FILTRONIC LP6836P100-3

Filtronic
LP6836P100
Packaged 0.25W Power PHEMT
Solid State
FEATURES
•
•
•
•
•
GATE
+24.5 dBm Typical Power at 15 GHz
12 dB Typical Power Gain at 15 GHz
Low Intermodulation Distortion
55% Power-Added-Efficiency
Color-coded by IDSS range
SOURCE
DRAIN
DESCRIPTION AND APPLICATIONS
The LP6836P100 is a packaged Aluminum Gallium Arsenide / Indium Gallium Arsenide (AlGaAs/InGaAs) Pseudomorphic
High Electron Mobility Transistor (PHEMT), utilizing an Electron-Beam direct-write 0.25 µm by 360 µm Schottky barrier
gate. The recessed “mushroom” gate structure minimizes parasitic gate-source and gate resistances. The epitaxial
structure and processing have been optimized for reliable high-power applications. The LP6836 also features Si3N4
passivation and is available in die form, or P70 packages. Packages are color-coded by IDSS range.
Typical applications include commercial and military high-performance power amplifiers, including SATCOM uplink
transmitters, and medium-haul digital radio transmitters.
The LP6836P100 may be procured in a variety of grades, depending upon specific user requirements. Standard lot
screening is patterned after MIL-STD-19500, JANC grade. Space level screening to FSS JANS grade is also available.
PERFORMANCE SPECIFICATIONS (TA = 25°C)
SYMBOLS
IDSS
P1dB
G1dB
ηADD
IMAX
GM
VP
IGSO
BVGS
BVGD
PARAMETERS
Saturated Drain-Source Current
VDS = 2V VGS = 0V
LP6836-P100-1 Blue
LP6836-P100-2 Green
LP6836-P100-3 Red
Output Power at 1dB Gain Compression
f = 15 GHz
VDS = 8.0V, IDS = 50% IDSS
Power Gain at 1dB Gain Compression
f = 15 GHz
VDS = 8.0V, IDS = 50% IDSS
Power-Added Efficiency
Maximum Drain-Source Current
VDS = 2V VGS = +1V
Transconductance
VDS = 2V VGS = 0V
Pinch-Off Voltage
VDS = 2V IDS = 2mA
Gate-Source Leakage Current
VGS = -5V
Gate-Source Breakdown Voltage
IGS = 2mA
Gate-Drain Breakdown Voltage
IGD = 2mA
MIN
80
96
106
TYP
90
100
115
23.5
24.5
dBm
8.5
9.5
55
190
95
-0.8
1
-15
-16
dB
%
mA
mS
V
70
-0.25
-11
-12
MAX
95
105
125
-1.5
15
UNITS
mA
µA
V
V
Get Package Model
DSS-031 WF
Phone: (408) 988-1845
Internet: http://www.filtronicsolidstate.com
Fax: (408) 970-9950
Filtronic
LP6836P100
Packaged 0.25W Power PHEMT
Solid State
ABSOLUTE MAXIMUM RATINGS
(25°C)
1
SYMBOL
PARAMETER
RATING
VDS
Drain-Source Voltage
10V
VGS
Gate-Source Voltage
-4V
IDS
Drain-Source Current
2 x IDSS
IG
Gate Current
18 mA
PIN
RF Input Power
180 mW
TCH
Channel Temperature
175°C
TSTG
Storage Temperature
-65/175°C
3,4
PT
Power Dissipation
1.3W
RECOMMENDED CONTINUOUS
OPERATING LIMITS
2
SYMBOL
PARAMETER
RATING
VDS
Drain-Source Voltage
8V
VGS
Gate-Source Voltage
-0.8V
IDS
Drain-Source Current
0.85 x IDSS
IG
Gate Current
3 mA
PIN
RF Input Power
90 mW
TCH
Channel Temperature
150°C
TSTG
Storage Temperature
-20/50°C
3,4
PT
Power Dissipation
1.1 W
GXdB
Gain Compression
8 dB
NOTES:
1. Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.
2. Recommended Continuous Operating Limits should be observed for reliable device operation.
3. Power Dissipation defined as: PT ≡ (PDC + PIN) - POUT, where: PDC = DC bias power, POUT = RF output power, and PIN
= RF input power.
4. Power Dissipation to be de-rated as follows above 25°C:
Absolute Maximum:
PT = 1.3W - (9mW/°C) x THS
Recommended Continuous Operating: PT = 1.1W - (9mW/°C) x THS
where THS = heatsink or ambient temperature.
5. Specifications subject to change without notice.
HANDLING PRECAUTIONS:
Care should be exercised during handling to avoid damage to the devices. Proper Electrostatic Discharge (ESD)
precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be
treated as Class 1A (0-500V), and further information on ESD control measures can be found in MIL-STD-1686 and MILHDBK-263.
APPLICATIONS NOTES AND DESIGN DATA:
Applications Notes are available from your local FSS Sales Representative, or directly from the factory. Complete design
data, including S-parameters, Noise data, and Large-Signal models, is available on 3.5” diskette, or may be down-loaded
from our Web Page.
PACKAGE OUTLINE
(DIMENSIONS IN INCHES)
0.256
0.062
0.098
0.065
0.098
0.020
0
0.024
0.240
0.035
0.335
Get Package Model
DSS-031 WF
Phone: (408) 988-1845
Internet: http://www.filtronicsolidstate.com
Fax: (408) 970-9950