FDP054N10 N-Channel PowerTrench® MOSFET 100V, 144A, 5.5mΩ Features Description • RDS(on) = 4.6mΩ ( Typ.)@ VGS = 10V, ID = 75A This N-Channel MOSFET is produced using Fairchild Semiconductor’s advanced PowerTrench process that has been especially tailored to minimize the on-state resistance and yet maintain superior switching performance. • Fast Switching Speed • Low Gate Charge • High Performance Trench Technology for Extremely Low RDS(on) Application • High Power and Current Handling Capability DC to DC Converters / Synchronous Rectification • RoHS Compliant D G G D S TO-220 S MOSFET Maximum Ratings TC = 25oC unless otherwise noted Symbol VDSS Drain to Source Voltage VGSS Gate to Source Voltage ID Parameter Drain Current IDM Drain Current EAS Single Pulsed Avalanche Energy dv/dt Peak Diode Avalanche Energy Ratings 100 Units V ±20 V - Continuous (TC = 25oC, Silicon Limited) 144* - Continuous (TC = 100oC, Silicon Limited) 102 - Continuous (TC = 25oC, Package Limited) 120 - Pulsed A (Note 1) 576 A (Note 2) 1153 mJ 3.6 V/ns (Note 3) (TC = 25oC) 263 W - Derate above 25oC 1.75 W/oC PD Power Dissipation TJ, TSTG Operating and Storage Temperature Range TL Maximum Lead Temperature for Soldering Purpose, 1/8” from Case for 5 Seconds -55 to +175 o C 300 o C *Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 120A. Thermal Characteristics Symbol Parameter Ratings RθJC Thermal Resistance, Junction to Case 0.57 RθJA Thermal Resistance, Junction to Ambient 62.5 ©2009 Fairchild Semiconductor Corporation FDP054N10 Rev. A 1 Units o C/W www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET April 2009 Device Marking FDP054N10 Device FDP054N10 Package TO-220 Reel Size - Tape Width - Quantity 50 Electrical Characteristics TC = 25oC unless otherwise noted Symbol Parameter Test Conditions Min. Typ. Max. Units Off Characteristics BVDSS ΔBVDSS ΔTJ Drain to Source Breakdown Voltage ID = 250μA, VGS = 0V, TC = 25oC 100 - - V Breakdown Voltage Temperature Coefficient ID = 250μA, Referenced to 25oC - 0.01 - V/oC IDSS Zero Gate Voltage Drain Current VDS = 100V, VGS = 0V - - 1 VDS = 100V, VGS = 0V, TC = 150oC - - 500 μA IGSS Gate to Body Leakage Current VGS = ±20V, VDS = 0V - - ±100 2.5 3.5 4.5 V - 4.6 5.5 mΩ - 192 - S nA On Characteristics VGS(th) RDS(on) Gate Threshold Voltage VGS = VDS, ID = 250μA Static Drain to Source On Resistance VGS = 10V, ID = 75A gFS Forward Transconductance VGS = 10V, ID = 75A (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Qg(tot) Total Gate Charge at 10V Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge VDS = 25V, VGS = 0V f = 1MHz VDS = 80V, ID = 75A, VGS = 10V (Note 4,5) - 9985 13280 pF - 935 1245 pF - 390 585 pF - 156 203 nC - 53 - nC - 48 - nC Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time VDD = 50V, ID = 75A VGS = 10V, RGEN = 4.7Ω (Note 4,5) - 44 98 ns - 92 194 ns - 80 170 ns - 39 88 ns Drain-Source Diode Characteristics IS Maximum Continuous Drain to Source Diode Forward Current - - 144 A ISM Maximum Pulsed Drain to Source Diode Forward Current - - 576 A VSD Drain to Source Diode Forward Voltage VGS = 0V, ISD = 75A - - 1.3 V trr Reverse Recovery Time - 57 - ns Qrr Reverse Recovery Charge VGS = 0V, ISD =75A dIF/dt = 100A/μs - 121 - nC (Note 4) Notes: 1: Repetitive Rating: Pulse width limited by maximum junction temperature 2: L = 0.41mH, IAS = 75A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C 3: ISD ≤ 75A, di/dt ≤ 200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C 4: Pulse Test: Pulse width ≤ 300μs, Duty Cycle ≤ 2% 5: Essentially Independent of Operating Temperature Typical Characteristics FDP054N10 Rev. A 2 www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET Package Marking and Ordering Information Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 1000 VGS = 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V * Notes : 1. VDS = 20V 2. 250μs Pulse Test ID, Drain Current[A] ID, Drain Current[A] 1000 100 *Notes: 1. 250μs Pulse Test 100 o 150 C o 25 C 10 o -55 C o 2. TC = 25 C 1 10 0.1 3 6 1 VDS, Drain-Source Voltage[V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage IS, Reverse Drain Current [A] 1000 6 VGS = 10V 5 VGS = 20V 4 o 150 C 100 o 25 C 10 Notes: 1. VGS = 0V o * Note : TC = 25 C 2. 