TI TAS5026APAGRG4

TM
Data Manual
January 2004
DAV Digital Audio/Speaker
SLES068A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and is
an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303, Dallas, Texas 75265
Copyright  2004, Texas Instruments Incorporated
Contents
Contents
Section
Page
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
Functional Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3
Terminal Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5
Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Architecture Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1
Clock and Serial Data Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1.1
Normal-Speed, Double-Speed, and Quad-Speed Selection . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1.2
Clock Master/Slave Mode (M_S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.3
Clock Master Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.4
Clock Slave Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1.5
PLL Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1.6
DCLK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1.7
Serial Data Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2
Reset, Power Down, and Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2.1
Reset—RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2.2
Power Down—PDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.2.3
General Status Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.2.4
Error Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.3
Signal Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.3.1
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.3.2
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.3.3
Automute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.3.4
Individual Channel Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.3.5
De-Emphasis Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.4
Pulse Width Modulator (PWM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.4.1
Clipping Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.4.2
Error Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.4.3
Individual Channel Error Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.4.4
PWM DC-Offset Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.4.5
Interchannel Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.4.6
PWM/H-Bridge and Discrete H-Bridge Driver Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.5
I2C Serial Control Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.5.1
Single-Byte Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.5.2
Multiple-Byte Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.5.3
Single-Byte Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.5.4
Multiple-Byte Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3
Serial
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Control Interface Register Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Status Register (0x00) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Status Register (0x01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Control Register 0 (0x02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Control Register 1 (0x03) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Recovery Register (0x04) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automute Delay Register (0x05) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC-Offset Control Registers (0x06−0x0B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
February 2003—Revised January 2004
SLES068A
1
1
2
3
4
4
25
26
26
26
27
27
28
28
iii
List of Illustrations
3.8
3.9
4
5
Interchannel Delay Registers (0x0C−0x11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Individual Channel Mute Register (0x19) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
System Procedures for Initialization, Changing Data Rates, and Switching Between Master
and Slave Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
System Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
Data Sample Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
Changing Between Master and Slave Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
31
32
35
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1
Absolute Maximum Ratings Over Operating Temperature Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3
Electrical Characteristics Over Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.1
Static Digital Specifications Over Recommended Operating Conditions . . . . . . . . . . . . . .
5.3.2
Digital Interpolation Filter and PWM Modulator Over Recommended
Operating Conditions (Fs = 48 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.3
TAS5026A/TAS5110 System Performance Measured at the Speaker
Terminals Over Recommended Operating Conditions (Fs = 48 kHz) . . . . . . . . . . . . . . . .
5.4
Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4.1
Command Sequence Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4.2
Serial Audio Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4.3
Serial Control Port—I2C Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
37
37
37
37
38
38
38
42
45
6
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1
Serial Audio Interface Clock Master and Slave Interface Configuration . . . . . . . . . . . . . . . . . . . . . . . .
6.1.1
Slave Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.2
Master Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
48
48
48
7
Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
37
Appendix A—Volume Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
List of Illustrations
Figure
Title
Page
2−1 Crystal Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2−2 External PLL Loop Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2−3 I2S 64-Fs Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2−4 I2S 48-Fs Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2−5 Left-Justified 64-Fs Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2−6 Left-Justified 48-Fs Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2−7 Right-Justified 64-Fs Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2−8 Right-Justified 48-Fs Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2−9 DSP Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2−10 Attenuation Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2−11 De-Emphasis Filter Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2−12 PWM Outputs and H-Bridge Driven in BTL Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2−13 Typical I2C Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2−14 Single-Byte Write Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2−15 Multiple-Byte Write Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2−16 Single-Byte Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
iv
SLES068A
February 2003—Revised January 2004
List of Tables
2−17 Multiple-Byte Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−1 RESET During System Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−2 Extending the I2C Write Interval Following Low-to-High Transition of RESET Terminal . . . . . . . . . . . . . . . . .
4−3 Changing the Data Sample Rate Using the DBSPD Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−4 Changing the Data Sample Rate Using the I2C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−5 Changing the Data Sample Rate With an Unstable MCLK_IN Using the DBSPD Terminal . . . . . . . . . . . . . .
4−6 Changing the Data Sample Rate With an Unstable MCLK_IN Using the I2C . . . . . . . . . . . . . . . . . . . . . . . . . .
4−7 Changing Between Master and Slave Clock Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−1 RESET Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−2 Power-Down and Power-Up Timing—RESET Preceding PDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−3 Power-Down and Power-Up Timing—RESET Following PDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−4 Error Recovery Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−5 Mute Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−6 Right-Justified, I2S, Left-Justified Serial-Protocol Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−7 Right, Left, and I2S Serial-Mode Timing Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−8 Serial Audio Ports Master-Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−9 DSP Serial-Port Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−10 DSP Serial-Port Expanded Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−11 DSP Absolute Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−12 SCL and SDA Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−13 Start and Stop Conditions Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−1 Typical TAS5026A Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−2 TAS5026A Serial Audio Port—Slave-Mode Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−3 TAS5026A Serial Audio Port—Master-Mode Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
31
32
33
33
34
35
36
38
39
40
41
41
42
43
43
43
44
44
45
45
47
48
48
List of Tables
Table
Title
Page
2−1 Normal-Speed, Double-Speed, and Quad-Speed Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2−2 Master and Slave Clock Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2−3 LRCLK and MCLK_IN Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2−4 DCLK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2−5 Supported Word Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2−6 Device Outputs During Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2−7 Values Set During Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2−8 Device Outputs During Power Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2−9 Volume Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2−10 De-Emphasis Filter Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2−11 Device Outputs During Error Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3−1 I2C Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3−2 General Status Register (Read Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3−3 Error Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3−4 System Control Register 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3−5 System Control Register 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3−6 Error Recovery Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
February 2003—Revised January 2004
SLES068A
v
List of Tables
3−7 Automute Delay Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−8 DC-Offset Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−9 Six Interchannel Delay Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−10 Individual Channel Mute Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi
SLES068A
28
28
28
29
February 2003—Revised January 2004
Introduction
1
Introduction
The TAS5026A is an innovative, cost-effective, high-performance 24-bit six-channel digital pulse-width
modulator (PWM) based on Equibit technology. Combined with a TI PurePath Digital audio amplifier power
stage, these devices use noise-shaping and sophisticated error correction algorithms to achieve high power
efficiency and high-performance digital audio reproduction. The TAS5026A is designed to drive up to six digital
power devices to provide six channels of digital audio amplification. The digital power devices can be six
conventional monolithic power stages (such as TAS5110) or six discrete differential power stages using gate
drivers and MOSFETs.
The TAS5026A has six independent volume controls and mute. The device operates in AD mode. This
all-digital audio system contains only two analog components in the signal chain—an LC low-pass filter at each
speaker terminal and can provide up to 96-dB SNR at the speaker terminals. The TAS5026A has a wide variety
of serial input options including right justified (16, 20, or 24 bit), I2S (16, 20, or 24 bit) left justified, or DSP
(16-bit) data formats. The device is fully compatible with AES standard sampling rates of 44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz including de-emphasis for 44.1-kHz and 48-kHz sample rates. The
TAS5026A was designed for home theater applications such as DVD minicomponent systems, home theater
in a box (HTIB), DVD receiver, A/V receiver, or TV sets.
1.1
Features
•
•
•
•
•
•
•
•
•
•
•
•
TI PurePath Digital Audio Amplifier
High Quality Audio
− 96-dB SNR
− <0.1% THD+N
Six-Channel Volume Control
− Patented Soft Volume
− Patented Soft Mute
16-, 20-, or 24-Bit Input Data
Sampling Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz
Supports Master and Slave Modes
3.3-V Power Supply Operation
Economical 64-Pin TQFP Package
Digital De-Emphasis: 32 kHz, 44.1 kHz, and 48 kHz
Clock Oscillator Circuit for Master Modes
Low Jitter Internal PLL
Soft Volume and Mute Update
Equibit and PurePath Digital are trademarks of Texas Instruments.
Other trademarks are the property of their respective owners.
SLES068A—February 2003—Revised January 2004
TAS5026A
1
Introduction
DVSS_PWM
DVDD_PWM
DVSS_RCL
DVDD_RCL
VREGC_CAP
VREGB_CAP
VREGA_CAP
AVSS_PLL
Functional Block Diagram
AVDD_PLL
1.2
Power Supply
PWM
Section
MCLK_IN
XTAL_OUT
XTAL_IN
PWM_AP_1
DBSPD
M_S
PLL_FLT_RET
SCLK
LRCLK
MCLKOUT
SDIN1
SDIN2
SDIN3
DM_SEL1
DM_SEL2
SDA
SCL
CSO
Clock,
PLL
and
Serial
Data
I/F
Signal
Processing
PWM_AP_2
PWM Ch.
PWM Ch.
Serial
Control
I/F
PWM_AM_2
VALID_2
Auto Mute
De-Emphasis
Soft Volume
Error Recovery
Soft Mute
Clip Detect
PWM Ch.
Output Control
PLL_FLT_OUT
PWM_AM_1
VALID_1
PWM Ch.
PWM AP_3
PWM AM_3
VALID_3
PWM_AP_4
PWM_AM_4
VALID_4
PWM_AP_5
PWM_AM_5
RESET
PDN
PWM Ch.
VALID_5
PWM Ch.
PWM_AP_6
PWM_AM_6
VALID_6
Reset,
Pwr Dwn
and
Status
CLIP
MUTE
ERR_RCVRY
2
TAS5026A
SLES068A—February 2003—Revised January 2004
Introduction
1.3
Terminal Assignments
AVDD_OSC
XTL_IN
XTL_OUT
AVSS_OSC
DVSS
PWM_AP_1
PWM_AM_1
VALID_1
PWM_AP_2
PWM_AM_2
VALID_2
PWM_AP_3
PWM_AM_3
VALID_3
NC
NC
PAG PACKAGE
(TOP VIEW)
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
NC
MCLK_IN
AVDD_PLL
PLL_FLT_OUT
PLL_FLT_RET
AVSS_PLL
NC
DVSS1
RST
ERR_RCVRY
MUTE
PDN
SDA
SCL
CS0
DVSS1
1
48
2
47
3
46
4
45
5
44
6
43
7
42
8
41
9
40
10
39
11
38
12
37
13
36
14
35
15
34
16
33
DVDD_RCL
DVSS_RCL
NC
DVDD_PWM
DVSS_PWM
PWM_AP_4
PWM_AM_4
VALID_4
PWM_AP_5
PWM_AM_5
VALID_5
PWM_AP_6
PWM_AM_6
VALID_6
NC
NC
DBSPD
CLIP
SDIN1
SDIN2
SDIN3
MCLK_OUT
SCLK
LRCLK
DVDD
DVSS1
NC
DEM_SEL2
DEM_SEL1
M_S
DVSS1
DVSS1
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
SLES068A—February 2003—Revised January 2004
TAS5026A
3
Introduction
1.4
Ordering Information
T
5026A
AS
PAG
Texas Instruments
Audio Solutions
Device Number
Package Type
AVAILABLE OPTIONS
PACKAGE
1.5
TA
PLASTIC 64-PIN TQFP
(PAG)
0°C to 70°C
TAS5026APAG
Terminal Functions
TERMINAL
NAME
AVDD_OSC
NO.
64
FUNCTION†
DESCRIPTION
P
Analog power supply for internal oscillator cells
AVDD_PLL
3
P
3.3-V analog power supply for PLL
AVSS_OSC
61
O
Analog ground for internal oscillator cells
AVSS_PLL
6
P
Analog ground for PLL
CLIP
18
O
CS0
15
I
Digital clipping indicator, active low
I2C device address select. This is an active high pin.
DBSPD
17
I
Sample rate is double speed (88.2 kHz or 96 kHz), active high
DM_SEL1
29
I
De-emphasis select bit 1 (0 = none, 01 = 32 kHz, 10 = 44.1 kHz
DM_SEL2
28
I
De-emphasis select bit 2, 10 = 48 kHz, 11 = undefined (none)
DVDD_PWM
45
P
3.3-V digital power supply for PWM
DVDD_RCL
48
P
3.3-V digital power supply for re-clocker
DVDD
25
P
3.3-V digital power supply for digital core and most of I/O buffers
DVSS
60
I
Voltage regulator enable, active low
DVSS_PWM
44
P
Digital ground for PWM
DVSS_RCL
47
P
Digital ground for re-clocker
8, 26,
31, 32
P
Digital ground for digital core and most of I/O buffers
ERR_RCVRY
10
I
Error recovery, active low
LRCLK
24
I/O
M_S
30
I
Master/slave mode input signal (master = 1, slave = 0)
MCLK_IN
2
I
MCLK input, slave mode
MCLK_OUT
22
O
MCLK output buffered system clock output M_S = 1; otherwise set to 0
MUTE
11
I
Mute input signal, active low
DVSS1
Serial audio data left/right clock (sampling rate clock) (input when M_S = 0; output when
M_S = 1)
† I = input; O = output; I/O = input/output; P = power
4
TAS5026A
SLES068A—February 2003—Revised January 2004
Introduction
TERMINAL
NAME
NC
NO.
FUNCTION†
DESCRIPTION
1, 7,
27, 33,
34, 36,
49, 50
—
No connection
PDN
12
I
Power down. This signal is active low.
