GILWAY GHB-3M35-UV

55 Commerce Way
Woburn, MA 01801
(781) 935 - 4442
(781) 938 - 5867
www.gilway.com
Description
The source color devices are made with InGaN on SiC
GHB-3M35-UV
Light Emitting Di ode.
This device radiates intense ultraviolet (UV) light when
operated .Most of the UV light emitted is not visible.
Exposure to UV radiation can be harmful to your health.
Protect your eyes and skin during operation.
Do not look directly at the device during operation.
Features
!HIGH
Exposure to UV light ,even for a brief period, can damage
PERFORMANCE
!SUITABLE
your eyes.
FOR AUTOMOTIVE DASHBOARD
LIGHTING, WHITE LEDS AND BACKLIGHTING
Do not operate the device unless you have had proper
safety training and take appropriate precautions.
Do not permit children or untrained personnel to operate the
device.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
T- 1 (3mm) SOLID STATE LAMP
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is 0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
REV NO: V.6
D ATE: JUN/12/2003
PAGE: 1 OF 3
Selection Guide
Part No.
Dice
Lens Type
ULTRAVIOLET ( InGaN )
GHB-3M35-UV
Iv (mcd)
@ 20mA
WATER CLEAR
Viewing
Angl e
Min.
Typ.
2q
q1/2
50
90
34 °
Note:
1. q1/2 is the angle from optical centerline where the lumino us intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T A =25°C
Symbol
Parameter
Device
lpeak
Peak Wavelength
Ultraviolet
lD
Dominate Wavelength
Dl1/2
Typ.
Max.
Units
Test Conditions
400
nm
IF=20mA
Ultraviolet
395
nm
IF=20mA
Spectral Line Half-width
Ultraviolet
26
nm
IF=20mA
C
Capacitance
Ultraviolet
30
pF
V F =0V;f=1MHz
VF
Forward Voltage
Ultraviolet
3.8
4.2
V
IF=20mA
IR
Reverse Current
Ultraviolet
10
uA
V R = 5V
Absolute Maximum Ratings at T A=25°C
Parameter
Ultraviolet
Units
Power dissipation
100
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
-40°C To +85°C
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
REV NO: V.6
D ATE: JUN/12/2003
PAGE: 2 OF 3
REV NO: V.6
D ATE: JUN/12/2003
PAGE: 3 OF 3