< IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE Collector current I C .............….......................… 75A Collector-emitter voltage V CES ......................… 1 7 0 0 V Maximum junction temperature T j m a x .............. 1 5 0 °C ●Flat base Type ●Copper base plate ●RoHS Directive compliant ●UL Recognized under UL1557, File E323585 Dual (Half-Bridge) APPLICATION AC Motor Control, Motion/Servo Control, Power supply, etc. OUTLINE DRAWING & INTERNAL CONNECTION Dimension in mm INTERNAL CONNECTION Tolerance 0.5 to 3 ±0.2 over 3 to 6 ±0.3 over 6 to 30 ±0.5 over 30 to 120 ±0.8 over 120 to 400 ±1.2 Di1 C2E1 Tr2 E2 Di2 Publication Date : June.2011 1 Tr1 C1 G1 E1 (Es1) Division of Dimension E2 G2 (Es2) Tolerance otherwise specified < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE ABSOLUTE MAXIMUM RATINGS (Tj=25 °C, unless otherwise specified) Rating Unit VCES Symbol Collector-emitter voltage G-E short-circuited 1700 V VGES Gate-emitter voltage C-E short-circuited ±20 V IC Item Conditions Collector current ICRM Ptot IE IERM (Note.1) Emitter current TC=25 °C (Note.2, 4) TC=25 °C (Note.2, 4) Pulse, Repetitive 75 (Note.3) Pulse, Repetitive Total power dissipation (Note.1) (Note.2, 4) DC, TC=111 °C A 150 780 W 75 (Note.3) A 150 Tj Junction temperature - -40 ~ +150 Tstg Storage temperature - -40 ~ +125 Visol Isolation voltage Terminals to base plate, RMS, f=60 Hz, AC 1 min 3500 °C V ELECTRICAL CHARACTERISTICS (T j =25 °C, unless otherwise specified) Symbol Item Limits Conditions Min. Typ. Max. Unit ICES Collector-emitter cut-off current VCE=VCES, G-E short-circuited - - 1.0 mA IGES Gate-emitter leakage current VGE=VGES, C-E short-circuited - - 2.0 μA VGE(th) Gate-emitter threshold voltage IC=7.5 mA, VCE=10 V V VCEsat Collector-emitter saturation voltage Cies Input capacitance Coes Output capacitance Cres Reverse transfer capacitance QG Gate charge td(on) Turn-on delay time tr Rise time td(off) Turn-off delay time tf Fall time IC=75 A (Note.5) 5.5 7.0 8.5 T j =25 °C - 2.2 2.8 T j =125 °C - 2.45 - , VGE=15 V - - 18.5 VCE=10 V, G-E short-circuited - - 2.1 - - 0.4 VCC=1000 V, IC=75 A, VGE=15 V - 500 - - - 200 VCC=1000 V, IC=75 A, VGE=±15 V, RG=6.4 Ω, Inductive load - - 150 - - 550 - - 350 V nF nC ns VEC (Note.1) Emitter-collector voltage IE=75 A - 2.3 3.0 V trr (Note.1) Reverse recovery time VCC=1000 V, IE=75 A, VGE=±15 V, - - 300 ns Qrr (Note.1) μC (Note.5) , G-E short-circuited Reverse recovery charge RG=6.4 Ω, Inductive load - 7.5 - Eon Turn-on switching energy per pulse VCC=1000 V, IC=IE=75 A, - 15.9 - Eoff Turn-off switching energy per pulse VGE=±15 V, RG=6.4 Ω, T j =125 °C, - 22.5 - Reverse recovery energy per pulse Inductive load - 24.8 - mJ Internal gate resistance Per switch, T c =25 °C - 0 - Ω Err (Note.1) rg mJ THERMAL RESISTANCE CHARACTERISTICS Symbol Rth(j-c)Q Rth(j-c)D Rth(c-s) Item Thermal resistance (Note.2) Contact thermal resistance Limits Conditions (Note.2) Min. Typ. Max. Unit Junction to case, per IGBT - - 0.16 K/W Junction to case, per FWDi - - 0.29 K/W - 0.022 - K/kW Case to heat sink, per 1/2 module, Thermal grease applied (Note.6) MECHANICAL