PLL_FLT_OUT
4
I
PLL external filter
PLL_FLT_RET
5
I
PLL external filter
PWM_AM_1
58
O
PWM 1 output (differential -); {Positive H-bridge side}
PWM_AM_2
55
O
PWM 2 output (differential -); {Positive H-bridge side}
PWM_AM_3
52
O
PWM 3 output (differential -); {Positive H-bridge side}
PWM_AM_4
42
O
PWM 4 output (differential -); {Positive H-bridge side}
PWM_AM_5
39
O
PWM 5 output (differential -); {Positive H-bridge side}
PWM_AM_6
36
O
PWM 6 output (differential -); {Positive H-bridge side}
PWM_AP_1
59
O
PWM 1 output (differential +); {Positive H-bridge side}
PWM_AP_2
56
O
PWM 2 output (differential +); {Positive H-bridge side}
PWM_AP_3
53
O
PWM 3 output (differential +); {Positive H-bridge side}
PWM_AP_4
43
O
PWM 4 output (differential +); {Positive H-bridge side}
PWM_AP_5
40
O
PWM 5 output (differential +); {Positive H-bridge side}
PWM_AP_6
37
O
PWM 6 output (differential +); {Positive H-bridge side}
RST
9
I
System reset input. This signal is an active low.
SCL
14
I
I2C clock signal
SCLK
23
I/O
Serial audio data clock (master mode = output, slave mode = input)
SDA
13
I/O
I2C data signal
SDIN1
19
I
Serial audio data 1 input
SDIN2
20
I
Serial audio data 2 input
SDIN3
21
I
Serial audio data 3 input
VALID_1
57
O
Output indicating validity of PWM outputs, channel 1, active high
VALID_2
54
O
Output indicating validity of PWM outputs, channel 2, active high
VALID_3
51
O
Output indicating validity of PWM outputs, channel 3, active high
VALID_4
41
O
Output indicating validity of PWM outputs, channel 4, active high
VALID_5
38
O
Output indicating validity of PWM outputs, channel 5, active high
VALID_6
35
O
Output indicating validity of PWM outputs, channel 6, active high
XTL_IN
63
I
Crystal or TTL level clock input
XTL_OUT
62
O
Crystal output (not for external usage)
† I = input; O = output; I/O = input/output; P = power
SLES068A—February 2003—Revised January 2004
TAS5026A
5
Introduction
6
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
2
Architecture Overview
The TAS5026A is composed of six functional elements:
•
•
•
•
•
•
2.1
Clock, PLL, and serial data interface (I2S)
Reset/power-down circuitry
Serial control interface (I2C)
Signal processing unit
Pulse-width modulator (PWM)
Power supply
Clock and Serial Data Interface
The TAS5026A clock and serial data interface contain an input serial data slave and the clock master/ slave
interface. The serial data slave interface receives information from a digital source such as a DSP, S/PDIF
receiver, analog-to-digital converter (ADC), digital audio processor (DAP), or other serial bus master. The
serial data interface has three serial data inputs that can accept up to six channels of data at data sample rates
of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz. The serial data interfaces support
left justified and right justified for 16-, 20-, and 24-bits. In addition, the serial data interface supports the DSP
protocol for 16 bits and the I2S protocol for 24 bits.
The TAS5026A can function as a receiver or a generator for the MCLK_IN (master clock), SCLK (shift clock),
and LRCLK (left/right clock) signals that control the flow of data on the three serial data interfaces. The
TAS5026A is a clock master when it generates these clocks and is a clock slave when it receives these clocks.
The TAS5026A is a synchronous design that relies upon the master clock to provide a reference clock for all
of the device operations and communication via the I2C. When operating as a slave, this reference clock is
MCLK_IN. When operating as a master, the reference clock is either a TTL clock input to XTAL_IN or a crystal
attached across XTAL_IN and XTAL_OUT.
The clock and serial data interface has two control parameters: data sample rate and clock master or slave.
2.1.1 Normal-Speed, Double-Speed, and Quad-Speed Selection
The data sample rate is selected through a terminal (DBSPD) or the serial control register 0 (X02). The data
sample rate control sets the frequencies of the SCLK and LRCLK in clock slave mode and the output
frequencies of SCLK and LRCLK in clock master mode. There are three data rates: normal speed, double
speed, and quad speed.
Normal-speed mode supports data rates of 32 kHz, 44.1 kHz, and 48 kHz. Normal speed is supported in the
master and slave modes. Double-speed mode is used to support sampling rates of 88.2 kHz and 96 kHz.
Double speed is supported in master and slave modes. Quad-speed mode is used to support sampling rates
of 176.4 kHz and 192 kHz.
The PWM is placed in normal speed by setting the DBSPD terminal low or by setting the normal mode bits
in the system control register 0 (x02) through the serial control interface. The PWM is placed in double speed
mode by setting the DBSPD terminal high or by setting the double speed bits in the system control register.
Quad-speed mode is auto detected supported in slave mode and invoked using the I2C serial control interface
in master mode. In slave mode, if the TAS5026A is not in double speed mode, quad-speed mode is
automatically detected when MCLK_IN is 128Fs. In master mode, the PWM is placed in quad-speed mode
by setting the quad-speed bit in the system control register through the serial control interface.
If the master clock is well behaved during the frequency transition (the high or low clock periods are not less
than 20 ns), then a simple speed selection is simply performed by setting the DBSPD terminal or the serial
control register.
When the sample rate is changed, the TAS5026A temporarily suspends processing, places the PWM outputs
in a hard mute (PWM P outputs low; PWM M outputs high, and all VALID signals low), resets all internal
processes, and suspends all I2C operations. The TAS5026A then performs a partial re-initialization and
noiselessly restarts the PWM output. The TAS5026A preserves all control register settings throughout this
sequence. If desired, the sample rate change can be performed while mute is active to provide a completely
silent transition. The timing of this control sequence is shown in Section 4.
SLES068A—February 2003—Revised January 2004
TAS5026A
7
Architecture Overview
If the master clock input can encounter a high clock or low clock period of less than 20 ns while the data rates
are changing, then RESET should be applied during this time There are two recommended control procedures
for this case, depending upon whether the DBSPD terminal or the serial control interface is used. These
control sequences are shown in Section 4.
Table 2−1. Normal-Speed, Double-Speed, and Quad-Speed Operation
QUAD-SPEED CONTROL
REGISTER BIT
DBSPD TERMINAL OR
CONTROL REGISTER BIT
MODE
SPEED SELECTION
0
0
Master or slave
Normal speed
0
1
Master or slave
Double speed
1
0
Master or slave
Quad speed
0
0
Slave
Quad speed if MCLK_IN = 128 Fs
1
1
Master or slave
Error
2.1.2 Clock Master/Slave Mode (M_S)
Clock master and slave mode can be invoked using the M_S (master slave) terminal.
This terminal specifies the default mode that is set immediately following a device RESET. The serial data
interface setting permits the clock generation mode to be changed during normal operation.
The transition to master mode occurs:
•
Following a RESET when M_S terminal has a logic high applied
The transition to slave mode occurs:
•
Following a RESET when M_S terminal has a logic low applied
2.1.3 Clock Master Mode
When M_S = 1 following a RESET, the TAS5026A provides the master clock, SCLK, and LRCLK to the rest
of the system. In the master mode, the TAS5026A outputs the audio system clocks MCLK_OUT, SCLK, and
LRCLK.
The TAS5026A device generates these clocks plus its internal clocks from the internal phase-locked loop
(PLL). The reference clock for the PLL can be provided by either an external clock source (attached to
XTAL_IN) or a crystal (connected across terminals XTAL_IN and XTAL_OUT). The external source attached
to MCLK_IN is 256 times (128 in quad mode) the data sample rate (Fs). The SCLK frequency is 64 times the
data sample rate and the SCLK frequency of 48 times the data sample rate is not supported in the master
mode. The LRCLK frequency is the data sample rate.
2.1.3.1
Crystal Type and Circuit
In clock master mode the TAS5026A can derive the MCLKOUT, SCLK, and LRCLK from a crystal. In this case,
the TAS5026A uses a parallel-mode fundamental-mode crystal. This crystal is connected to the TAS5026A
as shown in Figure 2−1.
8
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
TAS5026A
C1
rd
OSC
MACRO
XO
C2
XI
AVSS
rd = Drive level control resistor − crystal vendor specified
CL = Crystal load capacitance (capacitance of circuitry between the two terminals of the crystal)
CL = (C1 x C2 )/(C1 + C2 ) + CS (where CS = board stray capacitance ~ 3 pF)
Example: Vendor recommended CL = 18 pF, CS = 3 pF ≥ C1 = C2 = 2 x (18−3) = 30 pF
Figure 2−1. Crystal Circuit
2.1.4 Clock Slave Mode
In the slave mode (M_S = 0), the master clock, LRCLK, and SCLK are inputs to the TAS5026A. The master
clock is supplied through the MCLK_IN terminal.
As in the master mode, the TAS5026A device develops its internal timing from the internal phase-locked loop
(PLL). The reference clock for the PLL is provided by the input to the MCLK_IN terminal. This input is at a
frequency of 256 times (128 in quad mode) the input data rate. The SCLK frequency is 48 or 64 times the data
sample rate. The LRCLK frequency is the data sample rate. The TAS5026A does not require any specific
phase relationship between SRCLK and MCLK_IN, but there must be synchronization. The TAS5026A
monitors the relationship between MCLK, SCLK and LRCLK. The TAS5026A detects if any of the three clocks
are absent, if the LRCLK rate changes more than 10 MCLK cycles since the last device reset or clock error,
or if the MCLK frequency is changing substantially with respect to the PLL frequency.
When a clock error is detected, the TAS5026A performs a clock error management sequence.
The clock error management sequence temporarily suspends processing, places the PWM outputs in a hard
mute (PWM_P outputs are low; PWM_M outputs are high, and all VALID signals are low), resets all internal
processes, sets the volumes to mute, and suspends all I2C operations.
When the error condition is corrected, the TAS5026A exits the clock error sequence by performing a partial
re-initialization, noiselessly restarting the PWM output, and ramping the volume up to the level specified in
the volume control registers. This sequence is performed over a 60-ms interval. The TAS5026A preserves
all control register settings that were set prior to the clock interruption.
If a clock error occurs while the ERR_RCVRY terminal is asserted (low), the TAS5026A performs the error
management sequence up to the unmute sequence. In this case, the volume remains at full attenuation with
the PWM output at a 50% duty cycle. The volume can be restored from this latched mute state by triggering
a mute/unmute sequence by asserting and releasing MUTE either by using the terminal, the system control
register X01 D4, or the individual channel mute register D5−D0.
Alternatively, the TAS5026A can be prevented from entering the latched mute state following a clock error
when the ERR_RCVRY terminal or the error recovery I2C command (register X03 bit D2) is active by writing
x7F to the individual error recovery register (x04) and a x84 to x1F (a feature enable register).
SLES068A—February 2003—Revised January 2004
TAS5026A
9
Architecture Overview
Table 2−2. Master and Slave Clock Modes
M_S
DBSPD
XTL_IN
(MHz)†
MCLK_IN
(MHz)‡
Internal PLL, master, normal speed
1
0
8.192
-
Internal PLL, master, normal speed
1
0
11.2896
Internal PLL, master, normal speed
1
0
12.288
DESCRIPTION
SCLK
(MHz)k
LRCLK
(kHz)¶
MCLK_OUT
(MHz)#
2.048
32
8.192
-
2.8224
44.1
11.2896
-
3.072
48
12.288
5.6448
88.2
22.5792
6.144
96
24.576
22.5792
Internal PLL, master, double speed
1
1
-
Internal PLL, master, double speed
1
1
-
22.5792§
24.576§
Internal PLL, master, quad speed
1
0
-
22.5792
11.2896
176.4
Internal PLL, master, quad speed
1
0
-
24.576
12.288
192
24.576
Internal PLL, slave, normal speed
0
0
-
2.0484
32
Digital GND
Internal PLL, slave, normal speed
0
0
-
8.192§
11.2896§
2.8224
44.1
Digital GND
Internal PLL, slave, normal speed
0
0
-
12.288§
3.072
48
Digital GND
Internal PLL, slave, double speed
0
1
-
22.5792
5.6448
88.2
Digital GND
Internal PLL, slave, double speed
Internal PLL, slave, quad speed ||
0
1
-
96
Digital GND
0
-
24.576§
22.5792§
6.144
0
11.2896
176
Digital GND
0
0
24.576§
12.288
† A crystal oscillator is connected to XTL_IN.
‡ MCLK_IN tied low when input to XTL_IN is provided; XTL_IN tied low when MCLK_IN_IN is provided.
§ External MCLK_IN connected to MCLK_IN_IN input
¶ SCLK and LRCLK are outputs when M_S = 1, and inputs when M_S = 0.
