2SB1737 Ordering number : ENN8401 2SB1737 PNP Epitaxial Planar Silicon Darlington Transistor Driver Applications Applications • Suitable for use in control motor drivers, printer hammer drivers, relay drivers, audio output and constant-voltage regulators. Features • • • • High DC current gain. Wide ASO. Low saturation voltage. Adoption of MBIT process. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO --180 V Collector-to-Emitter Voltage VCEO --160 V Emitter-to-Base Voltage VEBO --6 V IC --10 A ICP --16 A 2.5 W Collector Current Collector Current (Pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C 110 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain hFE fT Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage Collector Sustain Voltage V(BR)CBO VCEO(SUS) Conditions VCB=--180V, IE=0A VEB=--6V, IC=0A VCE=--5V, IC=--6.5A Ratings min typ max Unit --0.1 mA --10 mA 5000 VCE=--5V, IC=--6.5A IC=--5.5A, IB=--11mA 15 MHz --2.0 V --2.8 V IC=--5.5A, IB=--11mA IC=--1mA, IE=0A --180 V IC=--100mA, IB=0A --160 V Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 81205CB MS IM TB-00001698 No.8401-1/3 2SB1737 Continued from preceding page. Parameter Symbol Turn-ON Time ton tstg tf Storage Time Fall Time Ratings Conditions min 0.9 µs See specified Test Circuit. 4.0 µs See specified Test Circuit. 3.0 µs Switching Time Test Circuit OUTPUT 4.8 3.2 IB1 2.0 3.5 2.6 T.U.T IB2 RB INPUT 20.0 1.2 PW=50µs D.C.≤1% RL VR 50Ω 1.3 15.0 Unit max See specified Test Circuit. Package Dimensions unit : mm 7503-003 15.6 14.0 typ R1 1.6 R2 + + 20.0 2.0 1.0 100µF 0.6 470µF VCC= --50V VBE=5V 2 3 1.4 SANYO : TO-3PB IC -- VCE --8 --7 --6 --5 --2mA --1mA --800µA --600µA --4 --400µA --3 --2 --8 --7 --6 --5 --4 --3 --2 --1 --1 IB=0µA 0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 --4.5 Collector-to-Emitter Voltage, VCE -- V 0 --5.0 0 Base-to-Emitter Voltage, VBE -- V °C 120 Ta= C 25° 3 2 --40 °C 1000 7 5 3 IC / IB=500 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 3 2 IT06678 VCE(sat) -- IC --10 VCE= --5V 10000 7 5 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 --2.0 --2.2 --2.4 --2.6 --2.8 --3.0 IT06677 hFE -- IC 100000 7 5 DC Current Gain, hFE VCE= --5V --9 Collector Current, IC -- A Collector Current, IC -- A --9 IC -- VBE --10 from above --10mA --9mA --8mA --7mA --6mA --5mA --4mA --3mA C --10 --40 ° 5.45 20° C 25° C 5.45 IC= --500IB1= --500IB2= --6.5A 1 : Base 2 : Collector 3 : Emitter 0.6 Ta= 1 1 5 3 2 25°C Ta= --40°C --1.0 7 120°C 5 3 2 2 100 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT06679 --0.1 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT06680 No.8401-2/3 2SB1737 VBE(sat) -- IC --10 25°C 2 Ta= --40°C 120°C --1.0 ICP= --16A P T= IC= --10A 1m 7 s 10 m DC 100 s op ms er ati on 5 3 2 --1.0 7 5 3 7 2 5 --0.1 2 3 5 7 2 --1.0 3 Collector Current, IC -- A 5 Tc=25°C Single pulse --0.1 --1.0 7 --10 IT06681 2 3 5 7 --10 2 3 5 7 --100 2 Collector-to-Emitter Voltage, VCE -- V PC -- Ta 3.0 3 IT06682 PC -- Tc 140 120 2.5 Collector Dissipation, PC -- W Collector Dissipation, PC -- W 2 5 3 Forward Bias A S O 3 IC / IB=500 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 2.0 No he at 1.5 sin k 1.0 0.5 110 100 80 60 40 20 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT06683 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT06684 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2005. Specifications and information herein are subject to change without notice. PS No.8401-3/3