content change 04-Jan-2007 9 New updated on Table 1 11/12 STL100NH3LL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12