# MCLK_OUT is driven low when M_S = 0.
|| Quad-speed mode is detected automatically.
k SCLK can be 48 or 64 times Fs
192
Digital GND
Internal PLL, slave, quad speed ||
Table 2−3. LRCLK and MCLK_IN Rates
NORMAL SPEED (kHz)
DOUBLE SPEED (kHz)
QUAD SPEED (kHz)
LRCLK
1 Fs
32
44.1
48
1 Fs
64
88.2
96
1 Fs
176.4
192
MCLK_IN
256 Fs
8,192
11,289.6
12,288
256 Fs
16,384
22,579.2
24,576
128 Fs
22,579.2
24,576
2.1.5 PLL External Filter
A low jitter PLL produces the internal timing of the TAS5026A (when in master mode), the master clock, SCLK,
and LRCLK. Connections for the PLL external filter are provided through PLL_FLT_OUT and PLL_FLT_RET
as shown in Figure 2−2.
PLL_FLT_OUT
220 Ω
4.7 nF
TAS5026A
47 nF
PLL_FLT_RET
Figure 2−2. PLL External Filter
10
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
2.1.6 DCLK
DCLK is the internal high frequency clock that is produced by the PLL circuitry from MCLK. The TAS5026A
uses the DCLK to control all internal operations. DCLK is 8 times the speed of MCLK in normal speed mode,
4 times MCLK in double speed, and 2 times MCLK in quad speed. With respect to the I2C addressable
registers, DCLK clock cycles are used to specify interchannel delay and to detect when the MCLK frequency
is drifting. Table 2−4 DCLK shows the relationship between Sample Rate, MCLK, and DCLK.
Table 2−4. DCLK
Fs
(kHz)
MCLK
(MHz)
DCLK
(MHz)
DCLK Period
(ns)
15.3
32
8.1920
65.5360
44.1
11.2896
90.3168
11.1
48
12.2880
98.3040
10.2
88
22.5280
90.1120
11.1
96
24.5760
98.3040
10.2
192
49.1520
98.3040
10.2
2.1.7 Serial Data Interface
The TAS5026A operates as a slave only/receive only serial data interface in all modes. The TAS5026A has
three PCM serial data interfaces to accept six channels of digital data though the SDIN1, SDIN2, SDIN3 inputs.
The serial audio data is in MSB first; 2s complement format.
The serial data interfaces of the TAS5026A can be configured in right justified, I2S, left-justified, or DSP modes.
This interface supports 32-kHz, 44.1-kHz, 48-kHz, 88-kHz, 96-kHz, 176.4-kHz, and 192-kHz data sample
rates. The serial data interface format is specified using the data interface control register. The supported word
lengths are shown in Table 2−5.
During normal operating conditions if the serial data interface settings change state, an error recovery
sequence is initiated.
Table 2−5. Supported Word Lengths
DATA MODES
WORD
LENGTHS
MOD2
MOD1
MOD0
Right justified, MSB first
16
0
0
0
Right justified, MSB first
20
0
0
1
Right justified, MSB first
I2S
24
0
1
0
16
0
1
1
I2S
I2S
20
1
0
0
24
1
0
1
Left justified, MSB first
24
1
1
0
DSP frame
16
1
1
1
SLES068A—February 2003—Revised January 2004
TAS5026A
11
Architecture Overview
2.1.7.1
I2S Timing
I2S timing uses an LRCLK to define when the data being transmitted is for the left channel and when it is for
the right channel. The LRCLK is low for the left channel and high for the right channel. A bit clock running at
48 or 64 times Fs is used to clock in the data. There is a delay of one bit clock from the time the LRCLK signal
changes state to the first bit of data on the data lines. The data is written MSB first and is valid on the rising
edge of the bit clock. The TAS5026A masks unused trailing data bit positions. Master mode only supports a
64 times Fs bit clock.
2-Channel I2S (Philips Format) Stereo Input
32 Clks
32 Clks
LRCLK (Note Reversed Phase)
Left Channel
Right Channel
SCLK
SCLK
MSB
24-Bit Mode
23 22
LSB
9
8
5
4
5
4
1
0
1
0
1
MSB
0
LSB
23 22
9
8
5
4
19 18
5
4
1
0
15 14
1
0
1
0
20-Bit Mode
19 18
16-Bit Mode
15 14
Figure 2−3. I2S 64-Fs Format
2-Channel I2S Stereo Input/Output (24-Bit Transfer Word Size)
24 Clks
24 Clks
LRCLK
Right Channel
Left Channel
SCLK
SCLK
MSB
24-Bit Mode
LSB
23 22 21 20 19
8
7
5
4
5
4
1
0
1
0
3
2
1
MSB
0
LSB
23 22 21 20 19
8
7
5
4
19 18 17 16 15
5
4
1
0
11
1
0
3
2
1
20-Bit Mode
19 18 17 16 15
16-Bit Mode
15 14 13 12
11
15 14 13 12
Figure 2−4. I2S 48-Fs Format
12
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
2.1.7.2
Left-Justified Timing
Left-justified (LJ) timing uses an LRCLK to define when the data being transmitted is for the left channel and
when it is for the right channel. The LRCLK is high for the left channel and low for the right channel. A bit clock
running at 48 or 64 times Fs is used to clock in the data. The first bit of data appears on the data lines at the
same time the LRCLK toggles. The data is written MSB first and is valid on the rising edge of the bit clock.
The TAS5026A masks unused trailing data bit positions. Master mode only supports a 64 times Fs bit clock.
2-Channel Left-Justified Stereo Input
32 Clks
32 Clks
LRCLK
LRCLK
Right Channel
Left Channel
SCLK
MSB
24-Bit Mode
23 22
LSB
9
8
5
4
1
0
MSB
23 22
LSB
9
8
5
4
1
0
NOTE: All data presented in 2s complement form with MSB first.
Figure 2−5. Left-Justified 64-Fs Format
2-Channel Left-Justified Stereo Input/Output (24-Bit Transfer Word Size)
24 Clks
24 Clks
LRCLK
Right Channel
Left Channel
SCLK
MSB
24-Bit Mode
LSB
23 22 21 20 19
9
8
5
4
3
2
1
0
MSB
23 22 21 20 19
LSB
9
8
5
4
3
2
1
0
Figure 2−6. Left-Justified 48-Fs Format
2.1.7.3
Right-Justified Timing
Right-justified (RJ) timing uses an LRCLK to define when the data being transmitted is for the left channel and
when it is for the right channel. The LRCLK is high for the left channel and low for the right channel. A bit clock
running at 48 or 64 times Fs is used to clock in the data. The first bit of data appears on the data 8-bit clock
periods (for 24-bit data) after LRCLK toggles. In RJ mode, the last bit clock before LRCLK transitions always
clocks the LSB of data. The data is written MSB first and is valid on the rising edge of the bit clock. The
TAS5026A masks unused leading data bit positions. Master mode only supports a 64 times Fs bit clock.
SLES068A—February 2003—Revised January 2004
TAS5026A
13
Architecture Overview
2-Channel Right-Justified (Sony Format) Stereo Input
32 Clks
32 Clks
LRCLK
Right Channel
Left Channel
SCLK
MSB
24-Bit Mode
LSB
23 22
19 18
15 14
1
0
19 18
15 14
1
0
15 14
1
0
MSB
LSB
23 22
19 18
15 14
1
0
19 18
15 14
1
0
15 14
1
0
20-Bit Mode
16-Bit Mode
NOTE: All data presented in 2s complement form with MSB first.
Figure 2−7. Right-Justified 64-Fs Format
2-Channel Right-Justified Stereo Input/Output (24-Bit Transfer Word Size)
24 Clks
24 Clks
LRCLK
Right Channel
Left Channel
SCLK
MSB
24-Bit Mode
LSB
23 22 21 20 19 18
MSB
LSB
15 14
9
8
1
0
23 22 21 20 19 18
15 14
9
8
1
0
15 14
9
8
1
0
19 18
15 14
9
8
1
0
15 14
9
8
1
0
15 14
9
8
1
0
20-Bit Mode
19 18
16-Bit Mode
NOTE: All data presented in 2s complement form with MSB first.
Figure 2−8. Right-Justified 48-Fs Format
14
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
2.1.7.4
DSP Mode Timing
DSP mode timing uses an LRCLK to define when data is to be transmitted for both channels. A bit clock running
at 64 × Fs is used to clock in the data. The first bit of the left channel data appears on the data lines following
the LRCLK transition. The data is written MSB first and is valid on the rising edge of the bit clock. The
TAS5026A masks unused trailing data bit positions.
SCLK
64 SCLKS
LRCLK
MSB
LSB
MSB
LSB
SDIN
16 Bits
Left
Channel
16 Bits
Right
Channel
32 Bits Unused
Figure 2−9. DSP Format
2.2
Reset, Power Down, and Status
The reset, power down, and status circuitry provides the necessary controls to bring the TAS5026A to the initial
inactive condition, achieve low power standby, and report system status.
2.2.1 Reset—RESET
The TAS5026A is placed in the reset mode by setting the RESET terminal low.
RESET is an asynchronous control signal that restores the TAS5026A to its default conditions, sets the valid
1−6 outputs low, and places the PWM in the hard mute state. Volume is immediately set to full attenuation
(there is no ramp down).
As long as the RESET terminal is held low, the device is in the reset state. During reset, all I2C and serial data
bus operations are ignored. Table 2−6 shows the device output signals while RESET is active.
Upon the release of RESET, if POWER_DWN is high, the system performs a 4-ms to 5-ms device initialization
and then ramps the volume up to 0 db using a soft volume update sequence. If MCLK_IN is not active when
RESET is released high, then a 4-ms to 5-ms initialization sequence is produced once MCLK_IN becomes
active.
During device initialization all controls are reset to their initial states. Table 2−7 shows the control settings that
are changed during initialization.
RESET should be applied during power-up initialization or while changing the master slave clock states.
SLES068A—February 2003—Revised January 2004
TAS5026A
15
Architecture Overview
Table 2−6. Device Outputs During Reset
SIGNAL
MODE
SIGNAL STATE
Valid 1−Valid 6
All
Low
PWM P-outputs
All
Low
PWM M-outputs
All
Low
MCLKOUT
All
Low
Master
Low
SCLK
Slave
Signal input
LRCLK
Master
Low
LRCLK
SCLK
Slave
Signal input
SDA
All
Signal input
CLIP
All
High
Because the RESET is an asynchronous control signal, small clicks and pops can be produced during the
application (the leading edge) of this control. However, when RESET is released, the transition from the hard
mute state back to normal operation is performed synchronously using a quiet sequence.
If a completely quiet reset sequence is desired, MUTE should be applied before applying RESET.
Table 2−7. Values Set During Reset
CONTROL
SETTING
Volume
0 dB
MCLK_IN frequency
256
Master/slave mode
M_S terminal state
Automute
Enabled
De-emphasis
None
DC offset
0
Interchannel delay
Each channel is set to a default value
2.2.2 Power Down—PDN
The TAS5026A can be placed into the power-down mode by holding the PDN terminal low. When power-down
mode is entered, both the PLL and the oscillator are shut down. Volume is immediately set to full attenuation
(there is no ramp down). The valid 1−6 outputs are immediately asserted low and the PWM outputs are placed
in the hard mute state. PDN initiates device power down without clock inputs. As long as the PDN terminal
is held low—the device is in the power-down (hard mute) state.
During power down, all I2C and serial data bus operations are ignored. Table 2−8 shows the device output
signals while PDN is active.
Table 2−8. Device Outputs During Power Down
SIGNAL
MODE
SIGNAL STATE
Valid 1−Valid 6
All
Low
PWM P-outputs
All
Low
PWM M-outputs
All
Low
MCLKOUT
All
Low
Master
Low
SCLK
Slave
Signal input
LRCLK
Master
Low
LRCLK
Slave
Signal input
SDA
All
Signal input
CLIP
All
High
SCLK
To place the device in total power-down mode, both RESET and power-down modes must be enabled. Prior
to bringing PDN high, RESET must be brought low for a minimum of 50 ns.
16
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
Because PDN is an asynchronous control signal, small clicks and pops can be produced during the application
(the leading edge) of this control. However, when PDN is released, the transition from the hard mute state back
to normal operation is performed synchronously using a quiet sequence.
If a completely quiet reset sequence is desired, MUTE should be applied before applying PDN.
2.2.2.1
Recovery Time Options
To support the requirements of various system configurations, the TAS5026A can come up to the normal state
after either a long (100 ms) or a short (5 ms) delay.
1. In the first case, a slow system (95 ms to 100 ms) start-up occurs at the end of the power-down sequence
when:
RESET is high for at least 16 MCLK_IN periods before PDN goes high.
2. Otherwise a fast (4 ms to 5 ms) start-up occurs.
NOTE: If MCLK_IN is not active when both of these signals are released high, then a fast
(4 ms to 5 ms) start-up occurs once MCLK_IN becomes active.
2.2.3 General Status Registers
The general status register is a read only register. This register provides an indication when a volume update
is in progress or one of the channels is inactive. The device id can be read using this register.
Volume update is in progress—Whenever a volume change is in progress due to a volume update
command or mute, this status bit is high.