CHARACTERISTICS Symbol Mt Ms m ec Item Mounting torque Weight Flatness of base plate Limits Conditions Min. Typ. Max. Unit Main terminals M 5 screw 2.5 3.0 3.5 N·m Mounting to heat sink M 6 screw 3.5 4.0 4.5 N·m - 310 - g -100 - +100 μm On the centerline X, Y Publication Date : June.2011 2 (Note.7) < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE -: Concave +: Convex Note1. Represent ratings and characteristics of the anti-parallel, emitter-collector free wheeling diode (FWDi). 2. Case temperature (TC) and heat sink temperature (T s ) are defined on the each surface (mounting side) of base plate and heat sink just under the chips. Refer to the figure of chip location. The heat sink thermal resistance should measure just under the chips. 3. Pulse width and repetition rate should be such that the device junction temperature (T j ) dose not exceed T j m a x rating. 4. Junction temperature (T j ) should not increase beyond T j m a x rating. 5. Pulse width and repetition rate should be such as to cause negligible temperature rise. Refer to the figure of test circuit. 6. Typical value is measured by using thermally conductive grease of λ=0.9 W/(m·K). 7. Base plate (mounting side) flatness measurement points (X, Y) are as follows of the following figure. 3 mm X 3 mm Y Mounting side 3 mm Mounting side -: Concave Mounting side +: Convex RECOMMENDED OPERATING CONDITIONS Symbol Item Conditions Limits Min. Typ. Max. Unit VCC (DC) Supply voltage Applied across C1-E2 - 1000 1100 VGEon Gate (-emitter drive) voltage Applied across G1-Es1/G2-Es2 13.5 15.0 16.5 V RG External gate resistance Per switch 6.4 - 64 Ω CHIP LOCATION (Top view) V Dimension in mm, tolerance: ±1 mm Tr1/Tr2: IGBT, Di1/Di2: FWDi Publication Date : June.2011 3 < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE TEST CIRCUIT AND WAVEFORMS C1 VGE=15 V IC G1 V Es1 VGE =15 V Tr1 Shortcircuited IE E2 Es2 E2 Di1 Di2 V C E s a t test circuit VEC test circuit ～ vGE iE 90 % Q rr =0.5×I rr ×t r r iE 0V 0 t Load t rr IE + VCC iC t 0A ～ -V GE C2E1 G2 Es2 Tr2 V Es1 G2 E2 Es2 E2 Es2 G1 C2E1 Shortcircuited IC G2 G2 IE Es1 V C2E1 C1 Shortcircuited G1 C2E1 Shortcircuited C1 Shortcircuited G1 Es1 V C1 Shortcircuited 90 % RG +V GE VGE 0V Irr VCE iC -V GE 0A tr t d (o n ) tf t d( o ff) t Switching characteristics test circuit and waveforms t r r , Q r r test waveform iE vCE iC iC ICM 0.5×I r r 10% VCC ICM VCC IEM vEC vCE t 0A 0 0.1×ICM 0.1×VCC t 0 0.1×VCC 0.02×ICM ti ti IGBT Turn-on switching energy IGBT Turn-off switching energy t VCC 0V t ti FWDi Reverse recovery energy Turn-on / Turn-off switching energy and Reverse recovery energy test waveforms (Integral time instruction drawing) Publication Date : June.2011 4 < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE PERFORMANCE CURVES COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) T j =25 °C 150 VGE=15 V VGE=20 V 4 13 V 12 V COLLECTOR-EMITTER SATURATION VOLTAGE VCEsat (V) COLLECTOR CURRENT IC (A) 15 V 100 11 V 50 10 V T j =125 °C 3 T j =25 °C 2 1 9V 8V 0 0 0 2 4 6 8 COLLECTOR-EMITTER VOLTAGE 10 0 50 VCE (V) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 