DSDI 60 Super Fast Recovery Diode IFAVM = 63 A VRRM = 1400-1800 V trr = 40 ns Preliminary Data V 1400 1600 1800 VRRM Type C A TO-247 AD V 1400 1600 1800 C DSDI 60-14A DSDI 60-16A DSDI 60-18A A A = Anode, C = Cathode Symbol Test Conditions IFRMS IFAVM ÿÿ① IFRM TVJ = TVJM TC = 60°C; rectangular, d = 0.5 tP < 10 ms; rep. rating, pulse width limited by TVJM 100 63 800 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 540 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 450 480 A A Maximum Ratings t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1250 1200 A2s A2s TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1000 950 A2s A2s -40...+150 150 -40...+150 °C °C °C 416 W Features ● ● ● ● ● I2t TVJ = 45°C TVJ TVJM Tstg ● ● ● TC = 25°C Md Mounting torque 0.8...1.2 Weight Symbol Nm 6 Test Conditions g Characteristic Values typ. max. IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR = VRRM VR = 0.8 • VRRM VR = 0.8 • VRRM 1 0.5 3 VF IF = 70 A; TVJ = 125°C TVJ = 25°C 2.6 2 4.1 mA mA mA V V ● ● ● ● ● ● ● For power-loss calculations only TVJ = TVJM RthJC RthCK trr IF = 1 A; -di/dt = 200 A/ms; VR = 30 V; TVJ = 25°C trr IF = 70 A; -di/dt = 500 A/ms; VR = 1000 V; IRM TVJ = 25°C trr IRM IF = 70 A; -di/dt = 500 A/ms; VR = 1000 V; TVJ = 125°C 1.9 10 V mW 0.4 0.25 K/W K/W 40 ns 300 ns 60 A 400 85 ns A ① IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages ● ● VT0 rT International standard package JEDEC TO-247 AD Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour Epoxy meets UL 94V-0 Creepage distance between leads 8.5 mm Applications ● Ptot C ● ● ● High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling Dimensions See DSEI 60-12 on page D5 - 27 036 VRSM 1-1