ECO-PACTM 1 Fast Recovery Epitaxial Diode (FRED) PSEI 2x30 PSEI 2x31 IFAVM VRRM t rr = 2x 30 A = 400/600 V = 35 ns Preliminary Data Sheet VRSM VRRM Type (V) (V) 440 400 PSEI 2x30/04 640 600 PSEI 2x30/06 PSEI 2x31/04 PSEI 2x31/06 2x 30 2x31 Symbol Test Conditions IFRMS I FAVM* I FRM IFSM TVJ = TVJM 70 A TC = 85 °C, rectangular, d=0.5 ∫ i dt 2 TVJ TVJM Tstg VISOL Maximum Ratings 30 A tP<10µs; rep.rating, pulse widthlimited by TVJM 375 A TVJ = 45 °C t = 10 ms (50 Hz), sine 300 A VR = 0 t = 8.3 ms (60 Hz), sine 320 A TVJ = 125 °C t = 10 ms (50 Hz), sine 260 A VR = 0 t = 8.3 ms (60 Hz), sine 280 A TVJ = 45 °C t = 10 ms (50 Hz), sine 450 A²s VR = 0 t = 8.3 ms (60 Hz), sine 420 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 340 A²s VR = 0 320 A²s -40... + 150 150 °C °C -40... + 150 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3600 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t = 8.3 ms (60 Hz), sine t=1s Md Mounting torque Weight typ. Symbol Test Conditions IR TVJ = 25°C, VR=VRRM TVJ = 25°C, VR=0.8.VRRM TVJ = 125°C, VR=0.8.VRRM max. max. max. 100 50 7 µA µA mA VF IF = 30 A, TVJ = 150 °C max. 1.4 V TVJ = 25 °C max. 1.6 V VTO rT RthJC RthKH I RM (M4) Characteristic Value For power-loss calculations only 1.01 V 7.1 mΩ per diode; max. 1.25 K/W per diode; typ. 0.05 K/W typ. 10 A typ. 35 ns 11.2 11.2 50 mm mm m/s² IF=30A; -diF/dt=240A/µs; VR=350V Features • • • • • 2 independent FRED in 1 package Isolation voltage 3600 V∼ Planar glass passivated chips Low forward voltage drop • • • Very short recovery time Soft recovery behaviour Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • • • • • Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight L≤0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=100A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Data according to IEC 60747 refer to a single diode unless otherwise stated *IFAVM rating includes blocking losses at TVJM; VR=0.8 VRRM; duty cycle d=0.5 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Package style and outline Dimensions in mm (1mm = 0.0394“) Fig. 7 Transient thermal impedance junction to case. 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20