Oscilent Corporation IF SAW Filter | 809-IF38.912M-C Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 809-IF38.912M-C 9.1 x 4.8 SMD Mobile Communication Jan. 01, 2007 TYPE : 38.912 MHz IF SAW Filter 1.5 MHz Bandwidth PART NUMBER : 809-IF38.912M-C OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 38.812 38.912 40.012 MHz - 22.5 25.0 dB -3.0 dB Bandwidth 1.40 1.50 - MHz -30.0 dB Bandwidth - 2.85 3.00 MHz Spurious Response 30.00 to 36.26 MHz 35 40 - dB Spurious Response 36.26 to 37.30 MHz 33 37 - dB Spurious Response 40.60 to 41.40 MHz 35 40 - dB Spurious Response 41.40 to 50.00 MHz 35 38 - dB Source Impedance (Single Ended)* - 50 - ohm Load Impedance (Single Ended)* - 50 - ohm Temperature Coefficient - 20 - ppm/°C Center Frequency Insertion Loss at Fo * With Matching Network (Ref. Testing Environment Circuit as shown below) Those impedances could be modified with different impedance values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST CIRCUIT Oscilent Corporation IF SAW Filter | 809-IF38.912M-C Page 2 of 2 SOURCE AND LOAD IMPEDANCE 50 ohm FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 809-IF38.912M-C