MCH3914 Ordering number : ENA1511A SANYO Semiconductors DATA SHEET N-Channel Junction Silicon FET MCH3914 High-Frequency Amplifier, Analog Switch Applications Features • • • • • | yfs | is large Ciss is small Small package FBET process Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Gate-to-Drain Voltage VDSX VGDS Gate Current IG Drain Current ID Allowable Power Dissipation Junction Temperature PD Tj Storage Temperature Tstg Conditions Ratings --15 5 mA mW 150 °C --55 to +150 °C Product & Package Information • Package : MCPH3 • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel 0.25 MCH3914-7-TL-H MCH3914-8-TL-H Packing Type : TL 1.6 0 to 0.02 J R A N K LOT No. TL 0.25 1 0.65 2 0.3 Electrical Connection 0.07 0.85 2.1 Marking LOT No. 3 V mA 50 unit : mm (typ) 7019A-006 0.15 V 300 When mounted on ceramic substrate (600mm2×0.8mm) Package Dimensions 2.0 Unit 15 2 1 : Source 2 : Drain 3 : Gate 3 SANYO : MCPH3 1 http://www.sanyosemi.com/en/network/ 80812 TKIM/72209AC TKIM TC-00002014 No. A1511-1/6 MCH3914 Electrical Characteristics at Ta=25°C Parameter Symbol Gate-to-Drain Breakdown Voltage V(BR)GDS IGSS VGS(off) Gate-to-Source Leakage Current Cutoff Voltage Zero-Gate Voltage Drain Current IDSS | yfs |1 Forward Transfer Admittance Ciss Reverse Transfer Capacitance Crss min IG=--10μA, VDS=0V VGS=--10V, VDS=0V typ Unit max --15 V --1.0 VDS=5V, ID=10μA --0.6 VDS=5V, VGS=0V 16.0* VDS=5V, ID=10mA, f=1kHz VDS=5V, VGS=0V, f=1kHz | yfs |2 Input Capacitance Ratings Conditions --1.4 nA --3.0 V 50.0* mA 14 21 mS 14 29 mS 4.9 pF 1.4 pF VDS=5V, VGS=0V, f=1MHz * : The MCH3914 is classified by IDSS as follows : (unit : mA) Rank 7 8 IDSS 16.0 to 32.0 25.0 to 50.0 Ordering Information Package Shipping MCH3914-7-TL-H Device MCPH3 3,000pcs./reel MCH3914-8-TL-H MCPH3 3,000pcs./reel ID -- VDS 24 60 VDS=0V Pb Free and Halogen Free ID -- VGS VDS=5V 50 12 --0.4V 8 --0.6V --0.8V 4 40 A 30 m A --0.2V 16 0 =5 SS 32 m Drain Current, ID -- mA 20 Drain Current, ID -- mA memo A m 25 A m 20 ID 20 10 mA 16 --1.0V 0 0 4 8 12 16 Drain-to-Source Voltage, VDS -- V 20 ITR02811 0 --2.8 --2.4 --2.0 --1.6 --1.2 --0.8 --0.4 Gate-to-Source Voltage, VGS -- V 0 IT14783 No. A1511-2/6 MCH3914 ID -- VGS VDS=5V IDSS=25mA 30 Ta =-2 5° C 20 --1.6 --1.2 --0.8 --0.4 Gate-to-Source Voltage, VGS -- V VGS(off) -- IDSS 5 7 2 5 3 Drain Current, IDSS -- mA 2 1.0 7 2 3 5 7 3 5 7 100 IT14784 Ciss -- VDS VGS=0V f=1MHz 2 7 2 10 2 Drain-to-Source Voltage, VDS -- V ITR02816 1.0 10 2 Drain-to-Source Voltage, VDS -- V ITR02817 3 5 7 PD -- Ta 350 VGS=0V f=1MHz 1.0 2 10 3 100 IT14785 3 5 7 7 5 1.0 7 Crss -- VDS 5 5 7 --1.0 10 =0V) (VGS | yfs | (I =1 D 0mA) 2 10 2 7 | yfs | 3 Drain Current, IDSS -- mA VDS=5V ID=10μA 5 5 ITR02813 3 5 VDS=5V f=1kHz 7 10 0 Input Capacitance, Ciss -- pF Cutoff Voltage, VGS(off) -- V °C °C 75 10 Reverse Transfer Capacitance, Crss -- pF 25 Allowable Power Dissipation, PD -- mW Drain Current, ID -- mA 40 0 --2.0 | yfs | -- IDSS 100 Forward Transfer Admittance, | yfs | -- mS 50 When mounted on ceramic substrate (600mm2×0.8mm) 300 250 200 150 100 50 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT14786 No. A1511-3/6 MCH3914 Taping Specification MCH3914-7-TL-H, MCH3914-8-TL-H No. A1511-4/6 MCH3914 Outline Drawing MCH3914-7-TL-H, MCH3914-8-TL-H Land Pattern Example Mass (g) Unit 0.007 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No. A1511-5/6 MCH3914 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No. A1511-6/6