SPU16A SERIES 15W Desk Top Switching Power Supplies For I.T.E. Description: The SPU16A series of AC/DC switching mode power supplies provide 15 Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All model meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/cUL(UL 60950-1:2ndEdition), TUV/GS(EN 60950-1:2ndEdition) and new CE requirements. All units are 100% burned-in and tested. Features: Wide Operating Voltage 90 to 264VAC,47 to 63 Hz IEC-320-C14 Input Inlet Optional Output Connector (See appendix) Single Output Energy Star 2.0, Efficiency level V Class I 2 year warranty Safety Approvals: CB RT Electrical Characteristics: Sym. Vin fin Agree to apply for the PSE if order on hand Min. Typ. Max. Unit 100 240 VAC Operate Voltage Range 90 264 VAC Input Frequency 47 63 Hz 15 W Parameter Test Conditions Safety Approvals Input Voltage Range Po Output Power Range Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Vin=90 to 264VAC Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.4 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.26 A Irl Low Line Inrush Current 12 15 A Irh High Line Inrush Current 26 30 A Eff Efficiency Io=Full load, 25°c, Cool start, Vin=115VAC Io=Full load, 25°c, Cool start, Vin=230VAC Io=Full Load, Vin=230VAC REG-i Line Regulation Io=Full Load REG-o Load Regulation Vin=230VAC 85 % 0.5 1 % 3 10 % 72 OVP Over Voltage Protection OCP Over Current Protection Nil.But,Output protected to short circut conditions Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC Thold Hold-Up Time Ts * PS E S&E Start Up Time % Nil 4 Io=Full Load, Vin=110VAC 8 Io=Full Load, Vin=100VAC 0.3 % ms ms S 1 2 Vp-p Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA 0.04 % /°C 0.5 W TC Pno Temperature Coefficient All output No-Load Power Consumption No load, Vin=240VAC -0.04 0 0.4 % * Environmental : Note: The Ripple & Noise which is under 3.3VCD at 2% max Sym. Toper Tstg Ho Hr MTBF Pd Parameter T e s t Conditions Operating Temperature Storage Temperature Operating Humidity Storage Humidity Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Derate linearly from 100% load at 40 C to 50% load at 70 C Min. Typ. Max. Unit 40 C C % % Hrs 0 -40 0 0 0.1M 70 85 95 75 SPU16A SERIES 15W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Sym. Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to Ground Isolation Resistance Vps Vpg Ris CISPR EMI requirements for CISPR-22 EMI requirements for FCC PART-15 FCC Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC T e s t Conditions M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Single Output ) : * Output Current Total Regulation Maximum Outpu t Power 03 ~ 05 VDC 2.50 A max 7% 12W 05 ~ 06 VDC 2.50 ~ 2.00 A 5% 12W SPU16A-103 06 ~ 08 VDC 2.00 ~ 1.50 A 5% 12W SPU16A-104 08 ~ 11 VDC 1.87 ~ 1.36 A 5% 15W SPU16A-105 11 ~ 13 VDC 1.36 ~ 1.15 A 5% 15W SPU16A-106 13 ~ 16 VDC 1.15 ~ 0.94 A 5% 15W SPU16A-107 16 ~ 21 VDC 0.94 ~ 0.72 A 5% 15W SPU16A-108 21 ~ 27 VDC 0.72 ~ 0.55 A 5% 15W SPU16A-109 27 ~ 33 VDC 0.55 ~ 0.45 A 5% 15W SPU16A-110 33 ~ 40 VDC 0.45 ~ 0.37 A 3% 15W SPU16A-111 40 ~ 48 VDC 0.37 ~ 0.31 A 3% 15W Model Number Output Voltage SPU16A-101 SPU16A-102 Mark “ * ” means approved by PSE. SPU16A- 101 had been approved by CEC level IV. SPU16A- 102~111 had been approved by CEC level V. Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 165gs approx. 3. Optional output connector: See page Appendix.