SFT5095 and SFT5097 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1 AMP High Voltage NPN Transistor 500-600 Volts DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SFT5095 SFT5097 __ __ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ TXV = TXV Level │ S = S Level │ │ └ Package -4 = 4 Pin CLCC /5 = TO-5 G = CERPACK S.22 = SMD.22 Features: BVCEO to 450 Volts Low saturation voltage Very low leakage 200oC operating temperature Gold eutectic die attach Designed for complementary use with 2N5094 and 2N5096 Available with TO-5, Cerpack, CLCC, and SMD.22 Cases TX, TXV, and S Level Screening Available 3/ Symbol SFT5095 SFT5097 Units VCEO VCER 400 500 450 600 Volts Volts Collector – Base Voltage VCBO 500 600 Volts Emitter – Base Voltage Maximum Ratings Collector – Emitter Voltage (RBE = 1kΩ) VEBO 6 Volts Collector Current IC 1.0 Amps Base Current IB 0.5 Amps Total Power Dissipation @ TC = 100ºC Derate above 100ºC PD 2.0 20 Watts mW /ºC TJ & TSTG -65 to +200 ºC R0JA R0JC R0JC R0JC 175 37.5 9 9 ºC/W Operating & Storage Temperature 4 Pin CLCC TO-5 CERPACK SMD.22 Thermal Resistance (Junction to Case) 4 Pin CLCC (-4) NOTES: TO-5 (/5) CERPACK (G) SMD.22 (S22) 1/ For ordering information, price, operating curves, and availability - contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, maximum ratings/electrical characteristics at 25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0118A DOC SFT5095 and SFT5097 Solid State Devices, Inc. Series 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics 3/ Symbol Min Max Units Collector – Emitter Breakdown Voltage* (IC = 50 mA) SFT5095 SFT5097 BVCEO 400 450 –– –– Volts Collector – Emitter Breakdown Voltage* (IC = 100 µA, RBE = 1K Ohms) SFT5095 SFT5097 BVCER 500 600 –– –– Volts Collector – Base Breakdown Voltage (IC = 100 μA) SFT5095 SFT5097 BVCBO 500 600 –– –– Volts BVEBO 6 –– Volts SFT5095 VCB = 400V SFT5097 VCB = 500V ICBO –– 500 nA (VEB = 4 V) IEBO –– 250 nA (IC = 1 mA, VCE = 5 V) (IC = 25 mA, VCE = 5 V) (IC = 100 mA, VCE = 10 V) HFE 25 50 15 250 300 250 VCE (SAT) –– 500 mV VBE (ON) –– 1.0 Volts fT 25 –– MHz Cob –– 15 pF Emitter – Base Breakdown Voltage (IE = 20 µA) Collector Cutoff Current Emitter Cutoff Current DC Current Gain* Collector-Emitter Saturation Voltage* (IC = 25 mA, IB = 2.5 mA) Base-Emitter Voltage (IC = 25 mA, VCE = 5 V) Current Gain Bandwidth Product* (IC = 50 mA, VCE = 10 V, f = 20 MHz) Output Capacitance Electrical Characteristics VCB = 15 V, IE = 0 A, f = 2.0MHz 3/ Delay Time Rise Time Storage Time Fall Time VCC= 125 V IC= 100 mA IB1 = IB2 = 10 mA Notes: * Pulse Test: Pulse Width = 300 μs. Duty Cycle = 2%. 1/ For ordering information, price, operating curves, and availability - contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, maximum ratings/electrical characteristics at 25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Symbol Typical Units td tr ts tf 50 100 1.5 300 ns ns μs ns PIN ASSIGNMENT (Standard) Package Collector Emitter 4 Pin CLCC (-4) TO-5 (/5) CERPACK (G) SMD.22 Pin 1 Pin 3 CASE Pin 1 DATA SHEET #: TR0118A Pin 2 Pin 1 Pin 1 Pin 2 Base Pin 3 Pin 2 Pin 2 Pin 3 DOC SFT5095 and SFT5097 Solid State Devices, Inc. Series 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com FIGURE 1 – CASE OUTLINES 4 Pin CLCC (-4): CERPACK (G): TO-5 (/5): SMD.22 (S.22): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0118A DOC