VECTRON TFS280G

Filename: tfs280g.doc
version 1.6
VI TELEFILTER
Filter specification
16.10.2003
TFS 280 G
1/5
Measurement condition
Ambient temperature:
Input power level:
Source and load impedance:
Terminating impedances *
Input:
Output:
22
0
50
275
162
2
C
dBm
|| -7,7 pF
|| -10,6 pF
Characteristics
Remark:
The reference level for the relative attenuation a rel of TFS280G is the minimum of the pass band attenuation amin. This value is defined as the
insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level
relative to the insertion loss a e. The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies
given below, even if the centre frequency f c is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and
due to a production tolerance for the centre frequency fc.
Data
typ. value
Insertion loss
a e = amin
11,3
Nominal frequency
fN
-
Centre frequency
fc
280,0
Relative attenuation
a rel
fN -
20
MHz ... fN +
20
MHz
fN +
fN +
10
32
40
MHz ... fN 32
MHz ... fN +
40
MHz ... fN + 220
MHz
MHz
MHz
0,8
Group delay ripple GDR
fN – 17 MHz ... fN + 17 MHz
dB
limit
max.
12
dB
280,0 MHz
MHz
-
dB
max.
1
dB
41
38
41
dB
dB
dB
min.
min.
min.
40
37
40
dB
dB
dB
38
ns
max.
75
ns
Input power level
-
max. + 10
Operating temperature range
-
- 40 C ... + 85 C
Storage temperature range
-
- 40 C ... + 85 C
Temperature coefficient of frequency
TCf
-87
ppm/K
dBm
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
Generated:
Checked / approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs280g.doc
version 1.6
VI TELEFILTER
Filter specification
16.10.2003
TFS 280 G
2/5
Construction and pin connection
(All dimensions in mm)
+0.15
5.0 SQ -0.1
7
5
280 G
R16
1
3
Date code
1
2
3
4
5
6
7
8
50
Input RF return
Input
Ground
Ground
Output RF return
Output
Ground
Ground
Datecode
N
P
R
Year + week
2001
2002
2003
...
test circuit
L1
2
6
L2
Input
Output
50 Ohm
50 Ohm
C1
SAW
C2
1,3,4,5,7,8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs280g.doc
version 1.6
VI TELEFILTER
16.10.2003
Filter specification
TFS 280 G
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page
4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
Tape (all dimensions in mm)
:
12
Po
:
4
± 0,1
1,5
+ 0,1
Do
:
E
:
1,75 ± 0,1
F
:
5,5 ± 0,05
G (min) :
P2
:
2
± 0,05
P1
:
8
± 0,10
Po
P2
E
Ao
F
D1
W
Bo
G
P1
1,5
Ao
:
5,30
± 0,1
Bo
:
5,30
± 0,1
9,5
± 0,1
CT
Do
CT
0,75
D1(min) :
EMBOSSED CARRIER TAPE
± 0,3
W
3000
min 300 mm
min 500 mm
min 300 mm
:
COVER TAPE
W2
Reel (all dimensions in mm):
A
:
W1
:
W2 (max) :
330
12,4 ± 2,0
18,4
N (min)
:
50
C
:
13
± 0.2
A
C
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs280g.doc
version 1.6
VI TELEFILTER
16.10.2003
Filter specification
TFS 280 G
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs280g.doc
VI TELEFILTER
version 1.6
Filter specification
16.10.2003
TFS 280 G
5/5
History
Version
Reason of Changes
Name
Date
1.0
- new generation
Steiner
20.08.2002
1.1
- change temperature, add 3dB passband requirement
- relax stop-band limit lines according to larger temperature range
Steiner
28.10.2002
1.2
- source and load impedance added
- passband magnitude extended to +/-20MHz
- Tk added
Steiner
07.01.2003
1.3
- label changed to standard label
Steiner
18.03.2003
1.4
- change pinning corresponding to customer demands
- added operating temperature range to guaranty for samples delivered
with date code R16
Chilla
23.04.2003
1.5
- added limit line at 37 dB
Chilla
10.07.2003
1.6
- changed development specification to filter specification
- added typical values
- operating temperature range changed to –40 °C ... +80 °C
- added terminating impedances
Chilla
16.10.2003
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.