FILTRONIC LP7612P70

LP7612P70
PACKAGED HIGH DYNAMIC RANGE PHEMT
•
FEATURES
♦ 20 dBm Output Power at 1-dB Compression at 18 GHz
♦ 7.5 dB Power Gain at 18 GHz
♦ 16 dB Small Signal Gain at 2 GHz
♦ 0.8 dB Noise Figure at 2 GHz
•
DESCRIPTION AND APPLICATIONS
The LP7612P70 is a packaged Aluminum Gallium Arsenide / Indium Gallium Arsenide
(AlGaAs/InGaAs) pseudomorphic High Electron Mobility Transistor (pHEMT), utilizing an
Electron-Beam direct-write 0.25 µm by 200 µm Schottky barrier gate. The recessed “mushroom”
Ti/Pt/Au gate structure minimizes parasitic gate-source and gate resistances. The epitaxial structure
and processing have been optimized for high dynamic range. The LP7612’s active areas are
passivated with Si3 N4 , and the P70 ceramic package is ideal for low-cost, high-performance
applications that require a surface-mount package.
Typical applications include high dynamic range receiver preamplifiers for commercial applications
including Cellular/PCS systems, WLAN and WLL systems, and other types of high-gain
applications for radio link systems.
•
ELECTRICAL SPECIFICATIONS @ TAmbient = 25°°C*
Parameter
Symbol
Test Conditions
Min
Saturated Drain-Source Current**
IDSS
VDS = 2 V; VGS = 0 V
40
Power at 1-dB Compression
P-1dB
VDS = 5 V; IDS = 50% IDSS
19
20
dBm
Power Gain at 1-dB Compression
G-1dB
VDS = 5 V; IDS = 50% IDSS
6.5
7
dB
Power-Added Efficiency
PAE
VDS = 5 V; IDS = 50% IDSS
45
%
Noise Figure
NF
VDS = 3.3 V; IDS = 25% IDSS;
f=2 GHz
0.8
Maximum Drain-Source Current
IMAX
VDS = 2 V; VGS = 1 V
125
mA
Transconductance
GM
VDS = 2 V; VGS = 0 V
80
mS
Gate-Source Leakage Current
IGSO
VGS = -5 V
Pinch-Off Voltage
VP
VDS = 2 V; IDS = 1 mA
Gate-Source Breakdown
Voltage Magnitude
|VBDGS|
IGS = 1 mA
Gate-Drain Breakdown
|VBDGD|
IGD = 1 mA
Voltage Magnitude
*frequency=18 GHz, unless otherwise noted
**Formerly binned as: LPD7612P70-1 = 40-65 mA and LPD7612P70–2 = 66-85 mA
Phone: (408) 988-1845
Fax: (408) 970-9950
http:// www.filss.com
60
Typ
Max
Units
85
mA
1.2
dB
1
15
µA
-0.25
-0.8
-1.5
V
-6
-7
V
-8
-9
V
Revised: 1/20/01
Email: [email protected]
LP7612P70
PACKAGED HIGH DYNAMIC RANGE PHEMT
•
ABSOLUTE MAXIMUM RATINGS
Notes:
•
•
•
•
Parameter
Symbol
Test Conditions
Drain-Source Voltage
VDS
Gate-Source Voltage
Min
Max
Units
TAmbient = 22 ± 3 °C
6
V
VGS
TAmbient = 22 ± 3 °C
-3
V
Drain-Source Current
IDS
TAmbient = 22 ± 3 °C
2xIDSS
mA
Gate Current
IG
TAmbient = 22 ± 3 °C
5
mA
RF Input Power
PIN
TAmbient = 22 ± 3 °C
60
mW
Channel Operating Temperature
TCH
TAmbient = 22 ± 3 °C
175
ºC
Storage Temperature
TSTG
—
175
ºC
Total Power Dissipation
PTOT
TAmbient = 22 ± 3 °C
400
mW
-65
Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.
Power Dissipation defined as: PTOT ≡ (PDC + PIN) – POUT, where
PDC: DC Bias Power
PIN: RF Input Power
POUT: RF Output Power
Absolute Maximum Power Dissipation to be de-rated as follows above 25°C:
PTOT= 400mW – (2.7 mW/°C) x THS
where THS = heatsink or ambient temperature.
This PHEMT is susceptible to damage from Electrostatic Discharge. Proper precautions should be used when handling these
devices.
•
HANDLING PRECAUTIONS
To avoid damage to the devices care should be exercised during handling. Proper Electrostatic
Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and
testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control
measures can be found in MIL-STD-1686 and MIL-HDBK-263.
•
APPLICATIONS NOTES & DESIGN DATA
Applications Notes are available from your local Filtronic Sales Representative or directly from the
factory. Complete design data, including S-parameters, noise data, and large-signal models are
available on the Filtronic web site.
Phone: (408) 988-1845
Fax: (408) 970-9950
http:// www.filss.com
Revised: 1/20/01
Email: [email protected]
LP7612P70
PACKAGED HIGH DYNAMIC RANGE PHEMT
•
PACKAGE OUTLINE
(dimensions in mils)
All information and specifications are subject to change without notice.
Phone: (408) 988-1845
Fax: (408) 970-9950
http:// www.filss.com
Revised: 1/20/01
Email: [email protected]