2SK715 Ordering number : EN2543A SANYO Semiconductors DATA SHEET 2SK715 N-Channel Junction Silicon FET AM Tuner, RF Amplifier Applications Applications • • AM tuner RF amp, low-noise amp HF low-noise amp Features • • • • Adoption of FBET process Large ⏐yfs⏐ Small Ciss Very low noise figure Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Gate-to-Drain Voltage VDSS VGDS Gate Current Drain Current Conditions Ratings Unit 15 V --15 V IG 10 mA ID PD 50 mA Allowable Power Dissipation 300 mW Junction Temperature Tj Storage Temperature Tstg Package Dimensions Product & Package Information unit : mm (typ) 7524-005 • Package : SPA • JEITA, JEDEC : SC-72 • Minimum Packing Quantity : 2,500 pcs./box 2SK715U-AC 2SK715V-AC 2.2 Marking 1.8 3.0 4.0 Rank °C °C Electrical Connection 2 K715 LOT No. 0.6 0.4 0.5 125 --55 to +125 15.0 0.4 1 2 0.4 1 3 3 1.3 0.7 0.7 1.3 3.0 3.8 1 : Source 2 : Gate 3 : Drain SANYO : SPA http://www.sanyosemi.com/en/network/ N1412 TKIM/42899TH (KT)/4237TA, TS No.2543-1/7 2SK715 Electrical Characteristics at Ta=25°C Parameter Symbol Gate-to-Drain Breakdown Voltage V(BR)GDS IGSS IDSS* Gate-to-Source Leakage Current Zero-Gate Voltage Drain Current Cutoff Voltage Forward Transfer Admittance VGS(off) | yfs | Input Capacitance Ciss Reverse Transfer Capacitance Crss Noise Figure NF Ratings Conditions min typ IG=--10μA, VDS=0V VGS=--10V, VDS=0V --15 VDS=5V, VGS=0V VDS=5V, ID=100μA 5.0* V --0.6 25 VDS=5V, VGS=0V, f=1kHz VDS=5V, Rg=1kΩ, ID=1mA, f=1kHz Unit max --1.0 nA 24.0* mA --1.4 V 50 mS 10 pF 3.0 pF 1.5 dB * : The 2SK715 is classified by IDSS as follows : (unit : mA) Rank IDSS T 5.0 to 8.5 U 7.3 to 12.0 V 10.0 to 17.0 W 14.5 to 24.0 Ordering Information Package Shipping 2SK715U-AC Device SPA 2,500pcs./box 2SK715V-AC SPA 2,500pcs./box ID -- VDS 16 memo Pb Free ID -- VGS 16 --0.1V 8 --0.2V 4 --0.3V 0 0 0.4 0.8 1.2 1.6 mA 0 =2 SS --0.8 --0.6 --0.3V --0.4V 4 --0.5V --0.6V ID mA 10 A 5m --0.4 --0.2 Gate-to-Source Voltage, VGS -- V 2 0 ITR00871 4 6 8 Gate-to-Source Voltage, VGS -- V 10 ITR00870 VGS(off) -- IDSS 2 20 --1.0 8 0 VDS=5V 30 0 --1.2 --0.2V ITR00869 ID -- VGS 10 12 0 2.0 Drain-to-Source Voltage, VDS -- V 40 --0.1V --0.4V --0.5V Drain Current, ID -- μA Drain Current, ID -- mA V GS=0 12 Cutoff Voltage, VGS(off) -- V Drain Current, ID -- mA V =0 GS VDS=5V ID=100μA --1.0 7 5 3 2 --0.1 3 5 7 10 2 Drain Current, IDSS -- mA 3 5 ITR00872 No.2543-2/7 2SK715 | yfs | -- IDSS 5 3 2 3 5 7 2 10 3 Drain Current, IDSS -- mA 10 7 5 3 2 1.0 3 5 7 2 10 Drain-to-Source Voltage, VDS -- V NF -- f 14 8 6 4 Rg=500Ω 2 10kΩ 5 1k 2 5 10k 2 5 100k 2 Frequency, f -- Hz PD -- Ta Allowable Power Dissipation, PD -- mW 350 3 mA =5 S I DS 2 10 7 7 2 1.0 3 5 7 2 10 3 Crss -- VDS 5 7 ITR00874 VGS=0 f=1MHz 10 7 5 3 2 7 2 1.0 3 5 7 10 Drain-to-Source Voltage, VDS -- V ITR00875 10 5 100 2 10m 1.0 3 NF -- f 14 2 3 ITR00876 VDS=5V Rg=1kΩ 12 Noise Figure, NF -- dB Noise Figure, NF -- dB 12 2 A 0m A 2 5 Drain Current, ID -- mA VGS=5V ID=10mA 0 10 7 5 5 VGS=0 f=1MHz 7 100 2 2 2 VDS=5V f=1kHz ITR00873 Ciss -- VDS 3 Input Capacitance, Ciss -- pF Forward Transfer Admittance, | yfs | -- mS VDS=5V VGS=0 f=1kHz 7 10 | yfs | -- ID 2 Reverse Transfer Capacitance, Crss -- pF Forward Transfer Admittance, | yfs | -- mS 100 10 8 6 4 2 ID=1mA 3mA 10mA 1kΩ 5 1M 2 ITR00877 0 10 2 5 100 2 5 1k 2 5 10k 2 Frequency, f -- Hz 5 100k 2 5 1M 2 ITR00878 300 250 200 150 100 50 0 0 20 40 60 80 100 Ambient Temperature, Ta -- °C 120 140 ITR00879 No.2543-3/7 2SK715 Taping Specification 2SK715U-AC, 2SK715V-AC No.2543-4/7 2SK715 No.2543-5/7 2SK715 Outline Drawing 2SK715U-AC, 2SK715V-AC Mass (g) Unit 0.13 mm * For reference No.2543-6/7 2SK715 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of November, 2012. Specifications and information herein are subject to change without notice. PS No.2543-7/7