Device identification code—The device identification code, 1 0011, is displayed.
No internal errors (all valid signals are high)—When there are no internal errors in the TAS5026A and all
outputs are valid, this status bit is high.
One or more valid signals are inactive—If low, one or more channels of the TAS5026A are not outputting
data. The Valid signals for those channels are inactive.
This can be produced by one of three causes:
•
•
•
•
•
One or more of the clock signals are in error
Error recover is active (low)
The automute has silenced one or more channels that are receiving 0 inputs
Mute has been set
Volume control has been set to full attenuation
If this signal is high, the TAS5026A is outputting data on all channels.
2.2.4 Error Status Register
The error status register indicates historical information on control signal changes and clock errors. This
register latches these indications when they occur. The indications are cleared by writing a 00(Hex) to the
register.
This register is intended as a diagnostic tool to be used only when the system is not operating correctly. This
is because the error status bits are set when the data rate, serial data interface format, or master/slave mode
is changed. As a result, this register indicates an error condition even though the system is operating normally.
This register should only be used while diagnosing transient error conditions.
Any clock error or control signal terminal change which occurs since the last time the error status register was
cleared is displayed. In using this register, the first step is to initialize the device and verify that all of the clock
signals are active. Then this register should be cleared by writing a 00(Hex). At this point, the register indicates
any errors or control signal changes.
SLES068A—February 2003—Revised January 2004
TAS5026A
17
Architecture Overview
This register indicates an error condition by a high for the following conditions:
•
•
•
•
•
•
•
FS ERROR
A control terminal change has occurred (M_S, DBLSPD)
LRCLK error
MCLK_IN count error
DCLK phase error with respect to MCLK_IN
MCLK_IN phase error with respect to DCLK
PWM timing error
If all bits of the register are low, no errors have occurred and no control terminals changed.
There is no one-to-one correspondence of clock error indication to a system error condition. A particular
system error can be indicated by one or more error indications in this register. The system error conditions
and the reported errors are as follows:
There is no correct number of MCLKs per LRCLK:
•
•
•
FS error has occurred
LRCLK error
MCLK_IN count error
LRCLK is absent:
•
LRCLK error
MCLK is the wrong frequency, changing frequency, or absent:
•
•
•
DCLK phase error with respect to MCLK
MCLK phase error with respect to DCLK
PWM timing error
SCLK is the wrong frequency or absent:
•
2.3
SCLK error
Signal Processing
This section contains the signal processing functions that are contained in the TAS5026A. The signal
processing is performed using a high-speed 24-bit signal processing architecture. The TAS5026A performs
the following signal processing features:
• Individual channel soft volume with a range of 24 dB to −114 dB plus mute
• Soft mute
• Automute
• 50-µs/15-µs de-emphasis filter supported in the sampling rates 32 kHz, 44.1 kHz, and 48 kHz
2.3.1 Volume Control
The gain of each output can be adjusted by a soft digital volume control for each channel. Volume adjustments
are performed using a soft gain update s-curve, which is approximated using a second order filter fit. The curve
fit is performed over a transition interval between 41 ms and 65 ms.
The volume of each channel can be adjusted from mute to −114 dB to 24 dB in 0.5 dB steps. Because of the
numerical representation that is used to control the volume, at very low volume levels the step size increases
for gains that are less than −96 dB. The default volume setting following power up or reset is 0 dB for all
channels. The step size adjustment is linear down to approximately −90 dB, see see Figure 2−10.
18
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
STEP SIZE
vs
ATTENUATION (GAIN)
6.0
5.5
5.0
4.5
Step Size − dB
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
−110
−100
−90
−80
−70
−60
−50
−40
−30
−20
−10
0
10
20
Attenuation (Gain) − dB
Figure 2−10. Attenuation Curve
The volume control format for each channel is expressed in 8 bits. The volume for each channel is set by writing
8 bits via the serial control interface. The MSB bit is written first as in the bit position 0 (LSB position).
The volume for each channel can be set using a single or multiple address write operation to the volume control
register via the serial control interface. Changing the volume of all six channels requires that 6 registers be
updated.
To coordinate the volume adjustment of multiple channels simultaneously, the TAS5026A performs a delayed
volume update upon receiving a volume change command. Following the completion of the register volume
write operations, the TAS5026A waits for 5 ms for another volume command to be given. If no volume
command is issued in that period of time, the TAS5026A starts adjusting the volume of the channels that
received volume settings.
While a volume update is being performed, the system status register indicates that the update is in progress.
During the update, all subsequent volume control setting requests that are sent to the TAS5026A are received
and stored as a single next value for a subsequent update. If more than one volume setting request is sent,
only the last is retained.
Table 2−9. Volume Register
VOLUME REGISTER
D7
D6
D5
D4
D3
D2
D1
D0
Vol
Bit 7
Vol
Bit 6
Vol
Bit 5
Vol
Bit 4
Vol
Bit 3
Vol
Bit 2
Vol
Bit 1
Vol
Bit 0
2.3.2 Mute
The application of mute ramps the volume from any setting to noiseless hard mute state. There are two
methods in which the TAS5026A can be placed into mute. The TAS5026A is placed in the noiseless mute when
the MUTE terminal is asserted low for a minimum of 3 MCLK_IN cycles. Alternatively, the mute mode can be
initiated by setting the mute bit in the system control register through the serial control interface. The
TAS5026A is held in mute state as long as the terminal is low or I2C mute setting is active. This command uses
quiet entry and exit sequences to and from the hard mute state.
SLES068A—February 2003—Revised January 2004
TAS5026A
19
Architecture Overview
If an error recovery (described in the PWM section) occurs after a mute request has been received, the device
returns from error recovery with the channel volume set as specified by the mute command.
2.3.3 Automute
Automute is an automatic sequence that can be enabled or disabled via the serial control interface. The default
for this control is enabled. When enabled, the PWM automutes an individual channel when a channel receives
from 5 ms to 50 ms of consecutive zeros. This time interval can be selectable using the automute delay
register. The default interval is 5 ms at 48 kHz. This duration is independent of the sample rate. The automute
state is exited when two consecutive samples of nonzero data are received. The TAS5026A exit from
automute is performed quickly and preserves all music information.
This mode uses the valid low to provide a low-noise floor while maintaining a short start-up time. Noise free
entry and exit is achieved by using the PWM quiet start and stop sequences.
2.3.4 Individual Channel Mute
Individual channel mute is invoked through the serial interface. Individual channel mute permits each channel
of the TAS5026A to be individually muted and unmuted. The operation that is performed is identical to the mute
operation; however, it is performed on a per channel basis. A TAS5026A channel is held in the mute state as
long as the serial interface mute setting for that channel is set.
2.3.5 De-Emphasis Filter
For audio sources that have been pre-emphasized, a precision 50-µs/15-µs de-emphasis filter is provided to
support the sampling rates of 32 kHz, 44.1 kHz, and 48 kHz. See Figure 2−11 for a graph showing the
de-emphasis filtering characteristics. De-emphasis is set using two bits in the system control register.
Table 2−10. De-Emphasis Filter Characteristics
DEM_SEL2 (MSB)
DEM_SEL1
DESCRIPTION
0
0
De-emphasis disabled
0
1
De-emphasis enabled for Fs = 48 kHz
1
0
De-emphasis enabled for Fs = 44 kHz
1
1
De-emphasis enabled for Fs = 32 kHz
Response − dB
Following the change of state of the de-emphasis bits, the PWM outputs go into the soft mute state. After 128
LRCLK periods for initialization, the PWM outputs are driven to the normal (unmuted) mode.
0
De-Emphasis
−10
3.18 (50 µs)
10.6 (15 µs)
f − Frequency − kHz
Figure 2−11. De-Emphasis Filter Characteristics
2.4
Pulse-Width Modulator (PWM)
The TAS5026A contains six channels of high performance digital Equibit PWM modulators that are designed
to drive switching output stages (back ends) in both single-ended (SE) and H-bridge (bridge tied load)
configuration. The TAS5026A device uses noise shaping and sophisticated error correction algorithms to
achieve high power efficiency and high-performance digital audio reproduction.
The PWM provides six pseudo-differential outputs to drive six monolithic power stages (such as TAS5110)
or six discrete differential power stages using of gate drivers (such as the TAS5182) and MOSFETs in
single-ended or bridged configurations. The TAS5026A also provides a high performance differential output
that can be used to drive an external analog headphone amplifier.
20
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
2.4.1 Clipping Indicator
The clipping output is designed to indicate clipping. When any of the six PWM outputs exceeds the maximum
allowable amplitude, the clipping indicator is asserted. The clipping indicator is cleared every 10 ms.
2.4.2 Error Recovery
Error recovery is used to provide error management and to permit the PWM output to be reset while preserving
all intervolume, interchannel delay, dc offsets, and the other internal settings. Error recovery is initiated by
bringing the ERR_RCVRY terminal low for a minimum 5 MCLK_IN cycles or by setting the error recovery bit
in control register 1. Error recovery is a level sensitive signal.
The device also performs an error recovery automatically:
•
When the speed configuration is changed to normal, double, or quad speed
•
Following a change in the serial data bus interface configuration
When ERR_RCVRY is brought low, all valid signals go low, and the PWM-P and PWM-M outputs go low. If
there are any pending speed configurations, these changes are then performed. When ERR_RCVRY is
brought high, a delay of 4 ms to 5 ms is performed before the system starts the output re-initialization
sequence. After the initialization time, the TAS5026A begins normal operation. During error recovery, all
controls and device settings that were not updated are maintained in their current configurations.
To permit error recovery to be used to provide TAS5100 error management and recovery, the delay between
the start of (falling edge) error recovery and the falling edge of valid 1 though valid 6 is selectable. This delay
can be selected to be either 6 µs or 47 µs.
During error recovery all serial data bus operations are ignored. At the conclusion of the sequence, the error
recovery register bit is returned to normal operation state. Table 2−11 shows the device output signal states
while during error recovery.
Table 2−11. Device Outputs During Error Recovery
SIGNAL
MODE
SIGNAL STATE
Valid 1−Valid 6
All
Low
PWM P-outputs
All
Low
PWM M-outputs
All
Low
MCLKOUT
All
Low
Master
Low
SCLK
Slave
Signal input
LRCLK
Master
Low
LRCLK
SCLK
Slave
Signal input
SDA
All
Signal input
CLIP
All
High
The transitions are done using a quiet entrance and exit sequence to prevent pops and clicks.
2.4.3 Individual Channel Error Recovery
Individual channel error recovery is used to provide error management and to permit the PWM output to be
turned off. Error recovery is initiated by setting one or more of the six error recovery bits in the error recovery
register to low.
While the error recover bits are brought low, the valid signals go to the low state. When the error recovery bits
are brought high, a delay of 4 ms to 5 ms occurs before the channels are returned to normal operation.
The delay between the falling edge of the error recover bit and the falling edge of valid 1 though valid 6 is
selectable. This delay can be selected to be either 6 µs or 47 µs.
The TAS5026A controls the relative timing of the pseudo-differential drive control signals plus the valid signal
to minimize the production of system noise during error recovery operations. The transitions to valid low and
valid high are done using an almost quiet entrance and exit sequence to prevent pops and clicks.
SLES068A—February 2003—Revised January 2004
TAS5026A
21
Architecture Overview
2.4.4 PWM DC-Offset Correction
An 8-bit value can be programmed to each of the six PWM offset correction registers to correct for any offset
present in the output stages. The offset correction is divided into 256 intervals with a total offset correction of
±1.56% of full scale. The default value is zero correction represented by 00 (hex). These values can be
changed at any time through the serial control interface.
2.4.5 Interchannel Delay
An 8-bit value can be programmed to each of the six PWM interchannel delay registers to add a delay per
channel from 0 to 255 clock cycles. The delays correspond to cycles of the high-speed internal clock, DCLK.
Each subsequent channel has a default value that is N DCLKs larger than the preceding channel. The default
values are 0 for the first channel and 76 for each successive channel.
These values can be updated upon power up through the serial control interface. This delay is generated in
the PWM block with the appropriate control signals generated in the CTL block.
These values can be changed at any time through the serial control interface.
NOTE:
The performance of a PurePath Digital amplifier system is optimized by setting the PWM
timing based upon the type of back-end device that is used and the layout. These values are
set during initialization using the I2C serial interface.
2.4.6 PWM/H-Bridge and Discrete H-Bridge Driver Interface
The TAS5026A provides six PWM outputs, which are designed to drive switching output stages (back-ends)
in both single-ended (SE) and H-bridge (bridge tied load) configuration. The back-ends may be monolithic
power stages (such as the TAS5110) or six discrete differential power stages using gate drivers (such as the
the TAS55182) and MOSFETs in single-ended or bridged configurations.
The TAS5110 device is optimized for bridge tied load (BTL) configurations. These devices require a pure
differential PWM signal with a third signal (VALID) to control the MUTE state. In the MUTE state, the TAS5110
OUTA and OUTB are both low.
