3.0x1.5 mm SMD CHIP LED LAMP APL3015MBC BLUE Features Description !3.0mmx1.5mm SMT LED, 1.4mm THICKNESS. The Blue source color devices are made with GaN on !LOW POWER CONSUMPTION. SiC Light Emitting Diode. !WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. It is !IDEAL FOR BACKLIGHT AND INDICATOR. recommended to use a wrist band or anti-electrostatic !VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. !INNER All devices, equipment and machinery must be LENS TYPE electrically grounded. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0330 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 1 OF4 Selection Guide Par t No . Dic e APL3015MBC Iv (mc d ) @ 20 mA L en s Ty p e BLUE ( GaN ) Viewin g An g le Mi n . Ty p . 2θ1/2 7 20 70° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e λpeak Peak Wavelength Blue λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un its Tes t Co n d it io n s 430 nm IF=20mA Blue 455 nm IF=20mA Spectral Line Halfwidth Blue 60 nm IF=20mA C Capacitance Blue 65 pF VF=0V;f=1MHz VF Forward Voltage Blue 4.0 4.5 V IF=20mA IR Reverse Current Blue 10 uA V R = 5V Absolute Maximum Ratings at TA=25°°C P ar am et er B lu e Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +80°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0330 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 2 OF4 Blue APL3015MBC SPEC NO: CDA0330 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 3 OF4 APL3015MBC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0330 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 4 OF4