ECO-PACTM 2 Fast Recovery Epitaxial Diode (FRED) PSEI 2x101 VRRM trr Preliminary Data Sheet VRSM VRRM Type (V) (V) 600 600 PSEI 2x101/06 Symbol Test Conditions IFRMS I FAVM* I FRM IFSM TVJ = TVJM ∫ i dt 2 TVJ TVJM Tstg VISOL IFAVM AC-1 IK-10 LN -9 VX-18 = 2x 96 A = 600 V = 35 ns Maximum Ratings 150 A Features 96 A tP<10µs; rep.rating, pulse widthlimited by TVJM TBD A TVJ = 45 °C t = 10 ms (50 Hz), sine 1200 A VR = 0 t = 8.3 ms (60 Hz), sine 1300 A 2 independent FRED in 1 package Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop TVJ = 125 °C t = 10 ms (50 Hz), sine 1080 A • • • • • VR = 0 t = 8.3 ms (60 Hz), sine 1170 A TVJ = 45 °C t = 10 ms (50 Hz), sine 7200 A²s Very short recovery time Soft recovery behaviour VR = 0 • • • TC = 70 °C, rectangular, d=0.5 t = 8.3 ms (60 Hz), sine 7100 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 5800 A²s VR = 0 5700 A²s -40... + 150 150 °C °C • -40... + 150 °C 2500 V∼ • • • t = 8.3 ms (60 Hz), sine 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA 3000 V∼ 1.5 - 2.0 14 - 18 24 Nm lb.in. g t=1s Md Mounting torque Weight typ. (M4) Symbol Test Conditions Characteristic Value IR TVJ = 25°C, VR=VRRM TVJ = 25°C, VR=0.8.VRRM TVJ = 125°C, VR=0.8.VRRM max. max. max. 3 1 20 mA mA mA VF VTO rT RthJC RthCH I RM IF = 100 A, max. 1.25 V 0.7 V 4.7 mΩ trr IF=1A; -diF/dt=400A/µs; VR=30V; TVJ = 25 °C For power-loss calculations only per diode; max. 0.5 K/W 0.05 K/W typ. 19 A typ. 35 ns 11.2 11.2 50 mm mm m/s² per diode; typ. IF=80A; -diF/dt=200A/µs; VR=100V Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight L≤0.05 mH; TVJ= 100°C TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Data according to IEC 60747 refer to a single diode unless otherwise stated *IFAVM rating includes blocking losses at TVJM; VR=0.8 VRRM; duty cycle d=0.5 2001 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 150 A 7 T = 100°C µC VJ V = 300V 6 R 125 IF Qr 100 IRM 60 5 IF=200A IF=100A IF= 50A 4 75 TVJ=150°C 3 TVJ=100°C 2 50 25 80 A TVJ= 100°C 70 VR = 300V 50 30 20 1 10 TVJ=25°C 0 0.0 0.5 1.0 V VF 0 100 1.5 Fig. 1 Forward current IF versus VF 260 ns 240 1.2 trr 1.0 0.8 I RM 100 120 °C 150 IF=200A IF=100A IF= 50A 0 200 400 TVJ Fig. 4 Dynamic parameters Qr, IRM versus TVJ 3.0 µs 2.5 tfr 40 140 50 600 A/µs 800 1000 -diF/dt TVJ= 100°C IF = 100A 50 160 0 400 VFR 180 0.6 200 Fig. 3 Peak reverse current IRM versus -diF/dt 600 A/µs 800 1000 -diF/dt Fig. 5 Recovery time trr versus -diF/dt 1 K/W 2.0 t fr 200 Qr 0.4 0 60 V TVJ= 100°C VR = 300V 220 Kf 0 A/µs 1000 -diF/dt Fig. 2 Reverse recovery charge Qr versus -diF/dt 1.4 IF=200A IF=100A IF= 50A 40 VFR 30 1.5 20 1.0 10 0.5 0 0 200 400 600 800 diF/dt 0.0 1000 A/µs Fig. 6 Peak forward voltage VFR and tfr versus diF/dt Package style and outline Dimensions in mm (1mm = 0.0394“) D=0.7 ZthJC 0.5 0.3 0.2 0.1 0.1 0.05 Single Pulse 0.05 0.001 DSEI 2x101-06 0.01 0.1 1s t 10 Fig. 7 Transient thermal impedance junction to case at various duty cycles 2001 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20