SFT5151 and SFT5153 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 10 AMP POWER TRANSISTORS SILICON PNP DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SFT5151 SFT5153 __ __ __ __ │ └ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Package 3/ __ = TO-5 S.5 = SMD.5 100 VOLTS 10 WATTS Features: Radiation Tolerant Fast Switching, 500 nsec max ton High Frequency, Typical ft = 100 MHz BVCEO 80 Volts Min High Linear Gain, Low Saturation Voltage 200°C Operating Temperature Designed for Complementary Use with SFT5152 and SFT5154 Replacement for 2N5151 and 2N5153 TX, TXV, S-Level Screening Available2/ - Consult Factory Maximum Ratings Symbol Value Units Collector – Emitter Voltage VCEO 80 Volts Collector – Base Voltage VCBO 100 Volts Emitter – Base Voltage VEBO 5.5 Volts Collector Current IC 10 Amps Base Current IB 2.5 Amps Total Device Dissipation @ TC = 50°C Derate above 50°C PD 10 66.6 W mW/°C Top & Tstg -65 to +200 °C RθJC 15 °C/W Operating & Storage Temperature Maximum Thermal Resistance Junction to Case NOTES: * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% 1/ For Ordering Information, Price, Operating Curves, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500 3/ For Package Outlines Contact Factory. 4/ Unless Otherwise Specified, All Electrical Characteristics @25°C. TO-5 SMD.5 Available parts: SFT5151, SFT5151S.5 SFT5153, SFT5153S.5 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0109B DOC SFT5151 and SFT5153 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 4/ Symbol Min Max Units Collector– Emitter Breakdown Voltage* IC = 100mA BVCEO 80 –– Volts Collector – Base Breakdown Voltage IC = 200µA BVCBO 100 –– Volts Emitter – Base Breakdown Voltage IE = 200µA BVEBO 5.5 –– Volts Collector – Cutoff Current VCE = 40V ICEO –– 50 µA Collector – Cutoff Current VCE = 60V, VBE = 2V, TA = 150°C ICEV –– 25 µA ICES –– IEBO –– 1.0 1.0 1.0 1.0 µA mA µA mA hFE 20 30 15 20 50 70 25 40 –– 250 –– –– –– 250 –– –– –– VCE = 60V VCE = 100V VEB = 4V VEB = 5.5V Collector – Cutoff Current Emitter – Cutoff Current SFT5151 VCE = 5V, IC = 50mA VCE = 5V, IC = 2.5A VCE = 5V, IC = 2.5A, TA = -55°C VCE = 5V, IC = 5A SFT5153 VCE = 5V, IC = 50mA VCE = 5V, IC = 2.5A VCE = 5V, IC = 2.5A, TA = -55°C VCE = 5V, IC = 5A DC Current Gain * Collector – Emitter Saturation Voltage * IC = 2.5A, IB = 250mA IC = 5.0A, IB = 500mA VCE(Sat) –– –– 0.75 1.5 Volts Base – Emitter Saturation Voltage * IC = 2.5A, IB = 250mA IC = 5.0A, IB = 500mA VBE(Sat) –– –– 1.45 2.2 Volts SFT5151 SFT5153 hfe 20 50 –– –– Current Gain Bandwidth Product VCE = 5V, IC = 0.5A, SFT5151 f = 20MHz SFT5153 fT 60 70 –– MHz Output Capacitance VCB = 10V, IE = 0A, f = 1MHz cob –– 250 pF VCE = 5V, IC = 2.5A VBE(ON) –– 1.45 Volts VCE = 5V, IC = 2.0A, 1 sec VCE = 32V, IC = 310 mA, 1 sec VCE = 80V, IC = 12.5mA, 1 sec SOA1 SOA2 SOA3 –– –– –– tON tOFF –– 500 1500 nsec tS tf –– 1.4 0.5 µsec Common Emitter small signal gain VCE = 5V, IC = 0.1A, f= 1kHz Base – Emitter Voltage* Safe Operating Area Delay Time Rise Time Storage Time Fall Time VCC = 30V, VEB(Off) = 3.7V IC = 5A VEB(Off) = 3.7V, IB1 = IB2 = 0.5A, RL = 6 Ohms NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0109B DOC SFT5151 and SFT5153 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com TO-5 PIN ASSIGNMENT Package TO-5 Pin 1 Emitter Pin 2 Base Pin 3 (Case) Collector SMD.5 .408 .392 .304 .288 .304 .288 .135 .115 3x .020 .010 .030 MIN .030 MIN 2x .103 .087 2x .010 MAX .233 .217 .128 .112 PIN ASSIGNMENT Package SMD.5 Pin 1 Emitter NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Pin 2 Base Pin 3 (Case) Collector DATA SHEET #: TR0109B DOC