250μs Pulse Test 3 0 100 200 ID, Drain Current [A] 300 1 0.2 400 Figure 5. Capacitance Characteristics 1.2 10 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Ciss 10000 Coss 1000 Crss * Note: 1. VGS = 0V 2. f = 1MHz 100 0.1 FDP054N10 Rev. A 0.4 0.6 0.8 1.0 VSD, Body Diode Forward Voltage [V] Figure 6. Gate Charge Characteristics VGS, Gate-Source Voltage [V] 100000 Capacitances [pF] 7 Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 7 RDS(on) [mΩ], Drain-Source On-Resistance 4 5 6 VGS, Gate-Source Voltage[V] 1 10 VDS, Drain-Source Voltage [V] VDS = 20V VDS = 50V VDS = 80V 8 6 4 2 * Note : ID = 75A 0 0 30 3 30 60 90 120 Qg, Total Gate Charge [nC] 150 180 www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET Typical Performance Characteristics Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 2.4 RDS(on), [Normalized] Drain-Source On-Resistance BVDSS, [Normalized] Drain-Source Breakdown Voltage 1.2 1.1 1.0 0.9 * Notes : 1. VGS = 0V 2. ID = 10mA 0.8 -80 -40 0 40 80 120 160 o TJ, Junction Temperature [ C] 2.0 1.6 1.2 0.8 * Notes : 1. VGS = 10V 2. ID = 75A 0.4 -80 200 Figure 9. Maximum Safe Operating Area -40 0 40 80 120 160 o TJ, Junction Temperature [ C] 200 Figure 10. Maximum Drain Current vs. Case Temperature 150 1000 100μs 100 ID, Drain Current [A] ID, Drain Current [A] 10μs 1ms 10ms 10 DC Operation in This Area is Limited by R DS(on) 1 100 Limitted by package 50 *Notes: o 0.1 1. TC = 25 C o 0.01 0.1 2. TJ = 175 C 3. Single Pulse 1 10 VDS, Drain-Source Voltage [V] 0 25 100 200 50 75 100 125 o TC, Case Temperature [ C] 150 175 Figure 11. Transient Thermal Response Curve Thermal Response [ZθJC] 1 0.5 0.1 0.2 0.1 0.01 t1 0.02 0.01 * Notes : t2 o 1. ZθJC(t) = 0.57 C/W Max. 2. Duty Factor, D=t1/t2 3. TJM - TC = PDM * ZθJC(t) Single pulse 0.001 -5 10 FDP054N10 Rev. A PDM 0.05 -4 10 -3 -2 -1 10 10 10 Rectangular Pulse Duration [sec] 4 1 10 www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET Typical Performance Characteristics (Continued) FDP054N10 N-Channel PowerTrench® MOSFET Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveforms Unclamped Inductive Switching Test Circuit & Waveforms FDP054N10 Rev. A 5 www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + V DS _ I SD L D r iv e r R V V GS ( D r iv e r ) G S G S am e T ype as DUT V DD • d v / d t c o n t r o lle d b y R G • I S D c o n t r o lle d b y p u ls e p e r io d G a t e P u ls e W id th D = -------------------------G a te P u ls e P e r io d 10V I F M , B o d y D io d e F o r w a r d C u r r e n t I SD ( DUT ) d i/ d t IR M B o d y D io d e R e v e r s e C u r r e n t V DS ( DUT ) B o d y D io d e R e c o v e r y d v / d t V V SD DD B o d y D io d e F o r w a r d V o lt a g e D r o p FDP054N10 Rev. A 6 www.fairchildsemi.com TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 (45° 1.52 ±0.10 10.08 ±0.30 (1.00) 13.08 ±0.20 ) 1.27 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] +0.10 0.50 –0.05 2.54TYP [2.54 ±0.20] 2.40 ±0.20 10.00 ±0.20 FDP054N10 Rev. A 7 www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET Mechanical Dimensions tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 FDP054N10 Rev. A 8 www.fairchildsemi.com FDP054N10 N-Channel PowerTrench® MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Auto-SPM™ PowerTrench® F-PFS™ The Power Franchise® Build it Now™ PowerXS™ FRFET® ® CorePLUS™ Global Power ResourceSM Programmable Active Droop™ ® CorePOWER™ Green FPS™ QFET TinyBoost™ CROSSVOLT™ Green FPS™ e-Series™ QS™ TinyBuck™ CTL™ Gmax™ Quiet Series™ TinyLogic® Current Transfer Logic™ GTO™ RapidConfigure™ ® TINYOPTO™ EcoSPARK IntelliMAX™ TinyPower™ EfficentMax™ ISOPLANAR™ ™ TinyPWM™ Saving our world, 1mW /W /kW at a time™ EZSWITCH™ * MegaBuck™ TinyWire™ ™* SmartMax™ MICROCOUPLER™ TriFault Detect™ SMART START™ MicroFET™ TRUECURRENT™* SPM® MicroPak™ ® μSerDes™ STEALTH™ MillerDrive™ Fairchild® SuperFET™ MotionMax™ Fairchild Semiconductor® SuperSOT™-3 Motion-SPM™ FACT Quiet Series™ SuperSOT™-6 OPTOLOGIC® UHC® ® FACT® OPTOPLANAR Ultra FRFET™ SuperSOT™-8 ® FAST® UniFET™ SupreMOS™ FastvCore™ VCX™ SyncFET™ FETBench™ VisualMax™ Sync-Lock™ PDP SPM™ FlashWriter® * XS™ ®* Power-SPM™ FPS™