DSEI 8 Fast Recovery Epitaxial Diode (FRED) VRSM V 640 640 VRRM Type C A TO-263 AA DSEI 8-06AS NC V 600 600 A DSEI 8-06A DSEI 8-06AS C (TAB) Symbol Test Conditions IFRMS IFAVM ÿÿ① IFRM TVJ = TVJM TC = 115°C; rectangular, d = 0.5 tP < 10 ms; rep. rating, pulse width limited by TVJM 16 8 130 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 100 110 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 85 95 A A TVJ = 45°C t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 50 50 A2s A2s TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 36 37 A2s A2s -40...+150 150 -40...+150 °C °C °C 50 W I2t IFAVM = 8 A VRRM = 600 V trr = 35 ns TVJ TVJM Tstg Ptot TC = 25°C Md Mounting torque Maximum Ratings TO-220 AC DSEI 8-06A C A C A = Anode, C = Cathode, NC = No connection TAB = Cathode Features International standard package JEDEC TO-220 AC & TO-263 AB Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour Epoxy meets UL 94V-0 ● ● ● ● ● ● 0.4...0.6 Weight 2 Nm g ● Applications Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders ● Symbol Test Conditions typ. Characteristic Values max. ● ● IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR = VRRM VR = 0.8 • VRRM VR = 0.8 • VRRM 20 10 1.5 mA mA mA VF IF = 8 A; TVJ = 150°C TVJ = 25°C 1.3 1.5 V V 0.98 28.7 V mW 2.5 60 K/W K/W K/W For power-loss calculations only TVJ = TVJM RthJC RthCK RthJA 0.5 trr IF = 1 A; -di/dt = 50 A/ms; VR = 30 V; TVJ = 25°C 35 50 ns IRM VR = 350 V; IF = 8 A; -diF/dt = 64 A/ms L £ 0.05 mH; TVJ = 100°C 2.5 2.8 A ● ● ● Advantages High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling ● ● ● ① IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved ● ● ● 033 VT0 rT ● 1-2 DSEI 8, 600 V Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Dimensions TO-220 AC Dim. Millimeter Min. Max. Min. Inches Max. A B 12.70 14.73 14.23 16.51 0.500 0.580 0.560 0.650 C D 9.66 10.66 3.54 4.08 0.380 0.420 0.139 0.161 E F 5.85 2.54 6.85 3.42 0.230 0.420 0.100 0.135 G H 1.15 - 1.77 6.35 0.045 0.070 0.250 J K 0.64 4.83 0.89 5.33 0.025 0.035 0.190 0.210 L M 3.56 0.38 4.82 0.56 0.140 0.190 0.015 0.022 N Q 2.04 0.64 2.49 1.39 0.080 0.115 0.025 0.055 Dimension TO-263 AA see DSEI 19 © 2000 IXYS All rights reserved 033 Fig. 7 Transient thermal impedance junction to case. 2-2