KINGBRIGHT APED3820MBC

3.8x2.0mm DOME LENS SMD CHIP LED LAMP
APED3820MBC
Features
Description
lLOW
SiC Light Emitting Diode.
l3.8mmx2.0mm SMT LED,3.2mm THICKNESS.
POWER CONSUMPTION.
lIDEAL FOR BACKLIGHT AND INDICATOR.
l VARIOUS
lPACKAGE
COLORS AND LENS TYPES AVAILABLE.
: 500PCS / REEL.
BLUE
The Blue source color devices are made with GaN on
Static electricity and surge damage the LEDS. It is
recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAB0723
APPROVED: J. Lu
REV NO: V.4
CHECKED: Allen Liu
DATE: APR/04/2003
DRAWN: D.H.FANG
PAGE: 1 OF 4
Selection Guide
P ar t N o .
Dic e
APED 3820MBC
Iv (m c d )
@ 20 m A
L en s Ty p e
BLUE(GaN)
WATER C LEAR
Mi n .
Ty p .
10
25
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
V i ew i n g
An g le
2θ1/2
60° (H)
35° (V)
Electrical / Optical Characteristics at TA=25°°C
Sy m b o l
P ar am et er
λp e a k
Peak Wavelength
Blue
λD
D omi nate Wavelength
∆λ1/2
D ev i c e
Ty p .
Un its
Tes t C o n d i t i o n s
430
nm
I F =20mA
Blue
466
nm
I F =20mA
Spectral Li ne Half-wi dth Blue
60
nm
I F =20mA
pF
VF=0V;f=1MHz
4.5
V
I F =20mA
10
uA
V R = 5V
C
C apaci tance
Blue
100
VF
Forward Voltage
Blue
3.8
IR
Reverse C urrent
Blue
Max .
Absolute Maximum Ratings at TA=25°°C
P ar am et er
B lu e
Un its
Power di ssi pati on
105
mW
Peak Forward C urrent [1]
150
mA
D C Forward C urrent
30
Reverse Voltage
5
-40°C To +85°C
Operati ng Temperature
V
-40°C To +85°C
Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB0723
APPROVED: J. Lu
mA
REV NO: V.4
CHECKED: Allen Liu
DATE: APR/04/2003
DRAWN: D.H.FANG
PAGE: 2 OF 4
Blue
SPEC NO: DSAB0723
APPROVED: J. Lu
APED3820MBC
REV NO: V.4
CHECKED: Allen Liu
DATE: APR/04/2003
DRAWN: D.H.FANG
PAGE: 3 OF 4
APED3820MBC
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAB0723
APPROVED: J. Lu
REV NO: V.4
CHECKED: Allen Liu
DATE: APR/04/2003
DRAWN: D.H.FANG
PAGE: 4 OF 4