150 IC (A) FREE WHEELING DIODE FORWARD CHARACTERISTICS (TYPICAL) T j =25 °C G-E short-circuited 1000 10 IC=150 A IC=75 A IE (A) T j =125 °C IC=30 A EMITTER CURRENT 8 COLLECTOR-EMITTER SATURATION VOLTAGE VCEsat (V) 100 COLLECTOR CURRENT 6 4 100 T j =25 °C 10 2 0 1 5 10 15 GATE-EMITTER VOLTAGE 0.5 20 VGE (V) 1 1.5 2 2.5 EMITTER-COLLECTOR VOLTAGE Publication Date : June.2011 5 3 VEC (V) 3.5 < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE PERFORMANCE CURVES HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) VCC=1000 V, VGE=±15 V, RG=6.4 Ω, T j =125 °C, INDUCTIVE LOAD HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) VCC=1000 V, IC=75 A, VGE=±15 V, T j =125 °C, INDUCTIVE LOAD 1000 1000 tf td(off) tf td(on) (ns) 100 tr SWITCHING TIME SWITCHING TIME (ns) td(off) 10 1 td(on) 100 tr 10 1 10 COLLECTOR CURRENT 100 1 IC (A) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) VCC=1000 V, VGE=±15 V, RG=6.4 Ω, T j =125 °C INDUCTIVE LOAD, PER PULSE 100 RG (Ω) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) VCC=1000 V, IC/IE=75 A, VGE=±15 V, T j =125 °C INDUCTIVE LOAD, PER PULSE 1000 SWITCHING ENERGY (mJ) REVERSE RECOVERY ENERGY (mJ) 100 SWITCHING ENERGY (mJ) REVERSE RECOVERY ENERGY (mJ) 10 EXTERNAL GATE RESISTANCE Err 10 Eon Eoff 100 Eon Eoff Err 1 10 1 10 100 1 10 EXTERNAL GATE RESISTANCE COLLECTOR CURRENT IC (A) EMITTER CURRENT IE (A) Publication Date : June.2011 6 100 RG (Ω) < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE PERFORMANCE CURVES FREE WHEELING DIODE REVERSE RECOVERY CHARACTERISTICS (TYPICAL) VCC=1000 V, VGE=±15 V, RG=6.4 Ω, T j =25 °C, INDUCTIVE LOAD CAPACITANCE CHARACTERISTICS (TYPICAL) G-E short-circuited, T j =25 °C 1000 100 Cies t r r (ns), I r r (A) CAPACITANCE (nF) 10 1 Coes trr 100 Irr Cres 0.1 0.01 10 0.1 1 10 1 100 VCE (V) COLLECTOR-EMITTER VOLTAGE TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (MAXIMUM) IC=75 A, T j =25 °C Single pulse, TC=25°C R t h ( j - c ) Q =0.16 K/W, R t h ( j - c ) D =0.29 K/W Zth(j-c) NORMALIZED TRANSIENT THERMAL IMPEDANCE VGE (V) VCC=1000 V GATE-EMITTER VOLTAGE 100 IE (A) GATE CHARGE CHARACTERISTICS (TYPICAL) 20 15 VCC=800 V 10 5 0 0 10 EMITTER CURRENT 100 200 300 GATE CHARGE 400 500 600 700 QG (nC) 1 0.1 0.01 0.001 0.00001 0.0001 0.001 0.01 TIME (S) Publication Date : June.2011 7 0.1 1 10 < IGBT MODULES > CM75DY-34A HIGH POWER SWITCHING USE INSULATED TYPE Keep safety first in your circuit designs! Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials •These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. •Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. •All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (www.MitsubishiElectric.com/semiconductors/). •When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information containedherein. •Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. •The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials. •If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. •Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein. © 2011 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED. Publication Date : June.2011 8