Tfs1842A.doc version 1.4 VI TELEFILTER Development specification 30.10.2003 TFS 1842A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedances for input: for output: 23 C 13 dBm 50 50 (unbalanced) // 1pF (balanced) Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1842,5 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (Reference level) within PB - Nominal frequency fN - Centre frequency fC Pass band PB 1842,5 Pass-band ripple within PB Absolute attenuation 0,0 1160,0 1430,0 1705,0 1920,0 1980,0 2100,0 MHz MHz MHz MHz MHz MHz MHz ... ... ... ... ... ... ... tolerance/limit max. 4,3 1842,5 MHz dB MHz - - fN - max 37,5 2,3 MHz dB aabs 1160,0 1430,0 1705,0 1785,0 1980,0 2100,0 6000,0 MHz MHz MHz MHz MHz MHz MHz - dB dB dB dB dB dB dB - 40 °C ... + 85 °C Storage temperature range Input power level 37 30 20 9 9 20 20 - 10 °C ... + 75 °C Operating temperature range Temperature coefficient of frequency min min min min min min min TCf t.b.d. max 5 dBm Generated: Checked / approved: Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs1842A.doc version 1.4 VI TELEFILTER Development specification TFS 1842A 30.10.2003 2/5 Construction, pin configuration and 50 Ohm matching network (All dimensions in mm) 5 6 4 L42 A Date code: Year+week R44 0,1 1 0,6 50 6 N P R 3 2 1 2001 2002 2003 ... Pin Pin Pin Pin Pin Pin 3 1 2 3 4 5 6 Input Ground Input, unbalanced Input Ground Output, balanced Ground Output, balanced 4 0,6 matching network: 2 6 Input SAW 50 Ohm 1,3 CL Output 50 Ohm 4 5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs1842A.doc version 1.4 VI TELEFILTER Development specification 30.10.2003 TFS 1842A 3/5 Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4 Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer 9000 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE Tape (all dimensions in mm) W Po Do E F G (min) P2 P1 D1(min) : : : : : : : : : 8 4 1,5 1,75 3,5 ± 0,75 2 4 1,5 ± 0,3 ± 0,1 + 0,1 ± 0,1 0,05 Ao Bo CT : : : 3,25 3,25 5,5 ± 0,1 ± 0,1 ± 0,2 Do Po P2 E Ao F D1 CT W Bo ± 0,05 ± 0,1 G P1 COVER TAPE W2 Reel (all dimensions in mm): A W1 : 330 : 8,4 + 2,0 W2 (m ax) : 14,4 N (m in) : C : 50 13 A +0,5/ -0,2 C N W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right. Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs1842A.doc version 1.4 VI TELEFILTER Development specification 30.10.2003 TFS 1842A 4/5 Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods peak temperature over 200 °C 255 °C ± 5 °C 20 sec. - 25 sec. Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / s ec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs1842A.doc version 1.4 VI TELEFILTER Development specification 30.10.2003 TFS 1842A 5/5 History Version Reason of Change Name Date 1.0 generation of “Development specification” according to customer requirements Dr. Sabah 24.07.2003 1.1 add page 2 ... 5 of specification Konietzko 16.09.2003 1.2 change relative attenuation to absolute attenuation Roizengaft 17.10.2003 1.3 change of package layout Roizengaft 27.10.2003 1.4 definition of packing Roizengaft 30.10.2003 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.