TM ECO-PAC 2 IGBT Module Preliminary Data Sheet GH 10 NTC X15 NTC VX 18 X16 PSI 100/06* X16 L9 F1 IK 10 AC 1 PSIS 100/06* PSSI 100/06* IGBTs LMN S Symbol Conditions VCES TVJ = 25°C to 150°C IC25 IC80 TC = 25°C TC = 80°C ICM VCEK VGE = ±15 V; RG = 15 Ω; TVJ = 125°C RBSOA, Clamped inductive load; L = 100 µH tSC (SCSOA) VCE = VCES; VGE = ±15 V; RG = 15 Ω; TVJ = 125°C non-repetitive Ptot TC = 25°C Symbol Conditions VCE(sat) IC = 100 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C VGE(th) IC = 1.5 mA; VGE = VCE ICES VCE = VCES; VCE = 0 V; VGE td(on) tr td(off) tf Eon Eoff A IJK Maximum Ratings VGES IGES IK 10 NTC L9 T16 X15 X13 K10 X16 X15 AC 1 OP 9 L9 E2 IC25 = 93 A VCES = 600 V VCE(sat)typ. = 2.4 V PSIG 100/06 PSI 100/06* PSIS 100/06* PSSI 100/06* 600 V ± 20 V 93 63 A A 150 VCES A 10 µs 294 W Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. 2.4 2.8 2.8 V V 6.5 V VGE = 0 V; TVJ = 25°C TVJ = 125°C 1.4 6.5 mA mA = ± 20 V 150 nA 4.5 Inductive load, TVJ = 125°C VCE = 300 V; IC = 60 A VGE = 15/0 V; RG = 15 Ω 150 60 450 40 3.2 2.2 ns ns ns ns mJ mJ Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 4.2 nF RthJC RthJH (per IGBT) 0.85 0.43 K/W K/W with heatsink compound (0.42 K/m.K; 50 µm) PSIG 100/06 *NTC optional Features • • • • • • Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • AC and DC motor control AC servo and robot drives power supplies welding inverters Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 PSIG PSI PSIS PSSI 100/06 Reverse diodes (FRED) Symbol Conditions Maximum Ratings IF25 IF80 TC = 25°C TC = 80°C 134 82 Symbol Conditions Characteristic Values min. typ. max. VF IF = 60 A; TVJ = 25°C TVJ = 125°C 1.78 1.33 IRM trr IF = 60 A; diF/dt = 500 A/µs; TVJ = 125°C VR = 300 V; VGE = 0 V 28 100 A ns RthJC RthJH with heatsink compound (0.42 K/m.K; 50 µm) 1.32 0.66 K/W K/W A A 1.99 Package style and outline Dimensions in mm (1mm = 0.0394“) PSI V V Temperature Sensor NTC Symbol Conditions Characteristic Values min. typ. max. R25 B25/50 T = 25°C 4.75 5.0 3375 5.25 kΩ K Module Symbol Conditions PSSI Maximum Ratings TVJ Tstg -40...+150 -40...+150 °C °C VISOL IISOL ≤ 1 mA; 50/60 Hz 3000 V~ Md Mounting torque (M4) a Max. allowable acceleration 1.5 - 2.0 14 - 18 50 Nm lb.in. m/s 2 Symbol Conditions Characteristic Values min. typ. max. dS dA Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) 11.2 11.2 Weight mm mm 24 PSIG g PSIS 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20