3RHP Series DC Control • 40 and 50A output • Voltage ratings to 240 VAC • Lifetime 2 million operations at full load • LED input status indicator • Wire, lug or quick connect termination • Industry Standard DP contactor mounting PRODUCT SELECTION Control Voltage 4.5-5.5 VDC 10-15 VDC 22-27 VDC 40A 120 VAC 50A 120 VAC 40A 240 VAC 50A 240 VAC 3RHP1240D5 3RHP1240D12 3RHP1240D24 3RHP1250D5 3RHP1250D12 3RHP1250D24 3RHP2440D5 3RHP2440D12 3RHP2440D24 3RHP2450D5 3RHP2450D12 3RHP2450D24 OUTPUT SPECIFICATIONS (voltage) Description Operating Voltage (47-63Hz) [Vrms] Maximum Off-State Leakage Current per channel 120 VAC 240 VAC 100-120 0.05 mA @ 120 VAC 208-240 0.06 mA @ 240 VAC OUTPUT SPECIFICATIONS (current) Description 40A Maximum Load Current per phase @ 40°C [Arms] (1) 40A Resistive / 30A Inductive Power terminals 1/4" Quick Connect and 10x32 binder head screws Wire Size 8-14 AWG 50A 50A Resistive / 40A Inductive 1/4" Quick Connect and box lugs 6-14 AWG INPUT SPECIFICATIONS Description Coil Voltage Max. Reverse Voltage Input Current Min. Turn-On Voltage Min. Turn-Off Voltage SUFIX D5 SUFIX D12 SUFIX D24 4.5-5.5 VDC -5.5 VDC 12mA @ 5 VDC 4.5 VDC 1 VDC 10-15 VDC -15.5 VDC 12mA @ 12 VDC 9.5 VDC 2 VDC 22-27 VDC -27.5 VDC 12mA @ 24 VDC 9.5 VDC 2 VDC GENERAL SPECIFICATIONS Description Dielectric Strength, Input to Output Dielectric Strength, Input/Output to ground Contacts (2) Ambient Operating Temperature Range (3) Ambient Storage Temperature Range Max. Turn-On Time 50/60 Hz Max. Turn-Off Time 50/60Hz Maximum Number of Operations Lifetime Number of Operations @ Rated Current (4) Weight (typical) Screw Torque (input/Output) 40A Screw Torque (input/Output) 50A Parameters 4000 Vrms 2500 Vrms Three Normally Open -20 to 75 °C -40 to 100 °C 20 ms / 16.6 ms 40 ms / 32 ms 30 per Minute > 2 Million 1.19 lbs (540 g) 5.31 in lb (0.6 Nm) / 18 in lb (2.1 Nm) 5.31 in lb (0.6 Nm) / 25 in lb (2.9 Nm) GENERAL NOTES (1) (2) (3) (4) See Derating curves for additional operating conditions. The R HP includes a Solid State Relay, therefore electrical isolation is not provided. The R HP includes over temperature protection for the solid state relay. 40°C ambient temperature, 30 operations/min, maximum voltage control. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION TYPICAL ELECTRICAL CONNECTIONS AGENCY APPROVALS UL/cUL Rev. 011409 ACCESSORIES ANNEX - ENVIROMENTAL INFORMATION