One Channel
of TAS5026A
TAS5110
PWM_AP
AP
PWM_AM
AM
VALID
OUTA
Speaker
RESET
BP
BM
OUTB
Figure 2−12. PWM Outputs and H-Bridge Driven in BTL Configuration
2.5
I2C Serial Control Interface
MCLK must be active for the TAS5026A to support I2C bus transactions. The TAS5026A has a bidirectional
serial control interface that is compatible with the I2C (Inter IC) bus protocol and supports both 100 KBPS and
400 kbps data transfer rates for single and multiple byte write and read operations. This is a slave only device
that does not support a multi-master bus environment or wait state insertion. The control interface is used to
program the registers of the device and to read device status.
The TAS5026A supports the standard-mode I2C bus operation (100 kHz maximum) and the fast I2C bus
operation (400 kHz maximum). The TAS5026A performs all I2C operations without I2C wait cycles.
PurePath Digital is a trademark of Texas Instruments.
22
TAS5026A
SLES068A—February 2003—Revised January 2004
Architecture Overview
The I2C bus employs two signals; SDA (data) and SCL (clock), to communicate between integrated circuits
in a system. Data is transferred on the bus serially one bit at a time. The address and data are transferred in
byte (8 bit) format with the most significant bit (MSB) transferred first. In addition, each byte transferred on the
bus is acknowledged by the receiving device with an acknowledge bit. Each transfer operation begins with
the master device driving a start condition on the bus and ends with the master device driving a stop condition
on the bus. The bus uses transitions on the data terminal (SDA) while the clock is high to indicate start and
stop conditions. A high-to-low transition on SDA indicates a start, and a low-to-high transition indicates a stop.
Normal data bit transitions must occur within the low time of the clock period. These conditions are shown in
Figure 2−13. The master generates the 7-bit slave address and the read/write (R/W) bit to open
communication with another device and then waits for an acknowledge condition. The TAS5026A holds SDA
low during acknowledge clock period to indicate an acknowledgement. When this occurs, the master transmits
the next byte of the sequence. Each device is addressed by a unique 7-bit slave address plus R/W bit (1 byte).
All compatible devices share the same signals via a bidirectional bus using a wired-AND connection. I2C An
external pullup resistor must be used for the SDA and SCL signals to set the high level for the bus.
SDA
R/
A 8 Bit Register Address (N)
W
7 Bit Slave Address
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
8 Bit Register Data For
Address (N)
A
7
6
5
4
3
2
1
8 Bit Register Data For
Address (N)
A
0
7
6
5
4
3
2
1
A
0
SCL
Start
Stop
Figure 2−13. Typical I2C Sequence
There are no limits on the number of bytes that can be transmitted between start and stop conditions. When
the last word transfers, the master generates a stop condition to release the bus. A generic data transfer
sequence is also shown in Figure 2−13.
The 7-bit address for the TAS5026A is 001101X, where X is a programmable address bit. Using the CS0
terminal on the device, the LSB address bit is programmable to permit two devices to be used in a system.
These two addresses are licensed I2C addresses and do not conflict with other licensed I2C audio devices.
To communicate with the TAS5026A, the I2C master uses 0011010 if CS0 = 0 and 0011011 if CS0 = 1. In
addition to the 7-bit device address, an 8-bit register address is used to direct communication to the proper
register location within the device interface.
Read and write operations to the TAS5026A can be done using single byte or multiple byte data transfers.
2.5.1 Single-Byte Write
As shown in Figure 2−14, a single byte data write transfer begins with the master device transmitting a start
condition followed by the I2C device address and the read/write bit. The read/write bit determines the direction
of the data transfer. For a write data transfer, the read/write bit is 0. After receiving the correct I2C device
address and the read/write bit, the TAS5026A device responds with an acknowledge bit. Next, the master
transmits the address byte or bytes corresponding to the TAS5026A internal memory address being
accessed. After receiving the address byte, the TAS5026A again responds with an acknowledge bit. Next, the
master device transmits the data byte to be written to the memory address being accessed. After receiving
the data byte, the TAS5026A again responds with an acknowledge bit. Finally, the master device transmits
a stop condition to complete the single byte data write transfer.
SLES068A—February 2003—Revised January 2004
TAS5026A
23
Architecture Overview
Start
Condition
Acknowledge
A6
A5
A4
A3
A2
A1
Acknowledge
A0 R/W ACK A7
A6
A5
I2C Device Address and
Read/Write Bit
A4
A3
A2
A1
Acknowledge
A0 ACK D7
D6
D5
Register Address
D4
D3
D2
D1
D0 ACK
Stop
Condition
Data Byte
Figure 2−14. Single-Byte Write Transfer
2.5.2 Multiple-Byte Write
A multiple byte data write transfer is identical to a single byte data write transfer except that multiple data bytes
are transmitted by the master device to TAS5026A as shown in Figure 2−15. After receiving each data byte,
the TAS5026A responds with an acknowledge bit.
Start
Condition
Acknowledge
A6
A5
A1
Acknowledge
A0 R/W ACK A7
A6
I2C Device Address and
Read/Write Bit
A5
A4
A3
A1
A0 ACK D7
Register Address
Acknowledge
Acknowledge
D6
D1
D0 ACK
D7
Other
Data Bytes
First Data Byte
D6
D1
D0 ACK
Stop
Condition
Last Data Byte
Figure 2−15. Multiple-Byte Write Transfer
2.5.3 Single-Byte Read
As shown in Figure 2−16, a single byte data read transfer begins with the master device transmitting a start
condition followed by the I2C device address and the read/write bit. For the data read transfer, a write followed
by a read are actually done. Initially, a write is done to transfer the address byte or bytes of the internal memory
address to be read. As a result, the read/write bit is 0. After receiving the TAS5026A address and the read/write
bit, the TAS5026A responds with an acknowledge bit. Also, after sending the internal memory address byte
or bytes, the master device transmits another start condition followed by the TAS5026A address and the
read/write bit again. This time the read/write bit is a 1 indicating a read transfer. After receiving the TAS5026A
and the read/write bit, the TAS5026A again responds with an acknowledge bit. Next, the TAS5026A transmits
the data byte from the memory address being read. After receiving the data byte, the master device transmits
a not acknowledge followed by a stop condition to complete the single byte data read transfer.
Repeat Start Condition
Start
Condition
Acknowledge
A6
A5
A1
A0 R/W ACK A7
I2C Device Address and
Read/Write Bit
Acknowledge
A6
A5
A4
A0 ACK
A6
A5
A1
A0 R/W ACK D7
I2C Device Address and
Read/Write Bit
Register Address
Not
Acknowledge
Acknowledge
D6
D1
D0 ACK
Data Byte
Stop
Condition
Figure 2−16. Single-Byte Read
2.5.4 Multiple-Byte Read
A multiple byte data read transfer is identical to a single byte data read transfer except that multiple data bytes
are transmitted by the TAS5026A to the master device as shown in Figure 2−17. Except for the last data byte,
the master device responds with an acknowledge bit after receiving each data byte.
Repeat Start Condition
Start
Condition
Acknowledge
A6
A0 R/W ACK A7
I2C Device Address and
Read/Write Bit
Acknowledge
A6
A5
A4
A0 ACK
Register Address
Acknowledge
A6
A0 R/W ACK D7
I2C Device Address and
Read/Write Bit
Not
Acknowledge
Acknowledge
D0
First Data Byte
ACK
D7
Other
Data Bytes
D6
D1
Last Data Byte
D0 ACK
Stop
Condition
Figure 2−17. Multiple-Byte Read
24
TAS5026A
SLES068A—February 2003—Revised January 2004
Serial Control Interface Register Definitions
3
Serial Control Interface Register Definitions
Table 3−1 shows the register map for the TAS5026A. Default values in this section are in bold.
Table 3−1. I2C Register Map
ADDR HEX
DESCRIPTION
00
General status register
01
Error status register
02
System control register 0
03
System control register 1
04
Error recovery register
05
Automute delay
06
DC-offset control register channel 1
07
DC-offset control register channel 2
08
DC-offset control register channel 3
09
DC-offset control register channel 4
0A
DC-offset control register channel 5
0B
DC-offset control register channel 6
0C
Interchannel delay register channel 1
0D
Interchannel delay register channel 2
0E
Interchannel delay register channel 3
0F
Interchannel delay register channel 4
10
Interchannel delay register channel 5
11
Interchannel delay register channel 6
12
Reserved
13
Volume control register channel 1
14
Volume control register channel 2
15
Volume control register channel 3
16
Volume control register channel 4
17
Volume control register channel 5
18
Volume control register channel 6
19
Individual channel mute
The volume table is contained in Appendix A.
Default values are shown in bold in the following tables.
SLES068A—February 2003—Revised January 2004
TAS5026A
25
Serial Control Interface Register Definitions
3.1
General Status Register (0x00)
Table 3−2. General Status Register (Read Only)
D7
D6
D5
D4
D3
D2
D1
D0
0
-
-
-
-
-
-
-
No volume update is in progress.
FUNCTION
1
-
-
-
-
-
-
-
Volume update is in progress.
-
0
-
-
-
-
-
-
Always 0
-
-
1
0
0
1
1
-
Device identification code
-
-
-
-
-
-
-
0
Any valid signal is inactive (see status register (0x03)) (see Note 1).
-
-
-
-
-
-
-
1
No internal errors (all valid signals are high)
NOTE 1: This bit is reset automatically when one or more channels are active.
3.2
Error Status Register (0x01)
Table 3−3. Error Status Register
D7
D6
D5
D4
D3
D2
D1
D0
1
-
-
-
-
-
-
-
FS error has occurred
FUNCTION
-
1
-
-
-
-
-
-
Control pin change has occurred
-
-
-
1
-
-
-
-
LRCLK error
-
-
-
-
1
-
-
-
MCLK_IN count error
-
-
-
-
-
1
-
-
DCLK phase error with respect to MCLK_IN
-
-
-
-
-
-
1
-
MCLK_IN phase error with respect to DCLK
-
-
-
-
-
-
-
1
PWM timing error
0
0
0
0
0
0
0
0
No errors—no control pins changed
NOTE 2: Write 00 hex to clear error indications in error status register.
3.3
System Control Register 0 (0x02)
Table 3−4. System Control Register 0
D7
D6
D5
D4
D3
D2
D1
D0
0
0
-
-
-
-
-
-
Normal mode (in slave mode—quad speed detected if MCLK_IN = 128 Fs)
0
1
-
-
-
-
-
-
Double speed
1
0
-
-
-
-
-
-
Quad speed
1
1
-
-
-
-
-
-
Illegal
-
-
0
-
-
-
-
-
Use de-emphasis pin controls
-
-
1
-
-
-
-
-
Use de-emphasis I2C controls
-
-
-
0
0
-
-
-
No de-emphasis
-
-
-
0
1
-
-
-
De-emphasis for Fs = 32 kHz
-
-
-
1
0
-
-
-
De-emphasis for Fs = 44.1 kHz
-
-
-
1
1
-
-
-
De-emphasis for Fs = 48 kHz
-
-
-
-
-
0
0
0
16 bit, MSB first; right justified
-
-
-
-
-
0
0
1
20 bit, MSB first; right justified
-
-
-
-
-
0
1
0
-
-
-
-
-
0
1
1
24 bit, MSB first; right justified
16-bit I2S
-
-
-
-
-
1
0
0
-
-
-
-
-
1
0
1
20-bit I2S
24-bit I2S
-
-
-
-
-
1
1
0
16-bit MSB first
-
-
-
-
-
1
1
1
16-bit DSP Frame
26
TAS5026A
FUNCTION
SLES068A—February 2003—Revised January 2004
Serial Control Interface Register Definitions
3.4
System Control Register 1 (0x03)
Table 3−5. System Control Register 1
D7
D6
D5
D4
D3
D2
D1
D0
0
-
-
-
-
-
-
-
Reserved
-
0
-
-
-
-
-
-
Valid remains high during automute.
-
1
-
-
-
-
-
-
Valid goes low during automute.
-
-
0
-
-
-
-
-
Valid remains high during mute.
-
-
1
-
-
-
-
-
Valid goes low during mute.
-
-
-
0
-
-
-
-
Mute
-
-
-
1
-
-
-
-
Normal mode
-
-
-
-
0
-
-
-
Set error recovery delay at 6 µs
-
-
-
-
1
-
-
-
Set error recovery delay at 47 µs
-
-
-
-
-
0
-
-
Error recovery (forces error recovery initialization sequence)
-
-
-
-
-
1
-
-
Normal mode
-
-
-
-
-
-
0
-
Automute disabled
-
-
-
-
-
-
1
-
Automute enabled
-
-
-
-
-
-
-
1
Reserved
3.5
FUNCTION
Error Recovery Register (0x04)
Table 3−6. Error Recovery Register
D7
D6
D5
D4
D3
D2
D1
D0
1
1
−
−
−
−
−
−
Set to 11 under default conditions and when x00 is written into 0x1F
FUNCTION
0
−
−
−
−
−
−
−
if 0x84 is written into 0x1F –
Enable volume ramp up after an error recovery sequence initiated by the
ERR_RCVRY terminal or the I2C error recovery command (register 0x03 bit D2).
