SFT2369A2 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Dual Microminiature Package 100 mA 15 Volts Dual NPN Transistor DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SFT2369A2 __ __ │ └ Screening 2/ __= Commercial │ TX= TX Level │ TXV= TXV Level │ S= S Level │ └ Package GW= Gullwing Features: • • • • • High Speed Switching Transistor Suitable in chopper, UHF and RF application Multiple Devices Reduce Board Space Replacement for 2N2369AU TX, TXV, S-Level Screening Available 2/ Maximum Ratings Symbol Value Units Collector – Emitter Voltage VCEO 15 Volts Collector – Base Voltage VCBO 40 Volts Emitter – Base Voltage VEBO 4.5 Volts IC 100 mA PD 360 500 mW TOP & Tstg -65 to +200 ºC RθJ-PCB 350 ºC/W Continuous Collector Current Per Device Total Power Dissipation @ TA= 25ºC Operating & Storage Temperature Maximum Thermal Resistance (Junction to PCB) Gullwing (GW) 2x .050 (=.100) .015 3x .015 .015±.010 PIN 6 PIN 4 PIN 4 6x .010 PIN 6 6x .030 SSDI 5x R.018 .125 .034 .025 PIN 3 PIN 3 PIN 1 .350 ±.010 .193 PIN 1 .107 .040 ±.010 Tolerances: .xx ±.01 .xxx ±.005 .107 .010 .130 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 6x R.010 .033 .035 DATA SHEET #: TR0045B DOC SFT2369A2 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 4/ IC= 10 mA Collector – Emitter Sustaining Voltage Collector Cutoff Current VCE= 20 V, VBE= 0 V VCE= 10 V, VBE= 0.25 V, TA= 125ºC VCB= 32 V VCB= 40 V VCB= 20 V, TA= 150ºC VEB= 4.0 V Emitter Cutoff Current VEB= 4.5 V DC Forward Current Transfer Ratio 5/ VCE= 0.35 V, IC= 10 mA VCE= 0.40 V, IC= 30 mA VCE= 1.0 V, IC= 10 mA VCE= 1.0 V, IC= 100 mA VCE= 1.0 V, IC= 10 mA, TA= -55ºC Collector – Emitter Saturation Voltage 5/ IC= 10 mA, IB= 1.0 mA IC= 30 mA, IB= 3.0 mA IC= 100 mA, IB= 10 mA IC= 10 mA, IB= 1.0 mA, TA= 125ºC 5/ Base – Emitter Saturation Voltage IC= 10 mA, IB= 1.0 mA IC= 30 mA, IB= 3.0 mA IC= 100 mA, IB= 10 mA IC= 10 mA, IB= 1.0 mA, TA= -55ºC IC= 10 mA, IB= 1.0 mA, TA= 125ºC Collector Cutoff Current Frequency Transition Min Max Units BVCEO 15 — Volts ICEX — 0.4 30 µA ICBO — IEBO — HFE VCE(Sat) VBE(Sat) 0.2 10 30 0.25 10 µA µA 40 30 40 20 20 — — — — 0.7 — 0.8 — 0.59 120 120 120 120 — 0.20 0.25 0.45 0.30 0.85 0.9 1.2 1.02 — Volts Volts VCE= 20V, IC= 20mA, f= 100 MHz fT 500 1000 MHz VCE= 5 V, f= 1 MHz cob — 4.0 pF VCE= 0.5 V, f= 1 MHz cib — 5.0 pF Test Circuit per MIL-PRF-19500/317 ton toff ts — — 12 18 13 ns Output Capacitance Input Capacitance Switching Times Symbol NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ For Package Outlines Contact Factory. 4/ Unless Otherwise Specified, All Electrical Characteristics @ 25ºC. 5/ Pulse Test: Pulse Width= 300µsec, Duty Cycle= 2% PIN ASSIGNMENT Available Part Numbers: SFT2369A2GW Package GW NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Pin 1 Collector1 Pin 2 Base1 Pin 3 Emitter1 DATA SHEET #: TR0045B Pin 4 Collector2 Pin 5 Base2 Pin 6 Emitter2 DOC