Octane & G24 SHDSL Conexant S560-6600-JF • Designed to meet the requirements of UL1950 and EN60950 basic insulation with 250 VAC working voltage • UL file number E150991, BABT certificate number NC0011825, CB certificate number 14210 • • • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Minimum interwinding breakdown voltage of 1500 Vrms for 1 minute between line and IC • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias Minimum interwinding breakdown voltage of 600 Vrms for 1 minute between pins 1 and 2 • All specifcations must be met for any DC unbalance current up to 50mA max in the line side ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±7% Leakage Inductance2 µH DCR Ω max Line : IC (1 - 4) (1 - 4) IC Side 0.70 : 1 3.18 15 7.8 Interwinding Capacitance3 pF max Longitudinal Balance4 dB max Harmonic Distortion4 dB max Line Side Line : IC 20kHz 500kHz 4Vrms 5kHz 24 200 52 -85 Part Number S560-6600-JF All measurements are made with pin 2 connected to pin 3 and pin 5 connected to pin 7 except for breakdown voltage between pin 1 and 2. 1. Inductance measured at 10 kHz, 0.1 Vac 2. Leakage inductance measured at 100 kHz, 0.1 Vac 3. Interwinding capacitance measured at 10 kHz, 1.0 Vac 4. Measured with line impedance of 135 Ω and IC impedance of 275.5 Ω SCHEMATIC S560-6600-JF 8 1 5 3 7 2 6 4 IC LINE ©2004 Bel Fuse Inc. Specifications subject to change without notice. 12.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 Octane & G24 SHDSL Conexant S560-6600-JF MECHANICAL S560-6600-JF S560-6600-JF Tape and Reel Packaging 24 mm wide by 20 mm pitch; 13 inch OD, 4 inch ID 200 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards S560-6600-JF ©2004 Bel Fuse Inc. Specifications subject to change without notice. 12.04 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2