1
−
−
−
−
−
−
−
if 0x84 is written into 0x1F –
Disable volume ramp up after an error recovery sequence initiated by the
ERR_RCVRY terminal or the I2C error recovery command (register 0x03 bit D2)
−
0
−
−
−
−
−
−
if 0x84 is written into 0x1F –
Enable volume ramp up after error recovery sequence initiated by register bits
D5–D0 of this register.
−
1
−
−
−
−
−
−
if 0x84 is written into 0x1F –
Enable volume ramp up after error recovery sequence initiated by register bits
D5–D0 of this register.
−
−
0
−
−
−
−
−
Put channel 6 into error recovery mode
−
−
−
0
−
−
−
−
Put channel 5 into error recovery mode
−
−
−
−
0
−
−
−
Put channel 4 into error recovery mode
−
−
−
−
−
0
−
−
Put channel 3 into error recovery mode
−
−
−
−
−
−
0
−
Put channel 2 into error recovery mode
−
−
−
−
−
−
−
0
Put channel 1 into error recovery mode
−
−
1
1
1
1
1
1
Normal operation
SLES068A—February 2003—Revised January 2004
TAS5026A
27
Serial Control Interface Register Definitions
3.6
Automute Delay Register (0x05)
Table 3−7. Automute Delay Register
D7
D6
D5
D4
0
0
0
0
-
-
-
-
Reserved
-
-
-
-
0
0
0
0
Set automute delay at 5 ms
-
-
-
-
0
0
0
1
Set automute delay at 10 ms
-
-
-
-
0
0
1
0
Set automute delay at 15 ms
-
-
-
-
0
0
1
1
Set automute delay at 20 ms
-
-
-
-
0
1
0
0
Set automute delay at 25 ms
-
-
-
-
0
1
0
1
Set automute delay at 30 ms
-
-
-
-
0
1
1
0
Set automute delay at 35 ms
-
-
-
-
0
1
1
1
Set automute delay at 40 ms
-
-
-
-
1
-
-
0
Set automute delay at 45 ms
-
-
-
-
1
-
-
1
Set automute delay at 50 ms
3.7
D3
D2
D1
D0
FUNCTION
DC-Offset Control Registers (0x06−0x0B)
Channels 1, 2, 3, 4, 5, and 6 are mapped into (0x06, 0x07, 0x08, 0x09, 0x0A, and 0x0B).
Table 3−8. DC-Offset Control Registers
D7
D6
D5
D4
D3
D2
D1
D0
1
0
0
0
0
0
0
0
Maximum correction for positive dc offset (–1.56% FS)
0
0
0
0
0
0
0
0
No dc-offset correction
0
1
1
1
1
1
1
1
Maximum correction for negative dc offset (1.56% FS)
3.8
FUNCTION
Interchannel Delay Registers (0x0C−0x11)
Channels 1, 2, 3, 4, 5, and 6 are mapped into (0x0C, 0x0D, 0x0E, 0x0F, 0x10, and 0x11).
The first channel delay is set at 0. Each subsequent channel has a default value that is 76 DCLKs larger than
the preceding channel.
Table 3−9. Six Interchannel Delay Registers
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
0
0
0
0
0
Minimum absolute delay, 0 DCLK cycles, default for channel 1
0
1
0
0
1
1
0
0
Default for channel 2
1
0
0
1
1
0
0
0
Default for channel 3
1
1
1
0
0
1
0
0
Default for channel 4
0
0
1
1
0
0
0
0
Default for channel 5
0
1
1
1
1
1
0
0
Default for channel 6
1
1
1
1
1
1
1
1
Maximum absolute delay, 255 DCLK cycles
28
TAS5026A
FUNCTION
SLES068A—February 2003—Revised January 2004
Serial Control Interface Register Definitions
3.9
Individual Channel Mute Register (0x19)
Table 3−10. Individual Channel Mute Register
D7
D6
D5
D4
D3
D2
D1
1
1
-
-
-
-
-
-
Reserved
-
-
1
1
1
1
1
1
No channels are muted
-
-
-
-
-
-
-
0
Mute channel 1
-
-
-
-
-
-
0
-
Mute channel 2
-
-
-
-
-
0
-
-
Mute channel 3
-
-
-
-
0
-
-
-
Mute channel 4
-
-
-
0
-
-
-
-
Mute channel 5
-
-
0
-
-
-
-
-
Mute channel 6
SLES068A—February 2003—Revised January 2004
D0
FUNCTION
TAS5026A
29
Serial Control Interface Register Definitions
30
TAS5026A
SLES068A—February 2003—Revised January 2004
System Procedures for Initialization, Changing Data Rates, and Switching Between Master and Slave Modes
4
System Procedures for Initialization, Changing Data Rates, and
Switching Between Master and Slave Modes
4.1
System Initialization
Reset is used during system initialization to hold the TAS5026A inactive while power (VDD), the master clock
(MCLK_IN), the device control, and the data signals become stable. The recommended initialization
sequence is to hold RESET low for 24 MCLK_IN cycles after VDD has reached 3 V and the other control
signals (MUTE, PDN, M_S, ERR_RCVRY, DBSPD, and CS0) are stable.
Figure 4−1 shows the recommended sequence and timing for the RESET terminal relative to system VDD
voltage and MCLK.
3V
VDD
RESET
24 MCLK_IN Cycles
MCLK
Figure 4−1. RESET During System Initialization
Within the first 2 ms following the low to high transition of the RESET terminal, the serial data interface format
should be set in the serial data interface control register using the I2C serial control interface. If the data rate
setting is other than the setting specified by the DBSPD terminal, then the data rate should be set using the
DBSPD terminal or I2C interface within 2 ms, following the low to high transition of the RESET terminal.
The time available to set the I2C registers following the low to high transition of the RESET terminal can be
extended using the ERR_RCVRY terminal. While ERR_RCVRY is low, the TAS5026A outputs are held
inactive. Once the I2C control registers are set, the ERR_RCVRY terminal can be released and the TAS5026A
starts operation. Figure 4−2 shows how ERR_RCVRY terminal can be used to extend the interval as long as
necessary to set the I2C registers following the low-to-high transition of the RESET terminal.
SLES068A—February 2003—Revised January 2004
TAS5026A
31
System Procedures for Initialization, Changing Data Rates, and Switching Between Master and Slave Modes
MCLK
RESET
< 2 ms
ERR_RCVRY
ERR_RCVRY and MUTE can
be set at any time prior to 2 ms
following the low-to-high
transition of RESET
> 5 ms
Volume ramp
up 120 ms
MUTE
Wait a minimum of 100 µs
after the low-to-high
transition of RESET
Set serial interface format, data
rate, volume, ... via I2C
Release ERR_RCVRY and
then MUTE when I2C
registers are programmed
Figure 4−2. Extending the I2C Write Interval Following Low-to-High Transition of RESET Terminal
The operation of the TAS5026A can be tailored as desired to meet specific operating requirements by
adjusting the following:
•
•
•
•
•
•
Volume
Data sample rate
Emphasis/deemphasis settings
Individual channel mute
Automute delay register
DC-offset control registers
If desired, the TAS5026A can be set to perform an unmute sequence following the low-to-high transition of
the ERR_RCVRY terminal or the error recovery I2C command (register X03 bit D2). This capability is set by
writing x7F to the individual error recovery register (x04) and an x84 to x1F (a feature enable register).
4.2
Data Sample Rate
If the master clock is well-behaved during the frequency transition (no MCLK_IN high or low clock periods less
than 20 ns), then a simple speed selection is performed by setting the DBSPD terminal or the serial control
register. If it is known at least 60 ms in advance that the sample rate changes, mute can be used to provide
a completely silent transition. The timing of this control sequence is shown in Figure 4−3 and Figure 4−4.
32
TAS5026A
SLES068A—February 2003—Revised January 2004
System Procedures for Initialization, Changing Data Rates, and Switching Between Master and Slave Modes
Clock Transition
Change from a 96-kHz data rate
MCLK_IN = 24.576 MHz
Change to a 48-kHz data rate
MCLK_IN = 12.288 MHz
MCLK
> 5 ms
MUTE
Terminal
Volume Ramp
Down 42 − 65 ms
Volume Ramp
Up 42 − 65 ms
DBSPD
Terminal
Set within 2 ms
of transition
< 2 ms
< 2 ms
Figure 4−3. Changing the Data Sample Rate Using the DBSPD Terminal
Clock Transition
Change from a 96-kHz data rate
MCLK_IN = 24.576 MHz
Change to a 48-kHz data rate
MCLK_IN = 12.288 MHz
MCLK
> 5 ms
MUTE
Terminal
Volume Ramp
Down 42 − 65 ms
Volume Ramp
Up 42 − 65 ms
< 2 ms
< 2 ms
Set data rate via I2C
register 0x02, D7 and D6
ERR_RCVRY
Terminal
Hold ERR_RCVRY low
to give additional timeset registers
Figure 4−4. Changing the Data Sample Rate Using the I2C
However, if the master clock input can encounter a high clock or low clock period of less than 20 ns, then
RESET should be applied during this time. There are two recommended control procedures for this case,
depending upon whether the DBSPD terminal or the serial control interface is used. These control sequences
are shown in Figure 4−5 and Figure 4−6.
Because this sequence employs the RESET terminal, the internal register settings are set to the default
values.
SLES068A—February 2003—Revised January 2004
TAS5026A
33
System Procedures for Initialization, Changing Data Rates, and Switching Between Master and Slave Modes
Figure 4−5 shows the procedure to change the data rate using the DBSPD terminal and then to restore the
register settings. In this example, the ERR_RCVRY terminal is used to hold off system re-initialization after
RESET is released. This permits the system controller to have as much additional time as necessary to restore
the register settings.
Once the data rate is set, the ERR_RCVRY and MUTE terminal signals are set high and the system
re-initializes.
Clock unstable during transition.
HIGH and LOW intervals < 20 ns
Change from a 96-kHz data rate
MCLK_IN = 24.576 MHz
Change to a 48-kHz data rate
MCLK_IN = 12.288 MHz
MCLK
> 5 ms
MUTE
Terminal
Volume Ramp
Down 60 ms
Volume Ramp
Up 120 ms
RESET
Terminal
DBSPD
Terminal
Wait a minimum of
100 µs to set DBSPD
< 2 ms
ERR_RCVRY
Terminal
Release ERR_RCVRY and
then MUTE when I2C
registers are programmed
ERR_RCVRY can be set at
any time within this interval
Wait a minimum of 100 µs after the
LOW to HIGH transition of RESET
Restore register
settings via I2C
Figure 4−5. Changing the Data Sample Rate With an Unstable MCLK_IN Using the DBSPD Terminal
Because this sequence employs the RESET terminal, the internal register settings are set to the default
values.
Figure 4−5 shows the procedure to change the data rate using register 0x02 bits D7 and D6 and then to restore
the other register settings. In this example, the ERR_RCVRY terminal is used to hold off system re-initialization
after RESET is released. This permits the system controller to have as much additional time as necessary to
restore the register settings.
Once the data rate is set, the ERR_RCVRY and MUTE terminal signals are set high and the system
re-initializes.
34
TAS5026A
SLES068A—February 2003—Revised January 2004
System Procedures for Initialization, Changing Data Rates, and Switching Between Master and Slave Modes
Clock unstable during transition.
HIGH and LOW intervals < 20 ns
Change from a 96-kHz data rate
MCLK_IN = 24.576 MHz
Change to a 48-kHz data rate
MCLK_IN = 12.288 MHz
MCLK
> 5 ms
MUTE
Terminal
Volume Ramp
Down 60 ms
Volume Ramp
Up 120 ms
RESET
Terminal
< 2 ms
ERR_RCVRY
Terminal
Release ERR_RCVRY and
then MUTE when I2C
registers are programmed
ERR_RCVRY can be set at
any time within this interval
Wait a minimum of 100 µs after the
LOW to HIGH transition of RESET
Set data rate and
restore other
register settings
via I2C
Figure 4−6. Changing the Data Sample Rate With an Unstable MCLK_IN Using the I2C
4.3
Changing Between Master and Slave Modes
The master and slave mode is set while the RESET terminal is active. Because this sequence employs the
RESET terminal the internal register settings are set to the default values.
Figure 4−7 shows the procedure to switch between master and slave modes and then restore the register
settings. In this example, the ERR_RCVRY terminal is used to hold off system re-initialization after RESET
is released. This permits the system controller to have as much additional time as necessary to restore the
register settings.
Once the data rate is set, the ERR_RCVRY and MUTE terminal signals are set high and the system
re-initializes.
SLES068A—February 2003—Revised January 2004
TAS5026A
35
System Procedures for Initialization, Changing Data Rates, and Switching Between Master and Slave Modes
Clock unstable during transition.
