CPH3910 Ordering number : ENA1965 SANYO Semiconductors DATA SHEET N-Channel Junctin Silicon FET CPH3910 High-Frequency Low-Noise Amplifier Applications Applications • • For AM tuner RF amplification Low noise amplifier Features • • • • VGDS: --25V max. | yfs |: 40mS typ. Ciss: 6.0pF typ. NF: 2.1dB typ. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Gate-to-Drain Voltage VDSX VGDS Gate Current Drain Current Allowable Power Dissipation Conditions Ratings Unit 25 V IG 10 mA ID PD 50 mA 400 mW 150 °C --55 to +150 °C Junction Temperature Tj Storage Temperature Tstg Package Dimensions Product & Package Information unit : mm (typ) 7015A-007 • Package : CPH3 • JEITA, JEDEC : SC-59, TO-236, SOT-23 • Minimum Packing Quantity : 3,000 pcs./reel 0.6 2.9 V --25 0.15 Packing Type: TL Marking J2 0.6 0.2 0.9 1 2 0.95 0.4 1 : Source 2 : Drain 3 : Gate LOT No. 0.05 1.6 2.8 0.2 3 TL Electrical Connection SANYO : CPH3 3 1 2 http://semicon.sanyo.com/en/network 21512AC TKIM TC-00002694 No. A1965-1/4 CPH3910 Electrical Characteristics at Ta=25°C Parameter Symbol Gate-to-Drain Breakdown Voltage V(BR)GDS IGSS VGS(off) Gate Cutoff Current Cutoff Voltage Drain Current Ratings Conditions min typ IG=--10μA, VDS=0V VGS=--10V, VDS=0V --25 VDS=5V, ID=100μA --0.6 Unit max V --1.0 --1.2 nA --1.8 V VDS=5V, VGS=0V 20 Forward Transfer Admittance IDSS | yfs | VDS=5V, VGS=0V, f=1kHz 30 40 mS Input Capacitance Ciss VDS=5V, VGS=0V, f=1MHz 6.0 pF Reverse Transfer Capacitance Crss VDS=5V, VGS=0V, f=1MHz 2.3 Noise Figure NF VDS=5V, VGS=0V, f=100MHz 2.1 ID -- VDS 30 --0.2V 15 --0.4V 10 --0.6V 0.5 1.0 1.5 --0.4V 15 --0.6V 10 --1.0V 2 4 6 8 10 Drain-to-Source Voltage, VDS -- V 50 VDS=5V 45 IT16688 ID -- VGS VDS=5V 20 20 mA 25 30 mA 15 20 5 5 --1.0 --0.5 0 Gate-to-Source Voltage, VGS -- V | yfs | -- ID Forward Transfer Admittance, | yfs | -- mS 2 10 7 5 3 2 3 5 7 10 --1.0 2 Drain Current, ID -- mA 3 5 7 100 IT16691 --0.5 0 0.5 IT16690 | yfs | -- IDSS 100 3 2 --1.5 Gate-to-Source Voltage, VGS -- V IT16689 VDS=5V f=1kHz IDSS=30mA 1.0 1.0 0 --2.0 0.5 °C 15 10 --1.5 --25 °C 25 10 0 --2.0 Ta= 30 25 S =4 0m A 30 35 °C 35 75 Drain Current, ID -- mA 40 ID S Drain Current, ID -- mA 20 0 40 5 --0.2V 25 IT16687 ID -- VGS 50 Forward Transfer Admittance, | yfs | -- mS 30 0 2.0 Drain-to-Source Voltage, VDS -- V 7 VGS=0V 5 --0.8V --1.0V 0 0 100 dB --0.8V 5 45 Drain Current, ID -- mA Drain Current, ID -- mA 20 pF 2.8 35 V V GS=0 mA ID -- VDS 40 25 40 VDS=5V VGS=0V f=1kHz 7 5 3 2 10 10 2 3 5 Drain Current, IDSS -- mA 7 100 IT16692 No. A1965-2/4 CPH3910 VGS(off) -- IDSS 10 3 2 1.0 7 5 3 5 3 2 2 0.1 2 10 3 5 7 Drain Current, IDSS -- mA 5 3 2 2 3 5 7 10 2 2 3 3 Drain-to-Source Voltage, VDS -- V 5 7 100 IT16695 5 7 2 10 3 5 Drain-to-Source Voltage, VDS -- V PD -- Ta 450 VGS=0V f=1MHz 7 1.0 1.0 1.0 1.0 100 IT16693 Crss -- VDS 10 Reverse Transfer Capacitance, Crss -- pF VGS=0V f=1MHz 7 Input Capacitance, Ciss -- pF 5 Allowable Power Dissipation, PD -- mW Cutoff Voltage, VGS(off) -- V 7 Ciss -- VDS 10 VDS=5V ID=100μA 7 100 IT16694 400 350 300 250 200 150 100 50 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT16696 No. A1965-3/4 CPH3910 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of February, 2012. Specifications and information herein are subject to change without notice. PS No. A1965-4/4