SHM15 - SHM100 and SHM15SMS - SHM100SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 100-250 mA 1500 ─ 10000 VOLTS 5 µsec HIGH VOLTAGE RECTIFIER Designer’s Data Sheet Part Number / Ordering Information 1/ SHM _ _ ___ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ ⏐ L 2/ L Screening = None TX = TX Level TXV = TXV Level S = S Level FEATURES: Package • • • • • • • ___ = Axial SMS = Surface Mount Square Tab Voltage 15 = 1500 20 = 2000 25 = 2500 30 = 3000 40 = 4000 50 = 5000 60 = 6000 80 = 8000 100 = 10000 Standard Recovery: 5 µsec Maximum PIV to 10000 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available2/ ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Symbol PIV I0 IR @ PIV VF IFSM tRR CJ mA μA Volts Amps µsec Units Conditions SHM15 SHM20 SHM25 SHM30 SHM40 SHM50 SHM60 SHM80 SHM100 Volts 1500 2000 2500 3000 4000 5000 6000 8000 10000 25°C 250 250 250 150 150 150 100 100 100 100°C L SMS 185 215 185 215 185 215 110 130 110 130 110 130 75 85 75 85 75 85 25°C 100°C 25°C 25°C 25°C 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 25 25 25 25 25 25 25 25 25 6 6 6 10 10 10 16 16 16 15 15 15 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. lead temp. for soldering is 250°C, 3/8” from the case for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=50mA, IR=100mA, IRR=25mA, TA=25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial DATA SHEET #: RV0007B Typical Thermal Impedance θJL θJE pF VR = 100V fT = 1MHZ 8 8 8 4 4 4 2 2 2 °C/W 65 65 65 65 65 65 65 65 65 SMS (Square) DOC 55 55 55 55 55 55 55 55 55 SHM15 - SHM100 and SHM15SMS - SHM100SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: AXIAL RECTIFIER D B DIMENSIONS: SHM15-50 ØC D ØA DIM MIN MAX A --- .140” B --- .300” C 0.025” 0.033” D 1.0” --- DIMENSIONS: SHM60-100 B MIN MAX A --- .140” B --- .400” C 0.025” 0.033” D 1.0” --- DIMENSIONS: SHM15-50 A A C DIM DIM MIN MAX A .127” .140” B .280” .320” C 0.022” 0.028” D .002” --- D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIMENSIONS: SHM60-100 DIM MIN MAX A .127” .140” B .360” .450” C 0.022” 0.028” D .002” --- DATA SHEET #: RV0007B DOC