Change from Master Mode
Change to Slave Mode
MCLK
> 5 ms
MUTE
Terminal
Volume Ramp
Down 60 ms
Volume Ramp
Up 120 ms
RESET
Terminal
M_S
Terminal
Wait a minimum of
100 µs to set M_S
< 2 ms
ERR_RCVRY
Terminal
Release ERR_RCVRY and
then MUTE when I2C
registers are programmed
ERR_RCVRY can be set at
any time within this interval
Wait a minimum of 100 µs after the
LOW to HIGH transition of RESET
Restore register
settings via I2C
Figure 4−7. Changing Between Master and Slave Clock Modes
36
TAS5026A
SLES068A—February 2003—Revised January 2004
Specifications
5
Specifications
5.1
Absolute Maximum Ratings Over Operating Temperature Ranges (Unless
Otherwise Noted)†
Digital supply voltage range: DVDD_CORE, DVDD_PWM, DVDD_RCL . . . . . . . . . . . . . . . . . . −0.3 V to 4.2 V
Analog supply voltage range: AVDD_PLL, ADD_OSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4.2 V
Digital input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to DVDDX + 0.3 V
Operating free-air temperature, TAS5026A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
5.2
Recommended Operating Conditions
Supply voltage
Digital
Supply current
Digital
MIN
TYP
MAX
3
3.3
3.6
DVDDX, See Note 1
Operating
60
Power down, See Note 2
Power dissipation
Digital
Supply voltage
Analog
Supply current
Analog
Power dissipation
Analog
200
Power down
3
3.3
3.6
10
Power down, See Note 2
35
Power down, See Note 2
µW
V
mA
25
Operating
µA
mW
100
AVDDX, See Note 3
Operating
V
mA
25
Operating
UNIT
µA
mW
100
µW
NOTES: 3. DVDD_CORE, DVDD_PWM, DVDD_RCL
4. If the clocks are turned off.
5. AVDD_PLL, AVDD_OSC
5.3
Electrical Characteristics Over Recommended Operating Conditions
5.3.1
Static Digital Specifications Over Recommended Operating Conditions (Unless
Otherwise Noted)
PARAMETER
TEST CONDITIONS
MIN
MAX
UNIT
VIH
VIL
High-level input voltage
2
DVDD1
V
Low-level input voltage
0
0.8
V
VOH
VOL
High-level output voltage
Ilkg
Input leakage current
Low-level output voltage
5.3.2
IO = −1 mA
IO = 4 mA
2.4
V
−10
0.4
V
10
µA
Digital Interpolation Filter and PWM Modulator Over Recommended Operating
Conditions (Unless Otherwise Noted) (Fs = 48 kHz)
PARAMETER
TEST CONDITIONS
Pass band
MIN
Pass band ripple
Stop band
Stop band attenuation
Group delay
PWM modulation index (gain)
SLES068A—February 2003—Revised January 2004
TYP
0
24.1 kHz to 152.3 kHz
MAX
20
UNIT
kHz
±0.012
dB
24.1
kHz
50
dB
700
µs
0.93%
TAS5026A
37
Specifications
5.3.3
TAS5026A/TAS5110 System Performance Measured at the Speaker Terminals
Over Recommended Operating Conditions (Unless Otherwise Noted),
(Fs = 48 kHz)
PARAMETER
TEST CONDITIONS
MIN
SNR (EIAJ)
A-weighted
Dynamic range
A-weighted, -60 dB, f = 1 kHz, 20 Hz−20 kHz
THD+N
0 dB, 1 kHz, 20 Hz−20 kHz
5.4
TYP
MAX
UNIT
93
dB
94
dB
0.09%
Switching Characteristics
5.4.1
Command Sequence Timing
5.4.1.1
Reset Timing—RESET
CONTROL SIGNAL PARAMETERS OVER RECOMMENDED OPERATING CONDITIONS (UNLESS OTHERWISE NOTED)
PARAMETER
TEST CONDITIONS
tw(RESET)
Pulses duration, RESET active
tp(VALID_LOW)
tp(VALID_HIGH)
Propagation delay
td(VOLUME)
Delay time
MIN
TYP
MAX
50
Propagation delay
UNIT
ns
1
µs
4
5
ms
42
65
ms
RESET
tw(RESET)
VALID 1−6
VOLUME 1−6
tp(VALID_LOW)
td(VOLUME)
tp(VALID_HIGH)
Figure 5−1. RESET Timing
38
TAS5026A
SLES068A—February 2003—Revised January 2004
Specifications
5.4.1.2
Power-Down Timing—PDN
5.4.1.2.1 Long Recovery
CONTROL SIGNAL PARAMETERS OVER RECOMMENDED OPERATING CONDITIONS (UNLESS OTHERWISE NOTED)
PARAMETER
tw(PDN)
Pulse duration, PDN active
td(R PDNR)
tp(VALID_LOW)
Reset high to PDN rising edge
TEST CONDITIONS
MIN
TYP
MAX
50
UNIT
ns
16 MCLKs
ns
1
µs
tp(VALID_HIGH)
85
100
ms
td(VOLUME)
42
65
ms
td(R PDNR)
RESET
PDN
tw(PDN)
VALID 1−6
VOLUME 1−6
Normal
Operation
Normal
Operation
tp(VALID_HIGH)
tp(VALID_LOW)
td(VOLUME)
Figure 5−2. Power-Down and Power-Up Timing—RESET Preceding PDN
SLES068A—February 2003—Revised January 2004
TAS5026A
39
Specifications
5.4.1.2.2 Short Recovery
CONTROL SIGNAL PARAMETERS OVER RECOMMENDED OPERATING CONDITIONS (UNLESS OTHERWISE NOTED)
PARAMETER
tw(PDN)
Pulse duration, PDN active
td(R PDNR)
tp(VALID_LOW)
PDN high to reset rising edge
TEST CONDITIONS
MIN
TYP
MAX
50
ns
16 MCLKs
ns
1
µs
4
5
ms
42
65
ms
tp(VALID_HIGH)
td(VOLUME)
UNIT
td(R PDNR)
RESET
PDN
tw(PDN)
VALID 1−6
VOLUME 1−6
Normal
Operation
Normal
Operation
tp(VALID_HIGH)
tp(VALID_LOW)
td(VOLUME)
Figure 5−3. Power-Down and Power-Up Timing—RESET Following PDN
5.4.1.3
Error Recovery Timing—ERR_RCVRY
CONTROL SIGNAL PARAMETERS OVER RECOMMENDED OPERATING CONDITIONS (UNLESS OTHERWISE NOTED)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
tw(ER)
Pulse duration, ERR_RCVRY active
5 MCLKs
tp(VALID_LOW)
tp(VALID_HIGH)
Selectable for minimum or maximum
6
47
µs
4
5
ms
40
TAS5026A
ns
SLES068A—February 2003—Revised January 2004
Specifications
tw(ER)
ERR_RCVRY
VALID 1−6
Normal
Operation
Normal
Operation
tp(VALID_HIGH)
tp(VALID_LOW)
Figure 5−4. Error Recovery Timing
5.4.1.4
MUTE Timing—MUTE
CONTROL SIGNAL PARAMETERS OVER RECOMMENDED OPERATING CONDITIONS (UNLESS OTHERWISE NOTED)
PARAMETER
tw(MUTE)
td(VOL)
TEST CONDITIONS
Pulse duration, PDN active
MIN
TYP
MAX
3 MCLKs
UNIT
ns
42
ms
tw(MUTE)
MUTE
VOLUME
VALID 1−6
Normal
Operation
Normal
Operation
td(VOL)
td(VOL)
Figure 5−5. Mute Timing
SLES068A—February 2003—Revised January 2004
TAS5026A
41
Specifications
5.4.2 Serial Audio Port
5.4.2.1
Serial Audio Ports Slave Mode Over Recommended Operating Conditions (Unless
Otherwise Noted)
PARAMETER
MIN
f(SCLK)
tsu(SDIN)
Frequency, SCLK
SDIN setup time before SCLK rising edge
20
th(SDIN)
f(LRCLK)
SDIN hold time before SCLK rising edge
10
LRCLK frequency
32
tsu(LRCLK)
5.4.2.2
TYP
MAX
UNIT
12.288
MHz
ns
ns
48
MCLK_IN duty cycle
50%
SCLK duty cycle
50%
LRCLK duty cycle
50%
192
kHz
LRCLK setup time before SCLK rising edge
20
ns
MCLK high and low time
20
ns
Serial Audio Ports Master Mode, Load Conditions 50 pF Over Recommended
Operating Conditions (Unless Otherwise Noted)
PARAMETER
t(MSD)
t(MLRD)
5.4.2.3
MIN
TYP
MAX
UNIT
MCLK_IN to SCLK
0
5
ns
MCLK_IN to LRCLK
0
5
ns
DSP Serial Interface Mode Over Recommended Operating Conditions (Unless
Otherwise Noted)
PARAMETER
MIN
f(SCLK)
td(FS)
SCLK frequency
tw(FSHIGH)
tsu(SDIN)
Pulse duration, sync
SDIN and LRCLK setup time before SCLK falling edge
20
th(SDIN)
SDIN and LRCLK hold time from SCLK falling edge
10
TYP
Delay time, SCLK rising to Fs
MAX
UNIT
12.288
MHz
ns
1/(64×Fs)
SCLK duty cycle
ns
ns
ns
50%
SCLK
th(SDIN)
tsu(SDIN)
SDIN
Figure 5−6. Right-Justified, I2S, Left-Justified Serial-Protocol Timing
42
TAS5026A
SLES068A—February 2003—Revised January 2004
Specifications
SCLK
tsu(LRCLK)
LRCLK
NOTE: Serial data is sampled with the rising edge of SCLK (setup time = 20 ns and hold time = 10 ns).
Figure 5−7. Right, Left, and I2S Serial-Mode Timing Requirement
SCLK
LRCLK
t(MRLD)
t(MSD)
MCLK
Figure 5−8. Serial Audio Ports Master-Mode Timing
SCLK
tsu(LRCLK)
th(LRCLK)
LRCLK
tw(FSHIGH)
tsu(SDIN)
th(SDIN)
SDIN
Figure 5−9. DSP Serial-Port Timing
SLES068A—February 2003—Revised January 2004
TAS5026A
43
Specifications
SCLK
64 SCLKS
LRCLK
tw(FSHIGH)
SDIN
16 Bits
Left
Channel
16 Bits
Right
Channel
32 Bits Unused
Figure 5−10. DSP Serial-Port Expanded Timing
SCLK
tsu(SDIN) = 20 ns
th(SDIN) = 10 ns
SDIN
Figure 5−11. DSP Absolute Timing
44
TAS5026A
SLES068A—February 2003—Revised January 2004
Specifications
5.4.3 Serial Control Port—I 2C Operation
5.4.3.1
Timing Characteristics for I2C Interface Signals Over Recommended Operating
Conditions (Unless Otherwise Noted)
PARAMETER
fSCL
tw(H)
Frequency, SCL
tw(L)
tr
Pulse duration, SCL low
tf
tsu1
Fall time, SCL and SDA
th1
t(buf)
Hold time, SCL to SDA
tsu2
th2
tsu3
CL
STANDARD
MODE
TEST CONDITIONS
FAST MODE
MIN
MAX
MIN
MAX
0
100
0
400
Pulse duration, SCL high
4
0.6
4.7
1.3
Rise time, SCL and SDA
1000
300
Setup time, SDA to SCL
UNIT
kHz
µs
µs
300
ns
300
ns
250
100
ns
0
0
ns
Bus free time between stop and start condition
4.7
1.3
µs
Setup time, SCL to start condition
4.7
0.6
µs
Hold time, start condition to SCL
4
0.6
µs
Setup time, SCL to stop condition
4
0.6
Load capacitance for each bus line
400
tw(H)
tw(L)
tr
µs
400
pF
tf
SCLK
tsu
th1
SDA
Figure 5−12. SCL and SDA Timing
SCLK
th2
t(buf)
tsu2
tsu3
Start Condition
Stop Condition
SDA
Figure 5−13. Start and Stop Conditions Timing
SLES068A—February 2003—Revised January 2004
TAS5026A
45
Specifications
46
TAS5026A
SLES068A—February 2003—Revised January 2004
SLES068A—February 2003—Revised January 2004
MSP430
MCLK_IN
PDN
CLIP
MUTE
ERR_RCVRY
P1.3
P2.0
RESET
SDA
SCL
CSO
DM_SEL1
DM_SEL2
DBSPD
MCLKOUT
SDIN1
SDIN2
SDIN3
SCLK
LRCLK
PLL_FLT_2
PLL_FLT_1
M_S
XTAL_OUT
XTAL_IN
P1.0
P1.1
P1.2
P1.4/SMCLK/TCK
P1.5/IA1/TDI
ALKX1
ALKX2
ALKX0
ACLKX
AFSX
DA610
DSP
CLKOUT
AVDD_PLL
Reset,
Pwr Dwn
and
Status
Serial
Control
I/F
Clock,
PLL
and
Serial
Data
I/F
DVDD_PWM
DVSS_RCL
VREGC_CAP
DVDD_RCL
Auto Mute
De-Emphasis
Soft Volume
Error Recovery
Soft Mute
Clip Detect
Signal
Processing
PWM Ch.
