DATA SHEET ZENER DIODES RD4.7UJ to RD39UJ LOW NOISE SHARP BREAKDOWN CHARACTERISTICS ZENER DIODES 2PIN ULTRA SUPER MINI MOLD DESCRIPTION Type RD4.7UJ to RD39UJ Series are 2PIN Ultra Super Mini PACKAGE DIMENSIONS (Unit: mm) Mold Package zener diodes possessing an allowable power dissipation of 150 mW featuring low noise and sharp breakdown characteristic. They are intended for use in audio equip- 0.3±0.05 0.8±0.1 2.1±0.1 ment, instrument equipment. 1.3±0.1 FEATURES • Low Noise • Sharp Breakdown characteristics • Vz; Applied E24 standard Circuits for Constant Voltage, Constant Current, Waveform Cathode Indication 0.15 APPLICATIONS 0.7±0.1 clipper, Surge absorber, etc. P 150 mW Forward Current IF 100 mA Reverse Surge Power PRSM 2.2 W (at t = 10 µs/1 pulse) 0.11+0.05 –0.01 Power Dissipation 0±0.05 MAXIMUM RATINGS (TA = 25 °C) Show Fig. 6 Junction Temperature Tj 150 °C Storage Temperature Tstg –55 to +150 °C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D13938EJ3V0DS00 (3rd edition) (Previous No. DC-2135) Date Published March 1999 N CP(K) Printed in Japan © 1993 RD4.7UJ to RD39UJ ELECTRICAL CHARACTERISTICS (TA = 25 ± 2 °C) Dynamic Impedance Zz (Ω)Note 2 Zener Voltage Type Number Class N RD4.7UJ RD5.1UJ RD5.6UJ RD6.2UJ RD6.8UJ RD7.5UJ RD8.2UJ RD9.1UJ RD10UJ RD11UJ RD12UJ RD13UJ 2 Vz (V)Note 1 MIN. MAX. 4.39 4.91 N1 4.39 4.62 N2 4.52 4.76 N3 4.66 4.91 N 4.81 5.36 N1 4.81 5.05 N2 4.95 5.20 N3 5.10 5.36 N 5.26 5.91 N1 5.26 5.54 N2 5.44 5.73 N3 5.63 5.91 N 5.81 6.53 N1 5.81 6.11 N2 6.01 6.32 N3 6.21 6.53 N 6.41 7.14 N1 6.41 6.74 N2 6.60 6.94 N3 6.80 7.14 N 7.00 7.83 N1 7.00 7.35 N2 7.21 7.60 N3 7.46 7.83 N 7.69 8.61 N1 7.69 8.08 N2 7.94 8.34 N3 8.20 8.61 N 8.47 9.51 N1 8.47 8.91 N2 8.76 9.21 N3 9.06 9.51 N 9.35 10.51 N1 9.35 9.82 N2 9.66 10.16 N3 10.00 10.51 N 10.32 11.50 N1 10.32 10.84 N2 10.64 11.17 N3 10.97 11.50 N 11.28 12.52 N1 11.28 11.83 N2 11.59 12.17 N3 11.93 12.52 N 12.29 13.86 N1 12.29 12.95 N2 12.72 13.40 N3 13.17 13.86 Reverse Current IR (µA) Iz (mA) MAX. Iz (mA) MAX. VR (V) 0.5 800 0.5 2 1.0 0.5 500 0.5 2 1.5 0.5 200 0.5 1 2.5 0.5 100 0.5 1 3.0 0.5 60 0.5 0.5 3.5 0.5 60 0.5 0.5 4.0 0.5 60 0.5 0.5 5.0 0.5 60 0.5 0.5 6.0 0.5 60 0.5 0.1 7.0 0.5 60 0.5 0.1 8.0 0.5 80 0.5 0.1 9.0 0.5 80 0.5 0.1 10.0 Data Sheet D13938EJ3V0DS00 RD4.7UJ to RD39UJ Dynamic Impedance Zz (Ω)Note 2 Zener Voltage Type Number Class Vz (V)Note 1 MIN. RD15UJ RD16UJ RD18UJ RD20UJ RD22UJ RD24UJ RD27UJ RD30UJ RD33UJ RD36UJ RD39UJ MAX. N 13.63 15.38 N1 13.63 14.35 N2 14.12 14.85 N3 14.62 15.38 N 15.13 16.91 N1 15.13 15.87 N2 15.58 16.36 N3 16.07 16.91 N 16.63 18.81 N1 16.63 17.52 N2 17.24 18.15 N3 17.87 18.81 N 18.51 20.79 N1 18.51 19.42 N2 19.14 20.12 N3 