SPU130 SERIES 130W Desk Top Switching Power Supplies For I.T.E. Description: The SPU130 series of AC/DC switching mode power supplies provide 130 Watts of continuous output power. All supplies are UL 94V-0 compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC class B and CISPR class B emission Limits and are designed to comply with UL, C-UL and CE requirements. All units are 100% burned in and tested. Features: + Wide Input Voltage 90 to 264 VAC,47 to 63 Hz + IEC-320-C14 Input Inlet + Output Voltage Available From 3 VDC Thru 55 VDC + Optional Output Connectors (See appendix) + Single and Dual Output + Input Surge Current, Over Voltage and Over Load protection Safety Approvals : + One year warranty CB Electrical Characteristics: Sym. Parameter Vin Input Voltage Fin Input Frequency Wo Output Power Range Vo Output Voltage Range Test Conditions Min. Typ. Max. 90 Vin=90 to 264VAC Unit 264 VAC 47 63 Hz 0 130 W See rating chart V See rating chart A Io Output Current Range Iil Input Current (Low Line) Io=Full load, Vin=11 5VAC 3.2 A Iih Input Current (High Li ne) Io=Full load, Vin=23 0 VAC 1.7 A Irl Low Line Inrush Current 15 30 A Irh High Line Inrush Current 30 60 A Eff Efficiency Io=Full load, 25°c ,Cool start, Vin=115VAC Io=Full load, 25°c, Cool start, Vin=230VAC Io=Full Load, Vin=23 0VAC REG-i Line Regulation Io=Full Load 0.5 REG-o Load Regulation Vin=230VAC OVP Over Voltage Protection OCP Over Current Protection Ttr Transient Response 80 3 % 5 % 112 132 % 110 150 % 4 mS Io=Full Load to Half Load, Vin=100VAC Thold Hold-Up Time % 1 Io=Full Load, Vin=10 0VAC 16 Ts Start Up Time Io=Full Load, Vin=10 0VAC 0.3 Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC Ilk Safety Ground Leakage Current Io=Full Load, Vin=24 0VAC Tc Temperature Coefficient All output PFC Power Factor Correction Optional mS 1 2 S 0.5 1 % 0.5 0.75 mA -0.04 0.04 %/°c 0.3 0.99 Environmental : Sym. Parameter Toper Operating Temperature Tstg Storage Temperature Test Conditions Hr Relative Humidity Pd Derated From 100% at +50°c Linearly to 50% at 70 °c Min. Typ. Max. Unit 0 70 °c -40 85 °c 5 95 % SPU130 SERIES 130W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Sym. Parameter Test Conditions Dielectric Withstanding Voltage Vps for Primary to secondary Dielectric Withstanding Vpg Voltagefor Primary to ground Isolation Resistance Ri CISPR EMI requirements for CISPR-22 EMI requirements for FCC FCC PART-15 Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC Test Voltage = 500VDC Vin=220VAC 50 B MW CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage SPU130-101 SPU130-102 SPU130-103 SPU130-104 SPU130-105 SPU130-106 SPU130-107 SPU130-108 SPU130-109 SPU130-110 SPU130-111 SPU130-112 03 05 06 08 11 13 16 21 27 33 40 50 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 05 06 08 11 13 16 21 27 33 40 50 55 VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Output Current 30.00 23.00 21.60 16.25 11.80 10.00 08.12 06.19 04.81 03.93 03.25 03.25 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 18.00 19.16 16.25 11.80 10.00 08.12 06.19 04.81 03.93 03.25 02.60 02.36 A A A A A A A A A A A A Total Regulation Maximum Output Power 7% 7% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 90W 115W 130W 130W 130W 130W 130W 130W 130W 130W 130W 130W Output Voltage And Current Rating Chart ( Multi Output ) : Model Number Output #1 Output #2 Output #3 Maximum Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Output Power SPU130-200 +3.3V 0.5A 20A 5% +12V 0.2A 2.0A 5% 90W SPU130-201 +5V 0.5A 20A 5% +12V 0.2A 2.0A 5% 120W SPU130-202 +5V 0.5A 20A 5% +15V 0.2A 2.0A 6% 120W SPU130-203 +5V 0.5A 20A 5% +24V 0.1A 2.0A 5% 120W Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 860gs approx. 3. Optional output connectors: See page Appendix.