PWM Ch.
PWM Ch.
PWM Ch.
PWM Ch.
PWM Ch.
PWM
Section
TAS5110
PWAP
H-Bridge
PWAM
PWBM
PWBP SHUTDOWN
RESET
PWM_AP_6
PWM_AM_6
VALID_6
VALID_5
TAS5110
PWAP
H-Bridge
PWAM
PWBM
PWBP SHUTDOWN
RESET
TAS5110
PWAP
H-Bridge
PWAM
PWBM
PWBP SHUTDOWN
RESET
TAS5110
PWAP
H-Bridge
PWAM
PWBM
PWBP SHUTDOWN
RESET
TAS5110
PWAP
H-Bridge
PWAM
PWBM
PWBP SHUTDOWN
RESET
TAS5110
PWAP
H-Bridge
PWAM
PWBM
PWBP SHUTDOWN
RESET
PWM_AP_5
PWM_AM_5
PWM_AM_4
VALID_4
PWM_AP_4
VALID_3
PWM AP_3
PWM AM_3
VALID_2
PWM_AM_2
PWM_AP_2
PWM_AM_1
VALID_1
PWM_AP_1
6
VREGB_CAP
VREGA_CAP
Power Supply
Application Information
Application Information
Figure 6−1. Typical TAS5026A Application
TAS5026A
47
Output Control
DVSS_PWM
AVSS_PLL
Application Information
6.1
Serial Audio Interface Clock Master and Slave Interface Configuration
6.1.1 Slave Configuration
Other Digital
Audio Sources
DA610 DSP
(Master Mode)
PCM1800
ADC
Left
Analog
OSCI
ALKR0
DOUT
Right
Analog
BCK
SYSCLK
GND
TAS5026A
(Slave Mode)
XTALI
OSCO
XTALO
ALKX0
SDIN1
ALKR1
ALKX1
SDIN2
ALKR2
ALKX2
SDIN3
ACLKR
ACLKX
SCLK
AFSX
LRCK
AFSR
LRCK
12.288
MHz XTAL
CLKIN
MCLKO
CLKOUT
MCLKO
NC
Figure 6−2. TAS5026A Serial Audio Port—Slave-Mode Connection Diagram
6.1.2 Master Configuration
Other Digital
Audio Sources
TAS5026A
(Master Mode)
DA610 DSP
PCM1800
ADC
Left
Analog
12.288
MHz XTAL
DOUT
Right
Analog
BCK
LRCK
SYSCLK
ALKR0
XTALI
XTALO
ALKX0
SDIN1
ALKR1
ALKX1
SDIN2
ALKR2
ALKX2
SDIN3
ACLKR
ACLKX
SCLK
AFSX
LRCK
AFSR
CLKIN
CLKOUT
GND
MCLKO
MCLKO
Figure 6−3. TAS5026A Serial Audio Port—Master-Mode Connection Diagram
48
TAS5026A
SLES068A—February 2003—Revised January 2004
Mechanical Data
7
Mechanical Data
PAG (S-PQFP-G64)
PLASTIC QUAD FLATPACK
0,27
0,17
0,50
48
0,08 M
33
49
32
64
17
0,13 NOM
1
16
7,50 TYP
10,20
SQ
9,80
12,20
SQ
11,80
Gage Plane
0,25
0,05 MIN
1,05
0,95
0°−ā 7°
0,75
0,45
Seating Plane
1,20 MAX
0,08
4040282 / C 11/96
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-026
SLES068A—February 2003—Revised January 2004
TAS5026A
49
Mechanical Data
50
TAS5026A
SLES068A—February 2003—Revised January 2004
Appendix A—Volume Table
Appendix A—Volume Table
VOLUME
SETTING
REGISTER VOLUME
(BIN)
GAIN dB
VOLUME
SETTING
REGISTER VOLUME
(BIN)
249
1111 1001
24
205
1100 1101
2
248
1111 1000
23.5
204
1100 1100
1.5
247
1111 0111
23
203
1100 1011
1
246
1111 0110
22.5
202
1100 1010
0.5
245
1111 0101
22
201
1100 1001
0
244
1111 0100
21.5
200
1100 1000
−0.5
D7 − D0
GAIN dB
D7 − D0
243
1111 0011
21
199
1100 0111
−1
242
1111 0010
20.5
198
1100 0110
−1.5
241
1111 0001
20
197
1100 0101
−2
240
1111 0000
19.5
196
1100 0100
−2.5
239
1110 1111
19
195
1100 0011
−3
238
1110 1110
18.5
194
1100 0010
−3.5
237
1110 1101
18
193
1100 0001
−4
236
1110 1100
17.5
192
1100 0000
−4.5
235
1110 1011
170
191
1011 1111
−5
234
1110 1010
16.5
190
1011 1110
−5.5
233
1110 1001
16
189
1011 1101
−6
232
1110 1000
15.5
188
1011 1100
−6.5
231
1110 0111
15
187
1011 1011
−7
230
1110 0110
14.5
186
1011 1010
−7.5
229
1110 0101
14
185
1011 1001
−8
228
1110 0100
13.5
184
1011 1000
−8.5
227
1110 0011
13
183
1011 0111
−9
226
1110 0010
12.5
182
1011 0110
−9.5
225
1110 0001
12
181
1011 0101
−10
224
1110 0000
11.5
180
1011 0100
−10.5
223
1101 1111
11
179
1011 0011
−11
222
1101 1110
10.5
178
1011 0010
−11.5
221
1101 1101
10
177
1011 0001
−12
220
1101 1100
9.5
176
1011 0000
−12.5
219
1101 1011
9
175
1010 1111
−13
218
1101 1010
8.5
174
1010 1110
−13.5
217
1101 1001
8
173
1010 1101
−14
216
1101 1000
7.5
172
1010 1100
−14.5
215
1101 0111
7
171
1010 1011
−15
214
1101 0110
6.5
170
1010 1010
−15.5
213
1101 0101
6
169
1010 1001
−16
212
1101 0100
5.5
168
1010 1000
−16.5
211
1101 0011
5
167
1010 0111
−17
210
1101 0010
4.5
166
1010 0110
−17.5
209
1101 0001
4
165
1010 0101
−18
208
1101 0000
3.5
164
1010 0100
−18.5
207
1100 1111
3
163
1010 0011
−19
206
1100 1110
2.5
162
1010 0010
−19.5
SLES068A—February 2003—Revised January 2004
TAS5026A
51
Appendix A—Volume Table
VOLUME
SETTING
REGISTER VOLUME
(BIN)
GAIN dB
VOLUME
SETTING
REGISTER VOLUME
(BIN)
161
1010 0001
−20
116
0111 0100
160
−42.5
1010 0000
−20.5
115
0111 0011
−43
D7 − D0
52
GAIN dB
D7 − D0
159
1001 1111
−21
114
0111 0010
−43.5
158
1001 1110
−21.5
113
0111 0001
−44
157
1001 1101
−22
112
0111 0000
−44.5
156
1001 1100
−22.5
111
0110 1111
−45
−45.5
155
1001 1011
−23
110
0110 1110
154
1001 1010
−23.5
109
0110 1101
−46
153
1001 1001
−24
108
0110 1100
−46.5
152
1001 1000
−24.5
107
0110 1011
−47
151
1001 0111
−25
106
0110 1010
−47.5
150
1001 0110
−25.5
105
0110 1001
−48
149
1001 0101
−26
104
0110 1000
−48.5
148
1001 0100
−26.5
103
0110 0111
−49
147
1001 0011
−27
102
0110 0110
−49.5
146
1001 0010
−27.5
101
0110 0101
−50
145
1001 0001
−28
100
0110 0100
−50.5
144
1001 0000
−28.5
99
0110 0011
−51
143
1000 1111
−29
98
0110 0010
−51.5
142
1000 1110
−29.5
97
0110 0001
−52
141
1000 1101
−30
96
0110 0000
−52.5
140
1000 1100
−30.5
95
0101 1111
−53
139
1000 1011
−31
94
0101 1110
−53.5
138
1000 1010
−31.5
93
0101 1101
−54
137
1000 1001
−32
92
0101 1100
−54.5
136
1000 1000
−32.5
91
0101 1011
−55
135
1000 0111
−33
90
0101 1010
−55.5
134
1000 0110
−33.5
89
0101 1001
−56
133
1000 0101
−34
88
0101 1000
−56.5
132
1000 0100
−34.5
87
0101 0111
−57
131
1000 0011
−35
86
0101 0110
−57.5
130
1000 0010
−35.5
85
0101 0101
−58
129
1000 0001
−36
84
0101 0100
−58.5
128
1000 0000
−36.5
83
0101 0011
−59
−59.5
127
0111 1111
−37
82
0101 0010
126
0111 1110
−37.5
81
0101 0001
−60
125
0111 1101
−38
80
0101 0000
−60.5
124
0111 1100
−38.5
79
0100 1111
−61
123
0111 1011
−39
78
0100 1110
−61.5
122
0111 1010
−39.5
77
0100 1101
−62
121
0111 1001
−40
76
0100 1100
−62.5
120
0111 1000
−40.5
75
0100 1011
−63
119
0111 0111
−41
74
0100 1010
−63.5
118
0111 0110
−41.5
73
0100 1001
−64
117
0111 0101
−42
72
0100 1000
−64.5
TAS5026A
SLES068A—February 2003—Revised January 2004
Appendix A—Volume Table
VOLUME
SETTING
REGISTER VOLUME
(BIN)
71
0100 0111
−65
36
0010 0100
70
0100 0110
−65.5
35
0010 0011
−83
69
0100 0101
−66
34
0010 0010
−83.5
68
0100 0100
−66.5
33
0010 0001
−84
0010 0000
−84.6
GAIN dB
VOLUME
SETTING
D7 − D0
REGISTER VOLUME
(BIN)
GAIN dB
D7 − D0
−82.6
67
0100 0011
−67
32
66
0100 0010
−67.5
31
0001 1111
−85.1
−68
30
0001 1110
−85.8
29
0001 1101
−86.1
28
0001 1100
−86.8
27
0001 1011
−87.2
26
0001 1010
−87.5
25
0001 1001
−88.4
24
0001 1000
−88.8
65
0100 0001
64
0100 0000
−68.5
63
0011 1111
−69
62
0011 1110
−69.5
61
0011 1101
−70
60
0011 1100
−70.5
59
0011 1011
−71
23
0001 0111
−89.3
58
0011 1010
−71.5
22
0001 0110
−89.8
57
0011 1001
−72
21
0001 0101
−90.3
56
0011 1000
−72.5
20
0001 0100
−90.9
55
0011 0111
−73
19
0001 0011
−91.5
54
0011 0110
−73.5
18
0001 0010
−92.1
53
0011 0101
−74
17
0001 0001
−92.8
0001 0000
−93.6
52
0011 0100
−74.5
16
51
0011 0011
−75
15
0000 1111
−94.4
0000 1110
−95.3
50
0011 0010
−75.5
14
49
0011 0001
−76
13
0000 1101
−96.3
12
0000 1100
−97.5
11
0000 1011
−98.8
10
0000 1010
−100.4
9
0000 1001
−102.4
8
0000 1000
−104.9
7
0000 0111
−108.4
6
0000 0110
−114.4
48
0011 0000
−76.6
47
0010 1111
−77
46
0010 1110
−77.5
45
0010 1101
−78
44
0010 1100
−78.5
43
0010 1011
−79
42
0010 1010
−79.6
5
0000 0101
MUTE
41
0010 1001
−80.1
4
0000 0100
MUTE
40
0010 1000
−80.6
3
0000 0011
MUTE
39
0010 0111
−81.1
2
0000 0010
MUTE
38
0010 0110
−81.5
1
0000 0001
MUTE
37
0010 0101
−82.1
0
0000 0000
MUTE
SLES068A—February 2003—Revised January 2004
TAS5026A
53
Appendix A—Volume Table
54
TAS5026A
SLES068A—February 2003—Revised January 2004
PACKAGE OPTION ADDENDUM
www.ti.com
11-Feb-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TAS5026APAG
ACTIVE
TQFP
PAG
64
160
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-4-260C-72 HR
TAS5026APAGR
ACTIVE
TQFP
PAG
64
1500
None
CU NIPDAU
Level-2-235C-1 YEAR
TAS5026APAGRG4
ACTIVE
TQFP
PAG
64
1500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-4-260C-72 HR
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MTQF006A – JANUARY 1995 – REVISED DECEMBER 1996
PAG (S-PQFP-G64)
PLASTIC QUAD FLATPACK
0,27
0,17
0,50
48
0,08 M
33
49
32
64
17
0,13 NOM
1
16
7,50 TYP
Gage Plane
10,20
SQ
9,80
12,20
SQ
11,80
0,25
0,05 MIN
1,05
0,95
0°– 7°
0,75
0,45
Seating Plane
0,08
1,20 MAX
4040282 / C 11/96
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-026
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1