TOSHIBA TLP627A

TLP627A,TLP627A-2,TLP627A-4
TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR
TLP627A,TLP627A-2,TLP627A-4
TELECOMMUNICATION
PROGRAMMABLE CONTROLLERS
DC-OUTPUT MODULE
単位: mm
The TOSHIBA TLP627A, -2, and -4 consist of a gallium arsenide
infrared emitting diode optically coupled to a darlington connected
phototransistor which has a 350V high voltage of collector-emitter
breakdown voltage.
The TLP627A-2 offer two isolated channels in a eight lead plastic DIP
package, while the TLP627A-4 provide four isolated channels per
package.
z Collector-Emitter Voltage
: 350V(MIN)
z Current Transfer Ratio
: 1500% (MIN)
z Isolation Voltage
: 5000Vrms(MIN)
TOSHIBA
Weight : 0.26 g
11−5B2
TOSHIBA
Weight : 0.54 g
11−10C4
TOSHIBA
Weight : 1.1 g
11−20A3
Pin Configuration (top view)
TLP627A
TLP627A-2
TLP627A-4
1 : ANODE
2 : CATHODE
3 : EMITTER
4 : COLLECTOR
1, 3 : ANODE
2, 4 : CATHODE
5, 7 : EMITTER
6, 8 : COLLECTOR
1, 3, 5, 7
: ANODE
2, 4, 6, 8
: CATHODE
9, 11, 13, 15 : EMITTER
10, 12, 14, 16 : COLLECTOR
1
2007-10-01
TLP627A,TLP627A-2,TLP627A-4
Absolute Maximum Ratings (Ta = 25°C)
CHARACTERISTICS
DETECTOR
LED
Forward Current
Forward Current Derating
SYMBOL
TLP627A
RATING
TLP627A−2
TLP627A−4
UNIT
IF
60
50
mA
ΔIF /℃
−0.7 (Ta≧39℃)
−0.5 (Ta≧25℃)
mA /℃
Pulse Forward Current
IFP
1 (100μs Pulse、100 pps)
A
Reverse Voltage
VR
5
V
Collector-Emitter Voltage
VCEO
350
V
Emitter-Collector Voltage
VECO
0.3
V
Collector Current
IC
150
mA
Collector Power Dissipation (1 circuit)
PC
150
(300)
(* )
Collector Power Dissipation Derating
(Ta≧25℃, 1 Circuit)
ΔPC /℃
−1.5
(−3.5)
(* )
Storage Temperature Range
Tstg
Operating Temperature Range
Lead Soldering Temperature
mW
−1.0
mA /℃
−55~125
℃
Topr
−55~100
℃
Tsol
260 (10 sec)
℃
Total Package Power Dissipation (1 circuit)
PT
250
(320)
Total Package Power Dissipation Derating
(Ta≧25℃, 1 circuit)
ΔPT /℃
−2.5
(−3.2)
Isolation Voltage
100
BVS
(* )
(* )
150
mW
−1.5
mW /℃
5000
(AC、1 min、R.H.≦60%) (** )
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
*
: IF = 20 mA max
** : Device considered a two terminal device : LED side pins shorted together and
DETECTOR side pins shorted together.
Recommended Operating Conditions
CHARACTERISTICS
SYMBOL
MIN.
TYP.
MAX.
UNIT
VCC
―
―
200
V
Forward Current
IF
―
16
25
mA
Collector Current
IC
―
―
120
mA
Topr
−25
―
85
℃
Supply Voltage
Operating Temperature
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25°C)
LED
CHARACTERISTICS
TEST CONDITION
MIN.
TYP.
MAX.
UNIT
Forward Voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse Current
IR
VR = 5 V
―
―
10
μA
CT
V = 0, f = 1 MHz
Capacitance
DETECTOR
SYMBOL
―
30
―
pF
Collector-Emitter Breakdown Voltage
V (BR) CEO
IC = 0.1 mA
350
―
―
V
Emitter-Collector Breakdown Voltage
V (BR) ECO
IE = 0.1 mA
0.3
―
―
V
VCE = 300 V
―
10
200
nA
VCE = 300 V, Ta = 85℃
―
―
20
μA
V = 0, f = 1 MHz
―
10
―
pF
Collector Dark Current
ICEO
Capacitance Collector to Emitter
CCE
2
2007-10-01
TLP627A,TLP627A-2,TLP627A-4
Coupled Electrical Characteristics (Ta = 25°C)
CHARACTERISTICS
SYMBOL
Current Transfer Ratio
Saturated CTR
Collector-Emitter Saturation Voltage
TEST CONDITION
MIN.
TYP.
MAX.
UNIT
IC / IF
IF = 1 mA, VCE = 1 V
1500
4000
―
%
IC / IF (sat)
IF = 10 mA, VCE = 1 V
500
―
―
%
IC = 15 mA, IF = 1 mA
―
―
1.0
IC = 100 mA, IF = 10 mA
0.3
―
1.2
MIN.
TYP.
MAX.
UNIT
―
0.8
―
pF
―
Ω
VCE (sat)
V
Isolation Characteristics (Ta = 25°C)
CHARACTERISTICS
SYMBOL
Capacitance Input to Output
CS
Isolation Resistance
RS
TEST CONDITION
VS = 0, f = 1 MHz
VS = 500 V, R.H.≦60%
5×10
AC、1 minite
Isolation Voltage
BVS
12
10
14
5000
―
―
AC、1 second、in oil
―
10000
―
DC、1 second、in oil
―
10000
―
Vdc
MIN.
TYP.
MAX.
UNIT
―
40
―
―
15
―
―
50
―
―
15
―
―
5
―
―
40
―
―
80
―
Vrms
Switching Characteristics (Ta = 25°C)
CHARACTERISTICS
SYMBOL
Rise Time
tr
Fall Time
tf
Turn-on Time
ton
Turn-off Time
toff
Turn-on Time
tON
Strage Time
ts
Turn-off Time
tOFF
TEST CONDITION
VCC = 10 V
IC = 10 mA
RL = 100Ω
RL = 180Ω
VCC = 10 V, IF = 16 mA
(Fig.1)
μs
μs
Fig.1: SWITCHING TIME TEST CIRCUIT
3
2007-10-01
TLP627A,TLP627A-2,TLP627A-4
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4
2007-10-01