SANYO 2SD1628

Ordering number:EN1781A
NPN Epitaxial Planar Silicon Transistor
2SD1628
High-Current Switching Applications
Applications
Package Dimensions
· Strobe DC-DC converters, relay drivers, hammer
drivers, lamp drivers, motor drovers.
unit:mm
2038A
[2SD1628]
Features
4.5
1.6
0.4
1.0
2.5
1.5
0.5
3
2
1.5
4.25max
· Low saturation voltage.
· High hFE.
· Large current capacity.
· Very small size making it easy to provide highdensity, small-sized hybrid IC’s.
1
0.4
3.0
1 : Base
2 : Collector
3 : Emitter
SANYO : PCP
(Bottom view)
0.75
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
60
V
Collector-to-Emitter Voltage
VCEO
VEBO
20
V
6
V
IC
5
A
ICP
8
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
PC
Junction Temperature
Tj
Storage Temperature
Tstg
500
Mounted on ceramic board (250mm2× 0.8mm)
A
mW
1.5
W
150
˚C
–55 to +150
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Collector Cutoff Current
ICBO
Emitter Cutoff Current
IEBO
VCB=50V, IE=0
VEB=5V, IC=0
DC Current Gain
hFE1
hFE2
VCE=2V, IC=0.5A
VCE=2V, IC=3A
Gain-Bandwidth Product
Output Capacitance
fT
Cob
* The 2SD1628 is classified by 0.5A hFE as follows : 120
Marking : DK
Ratings
Conditions
min
200
160
F
max
120*
Unit
100
nA
100
nA
560*
95
VCE=10V, IC=50mA
VCB=10V, f=1MHz
E
typ
320
280
G
560
120
MHz
45
pF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
21599TH (KT)/5277KI/3045MW, TS No.1781–1/4
2SD1628
Continued from preceding page.
Parameter
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Symbol
VCE(sat)
VBE(sat)
Conditions
Ratings
min
typ
IC=3A, IB=60mA
IC=3A, IB=60mA
max
500
1.5
Unit
mV
V
Turn-ON Time
ton
See specified Test Circuit.
30
ns
Strage Time
tstg
tf
See specified Test Circuit.
300
ns
See specified Test Circuit.
40
ns
Fall Time
Switching Time Test Circuit
No.1781–2/4
2SD1628
No.1781–3/4
2SD1628
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 1999. Specifications and information herein are subject
to change without notice.
PS No.1781–4/4
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.