VS-15MQ040-M3 www.vishay.com Vishay Semiconductors Schottky Rectifier, 1.5 A FEATURES Cathode • Extremely low forward voltage drop • Guard ring for enhanced ruggedness and long term reliability • Halogen-free according to IEC 61249-2-21 definition • Surface mountable • Compact size • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Compliant to RoHS Directive 2002/95/EC Anode SMA PRODUCT SUMMARY Package SMA IF(AV) 1.5 A VR 40 V VF at IF 0.34 V APPLICATIONS IRM 20 mA at 125 °C TJ max. 150 °C Diode variation Single die EAS 6.0 mJ • • • • • • • Switching power supplies Meter protection Reverse protection for power input to PC board circuits Battery isolation and charging Low threshold voltage diode Freewheeling or by-pass diode Low voltage clamp DESCRIPTION The VS-15MQ040-M3 Schottky rectifier is designed to be used for low power applications where a reverse voltage of 40 V is encountered and surface mountable is required. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS 1.5 A DC VRRM IFSM tp = 5 μs sine VF 2 Apk, TJ = 125 °C TJ Range 40 V 330 A 0.43 V - 40 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-15MQ040-M3 UNITS 40 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 4 SYMBOL IF(AV) TEST CONDITIONS VALUES 50 % duty cycle at TL = 105 °C, rectangular waveform On PC board 9 mm2 island (0.013 mm thick copper pad area) 2.1 50 % duty cycle at TL = 113 °C, rectangular waveform On PC board 9 mm2 island (0.013 mm thick copper pad area) 1.5 5 μs sine or 3 μs rect. pulse 330 Following any rated load condition and with rated VRRM applied UNITS A Maximum peak one cycle non-repetitive surge current See fig. 6 IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 12 mH 6.0 mJ IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A Repetitive avalanche current Revision: 22-Aug-11 10 ms sine or 6 ms rect. pulse 140 A Document Number: 93366 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15MQ040-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 1.5 A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 °C 2A 1.5 A TJ = 125 °C 2A Maximum reverse leakage current See fig. 2 Threshold voltage IRM VF(TO) TJ = 25 °C VR = Rated VR TJ = 125 °C TJ = TJ maximum VALUES UNITS 0.43 0.49 V 0.34 0.43 0.5 mA 20 0.26 V Forward slope resistance rt 64.6 m Typical junction capacitance CT VR = 10 VDC, TJ = 25 °C, test signal = 1 MHz 134 pF Typical series inductance LS Measured lead to lead 5 mm from package body 2.0 nH 10 000 V/μs VALUES UNITS - 40 to 150 °C 80 °C/W Maximum voltage rate of change dV/dt Rated VR Note (1) Pulse width = 300 μs, duty cycle = 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance, junction to ambient RthJA TEST CONDITIONS DC operation Approximate weight Marking device Case style SMA (similar D-64) 0.07 g 0.002 oz. XF Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Revision: 22-Aug-11 Document Number: 93366 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15MQ040-M3 www.vishay.com Vishay Semiconductors 150 Allowable Case Temperature (°C) IF - Instantaneous Forward Current (A) 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 0.1 0.2 140 DC 130 120 110 100 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 90 80 70 60 50 40 30 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 VFM - Forward Voltage Drop (V) 1.0 1.5 2.0 2.5 3.0 Fig. 4 - Maximum Average Forward Current vs. Allowable Lead Temperature 1.6 100 10 Average Power Loss (W) TJ = 150 °C IR - Reverse Current (mA) 0.5 IF(AV) - Average Forward Current (A) Fig. 1 - Maximum Forward Voltage Drop Characteristics TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C 0.01 1.4 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 1.2 1.0 RMS limit 0.8 0.6 0.4 DC 0.2 TJ = 25 °C 0 0.001 0 5 10 20 15 25 30 35 0 40 TJ = 25 °C 10 5 10 15 20 25 30 35 40 45 IFSM - Non-Repetitive Surge Current (A) 1000 0 1.0 1.5 2.0 2.5 3.0 Fig. 5 - Maximum Average Forward Dissipation vs. Average Forward Current Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage 100 0.5 IF(AV) - Average Forward Current (A) VR - Reverse Voltage (V) CT - Junction Capacitance (pF) Square wave (D = 0.50) 80 % rated VR applied See note (1) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 VR - Reverse Voltage (V) tp - Square Wave Pulse Duration (µs) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 22-Aug-11 Document Number: 93366 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15MQ040-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 15 M Q 040 -M3 1 2 3 4 5 6 1 - Vishay Semiconductors product suffix 2 - Current rating 3 - M = SMA 4 - Q = Schottky “Q” series 5 - Voltage rating (040 = 40 V) 6 - Environmental digit: -M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-15MQ040-M3/5AT PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 5AT 7500 13" diameter plastic tape and reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95400 Part marking information www.vishay.com/doc?95403 Packaging information www.vishay.com/doc?95404 Revision: 22-Aug-11 Document Number: 93366 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors SMA DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode band Mounting Pad Layout 0.074 (1.88) MAX. 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.066 (1.68) MIN. 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 95400 Revision: 09-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1