19.80 20.79 N 20.46 22.82 N1 20.46 21.47 N2 21.09 22.15 N3 21.76 22.82 N 22.42 25.17 N1 22.42 23.59 N2 23.19 24.38 N3 23.98 25.17 N 24.75 27.95 N1 24.75 26.04 N2 25.56 26.96 N3 26.46 27.95 N 27.38 31.04 N1 27.38 29.00 N2 28.35 30.04 N3 29.37 31.04 N 30.30 33.97 N1 30.30 32.02 N2 31.21 32.98 N3 32.14 33.97 N 33.08 36.83 N1 33.08 34.92 N2 33.95 36.85 N3 34.87 36.83 N 35.78 39.67 N1 35.78 37.75 N2 36.63 38.69 N3 37.56 39.67 Reverse Current IR (µA) Iz (mA) MAX. Iz (mA) MAX. VR (V) 0.5 80 0.5 0.1 11 0.5 80 0.5 0.1 12 0.5 80 0.5 0.1 13 0.5 100 0.5 0.1 15 0.5 100 0.5 0.1 17 0.5 120 0.5 0.1 19 0.5 150 0.5 0.1 21 0.5 200 0.5 0.1 23 0.5 250 0.5 0.1 25 0.5 300 0.5 0.1 27 0.5 360 0.5 0.1 30 Note 1. Tested with pulse (40 ms) 2. Zz is measured at Iz by given a very small A.C. current signal Data Sheet D13938EJ3V0DS00 3 RD4.7UJ to RD39UJ TYPICAL CHARACTERISTICS (TA = 25 °C) Fig. 1 P – TA RATING 200 P - Power Dissipation - mW 30×30×0.75 P.C.B. (Ceramic) 150 20×15×0.75 P.C.B. (Ceramic) 10×7.5×0.75 P.C.B. (Glass Epoxy) 100 10×7.5×0.75 P.C.B. (Ceramic) 50 0 50 100 150 200 TA - Ambient Temperature - °C 10 m 1m 100 µ 10 µ RD15UJ RD13UJ RD12UJ RD11UJ RD10UJ 10 m 1m 100 µ 10 µ 3 4 5 6 7 8 9 Vz - Zener Voltage - V (a) 4 RD9.1UJ RD8.2UJ RD7.5UJ RD6.8UJ 100 m Iz - Zener Current - A Iz - Zener Current - A 100 m RD6.2UJ RD4.7UJ RD5.1UJ RD5.6UJ Fig. 2 Iz – Vz CHARACTERISTICS (a to d) 9 10 11 12 13 Vz - Zener Voltage - V (b) Data Sheet D13938EJ3V0DS00 14 15 Iz - Zener Current - A 1m 100 µ RD39UJ RD36UJ RD33UJ RD30UJ RD27UJ RD24UJ RD22UJ RD20UJ 100 m 10 m 10 m 1m 100 µ 10 µ 10 µ 18 20 22 24 26 28 28 30 Vz - Zener Voltage - V (c) 32 34 36 38 40 42 44 Vz - Zener Voltage - V (d) Fig. 3 γ z – Vz CHARACTERISTICS %/°C 0.08 32 24 0.06 16 0.04 mV/°C 0.02 8 0 0 –0.02 –8 –0.04 –16 4 8 12 16 20 24 28 32 36 γZ -VZ - Temperature Coefficient - mV/°C 16 γZ -VZ - Temperature Coefficient - %/°C Iz - Zener Current - A 100 m RD18UJ RD16UJ RD4.7UJ to RD39UJ 40 VZ - Zener Voltage - V Data Sheet D13938EJ3V0DS00 5 RD4.7UJ to RD39UJ Fig. 4 TRANSIENT THERMAL IMPEDANCE CHARACTERISTIC Zth – Transient Thermal Impedance – °C/W 1000 833 °C/W 100 10 1 1m P.C.B. (Glass Epoxy) (30mm×30 mm×1.6mm) 10 m 100 m 1 10 100 t – Time – s Fig. 5 SURGE REVERSE POWER RATINGS 1000 TA = 25 °C PRSM PRSM – Surge Reverse Power – W Repetitive tT 100 10 1 1µ 10 µ 100µ 1m tT – Pulse Width – s 6 Data Sheet D13938EJ3V0DS00 10 m 100 m RD4.7UJ to RD39UJ [MEMO] Data Sheet D13938EJ3V0DS00 7 RD4.7UJ to RD39UJ [MEMO] • The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. • Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated “quality assurance program“ for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98.8