DD22 Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole, for PCB Mounting Standard- or Medical-Filter Fuse drawer must be ordered separately (see accessories). C14 70° C Description Characteristics Approvals Other versions on request -Panel Mount: Screw-on mounting on PCB, from rear-side -4 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole, Line filter in standard and medical version -PCB solder terminals -Alternative: version without line filter DD21 -Ultra-compact design. Ideal for low profile designs -All single elements are already wired -For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front -Ideal for application with high transient loads -Qualified for use in equipment according IEC/EN 60950 -Fuse drawer 1-pole, plus spare fuse case -Fuse drawer 2-pole, with shorting bar -Other rocker marking -Line switch, illuminated -Line switch 1-pole -Medical version M80 -Protection class II, 70°C -VDE License Number: 40001522 -UL License Number: E72928 References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 250 VAC; 50/60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (1 min/50 Hz) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting 3 mm additional quick connect 6.3 x 0.8 mm Screw-on mounting: max 3 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch Line Filter MTBF EMC Products C14 acc. to IEC/EN 60320-1 UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical details Standard and Medical Version, IEC 60939, IEC 60601‑1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 2'000'000 h acc. to MIL-HB-217 F DD22 Power Entry Modules with Line Filter www.schurter.com/pg06 Dimensions Screw version 66.3 mm 66.3 60.9 49.2 9.8 3.5 0.85 1) 3.55 2.15 4.5 2.8 R 4. 30.8 16.25 49.6 ±0.10 11.5 15.25 58.5±0.15 58.5 30.8 ±0.20 57.5 57.5 ±0.2 4 4 4. 3. R 41 48 3.6 1.6 1.6 +0 . 0 10 +0 . 0 10 3.6 1) all terminals with 1.25 x 0.8 2) Quick connect terminal 6.3 x 0.8 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version 2 x 10 100 2.2 1 2 Standard Version 2x4 100 2.2 1 4 Standard Version 2 x 1.5 100 2.2 1 6 Standard Version 2 x 0.8 100 2.2 1 10 Standard Version 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2x4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 EMC Products .10 0 +0 1.6 3.55 ±0.1 2) 6.6 6.2 11.5 ±0.15 14.75 ±0.15 6.05 ±0.1 6 3. 30.1 ±0.10 31.5 33 17 29.7 3.4 5 ±0 .0 5 R 4. 35 11.55 47.6 DD22 Power Entry Modules with Line Filter www.schurter.com/pg06 Filter Medical M5 non illuminated 1) Line 2) Load 1) Line 2) Load Derating Curves 1-pole 2-pole Admissible power acceptance in Watt 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Diagrams Filter Standard non illuminated Ambient air temperature Ta °C 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Attenuation Loss Standard version 1A - - - - differential mode _____ common mode 2A 4A 6A 2A 4A 6A 10 A Medical version (M5) 1A 10 A EMC Products DD22 Power Entry Modules with Line Filter www.schurter.com/pg06 Variants Fuse drawer must be ordered separately (see accessories). Rated Current [A] Filter-Type Fuseholder Line Switch Order Number 1 Standard Version 1-pole 2-pole DD22.1111.1111 2 Standard Version 1-pole 2-pole DD22.2111.1111 4 Standard Version 1-pole 2-pole DD22.4111.1111 6 Standard Version 1-pole 2-pole DD22.6111.1111 10 Standard Version 1-pole 2-pole DD22.9111.1111 1 Standard Version 2-pole 2-pole DD22.1121.1111 2 Standard Version 2-pole 2-pole DD22.2121.1111 4 Standard Version 2-pole 2-pole DD22.4121.1111 6 Standard Version 2-pole 2-pole DD22.6121.1111 10 Standard Version 2-pole 2-pole DD22.9121.1111 1 Medical Version (M5) 2-pole 2-pole DD22.1321.1111 2 Medical Version (M5) 2-pole 2-pole DD22.2321.1111 4 Medical Version (M5) 2-pole 2-pole DD22.4321.1111 6 Medical Version (M5) 2-pole 2-pole DD22.6321.1111 10 Medical Version (M5) 2-pole 2-pole DD22.9321.1111 Packaging unit 20 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to DD22 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to DD22 ... EMC Products DD22 Power Entry Modules with Line Filter www.schurter.com/pg06 Category / Description Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to DD22 ... The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.