Oscilent Corporation IF SAW Filter | 813-SL300.0M-02 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL300.0M-02 13.3 x 6.5 SMD IF SAW Filter Jan 01, 2007 TYPE : 300.0 MHz IF SAW Filter PART NUMBER : 813-SL300.0M-02 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency (Fo) - 300.0 - MHz Insertion Loss at Fo - 17.5 - dB Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm Temperature Coefficient - -0.03 - ppm/C - 1.0 1.5 dBp-p 1dB Bandwidth 2.0 2.54 - MHz 3dB Bandwidth 3.0 3.66 - MHz 40dB Bandwidth - 9.74 11.0 MHz Amplitude Ripple - Relative Attenuation: Lower Sidelobe 50 55 - dB Upper Sidelobe 50 55 - dB Absolute Delay at Fo - 0.509 1.2 us Group Delay Variation - 150 200 ns Ambient Temperature - 25 - C *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary PACKAGE OUTLINE TEST CIRCUIT (mm) Oscilent Corporation IF SAW Filter | 813-SL300.0M-02 Page 2 of 2 TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: L1: 55 nH; C1: 23 pF OUTPUT: L2: 54 nH; C2: 23.3 pF FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 813-SL300.0M-02