ATP218 Ordering number : EN8970A SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET ATP218 General-Purpose Switching Device Applications Features • • • ON-resistance RDS(on)1=2.9mΩ(typ.) 2.5V drive Protection diode in Input Capacitance Ciss=6600pF(typ.) Halogen free compliance • • Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) ID IDP Drain Current (PW≤10μs) Allowable Power Dissipation Unit 30 PW≤10μs, duty cycle≤1% V 100 A 300 A 60 W Channel Temperature PD Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *1 EAS IAV 235 mJ 50 A Avalanche Current *2 Tc=25°C V ±10 Note : *1 VDD=15V, L=100μH, IAV=50A *2 L≤100μH, Single pulse Package Dimensions Product & Package Information unit : mm (typ) 7057-001 • Package : ATPAK • JEITA, JEDEC :• Minimum Packing Quantity : 3,000 pcs./reel ATP218-TL-H 1.5 6.5 0.4 0.4 0.5 4 Packing Type: TL 4.6 2.6 Marking ATP218 2.3 2.3 6.05 4.6 0.55 0.7 1.7 0.6 0.1 0.5 3 0.8 Electrical Connection 2,4 2 1 9.5 7.3 LOT No. TL 0.4 1 : Gate 2 : Drain 3 : Source 4 : Drain 1 SANYO : ATPAK 3 http://semicon.sanyo.com/en/network 62012 TKIM/51111PA TKIM TC-00002592 No.8970-1/7 ATP218 Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS Conditions Ratings min typ Unit max 30 ID=1mA, VGS=0V VDS=30V, VGS=0V V 1 μA ±10 μA Gate-to-Source Leakage Current IGSS Cutoff Voltage VGS(off) VGS=±8V, VDS=0V VDS=10V, ID=1mA Forward Transfer Admittance | yfs | VDS=10V, ID=50A 260 Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 ID=50A, VGS=4.5V ID=25A, VGS=2.5V 2.9 3.8 mΩ 4.0 5.6 mΩ Input Capacitance Ciss Output Capacitance Coss 0.5 VDS=10V, f=1MHz 1.3 V S 6600 pF 780 pF Reverse Transfer Capacitance Crss 600 pF Turn-ON Delay Time td(on) 88 ns Rise Time tr 960 ns Turn-OFF Delay Time td(off) 340 ns Fall Time tf Total Gate Charge Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD See specified Test Circuit. VDS=15V, VGS=4.5V, ID=100A 320 ns 70 nC 20 nC 14 IS=100A, VGS=0V 0.91 nC 1.2 V Switching Time Test Circuit 4.5V 0V VDD=15V VIN ID=50A RL=0.3Ω VIN D PW=10μs D.C.≤1% VOUT G ATP218 P.G 50Ω S Ordering Information Device ATP218-TL-H Package Shipping memo ATPAK 3,000pcs./reel Pb Free and Halogen Free No.8970-2/7 ATP218 ID -- VDS 40 30 30 10 VGS=1.5V 1.0 1.5 2.0 2.5 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ ID=25A 50A 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0 1 2 3 4 5 6 7 8 9 100 7 5 C 5° --2 = Tc °C 75 3 2 10 7 5 2 3 5 7 1.0 2 3 5 7 10 2 3 Drain Current, ID -- A VDD=15V VGS=4.5V 2 1 --40 --20 0 20 40 60 80 100 120 140 160 IT16421 IS -- VSD VGS=0V 0 0.2 0.4 0.6 0.8 1.0 Ciss, Coss, Crss -- VDS 100000 7 5 1.2 IT16423 f=1MHz 3 1000 7 5 3 2 td(off) 2 10000 7 5 tf tr 100 7 5 3 2 td(on) 10 7 5 3 2 1.0 0.1 3 Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 5 7 100 IT16422 SW Time -- ID 10000 7 5 3 2 4 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 3 2 1.0 0.1 A =25 , ID V 5 =2. A =50 V GS , ID V 5 . =4 VGS 5 Case Temperature, Tc -- °C 3 °C 25 2.5 IT16419 6 0 --60 10 VDS=10V 2 2.0 7 IT16420 | yfs | -- ID 1000 7 5 1.5 RDS(on) -- Tc Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S Gate-to-Source Voltage, VGS -- V 1.0 8 5.5 4.5 0.5 Gate-to-Source Voltage, VGS -- V Tc=25°C 5.0 0 IT16418 RDS(on) -- VGS 6.0 0 3.0 5°C 25° C --25 °C 0.5 Tc= 7 0 Drain-to-Source Voltage, VDS -- V Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 25° C 20 0 60 Tc= 75° C 50 90 --2 5°C 1.8V 4.5 60 Drain Current, ID -- A 70 VDS=10V 120 V 3.5 V 8.0V Drain Current, ID -- A 80 2.0V ID -- VGS 150 Tc=25°C 3.0V 90 2 .5 V 6.0V 100 Ciss 3 2 1000 7 5 Coss Crss 3 2 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Drain Current, ID -- A 2 3 5 71000 IT16424 100 0 5 10 15 20 25 Drain-to-Source Voltage, VDS -- V 30 IT16425 No.8970-3/7 ATP218 VGS -- Qg 3 2 0 10 20 30 40 50 Total Gate Charge, Qg -- nC PD -- Tc 70 40 30 20 10 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT16428 0μ s 10 μs Tc=25°C Single pulse 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 IT16427 Drain-to-Source Voltage, VDS -- V EAS -- Ta 120 50 0 1m s 10 m 10 s 0m s Operation in this area is limited by RDS(on). IT16426 60 0 10 7 5 3 2 0.1 0.1 Avalanche Energy derating factor -- % Allowable Power Dissipation, PD -- W 70 60 ID=100A 100 7 5 3 2 1.0 7 5 3 2 10 on ati er 1 IDP=300A (PW≤10μs) op Drain Current, ID -- A 4 0 ASO 1000 7 5 3 2 VDS=15V ID=100A DC Gate-to-Source Voltage, VGS -- V 5 100 80 60 40 20 0 0 25 50 75 100 125 Ambient Temperature, Ta -- °C 150 175 IT16429 No.8970-4/7 ATP218 Taping Specification ATP218-TL-H No.8970-5/7 ATP218 Outline Drawing ATP218-TL-H Land Pattern Example Mass (g) Unit 0.266 mm * For reference Unit: mm 6.7 6.5 1.6 2 1.5 2.3 2.3 No.8970-6/7 ATP218 Note on usage : Since the ATP218 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No.8970-7/7