AFS4000 and AFS6000 Rack Mountable Power Shelves NOTICE SOME MODELS LISTED IN THIS DOCUMENT HAVE BEEN DISCONTINUED Please contact your local Artesyn representative or use the on line model number search tool at http://www.artesyn.com/powergroup/products.htm • • • • • Front-end shelves for AFE2000 series power supplies Distributed power architecture UL and TUV approval Hot-swap power system N+1 redundancy to find a suitable alternative. The AFS4000 and AFS6000 power shelves are designed to house Artesyn standard AFE2000 series front-end power supplies. The shelves mount into standard 19 inch racks. The power shelves accept high range (200 to 240VAC) AC power and deliver a regulated DC bus voltage generated from the AFE2000 power supplies. The power shelf provides input filtering and protection and individual 20 Amp circuit breakers for each AFE2000 power supply are provided on the front end of the shelf. An output bus bar on the rear of the unit is provided for distribution of the main output to system payload. Control, diagnostic and protection signals and the auxiliary output from AFE2000 power supplies are routed through the power shelf to a parallel interface connector on the rear of the unit. Clearance is provided on the rear of the unit to maintain adequate airflow and cooling of the AFE2000 power supplies mounted within the shelf. [ 2 YEAR WARRANTY ] POWER SHELF MAIN OUTPUT POWER N+1 REDUNDANT POWER HEIGHT AFE2000 POWER SUPPLIES SIGNAL INTERFACE AFS4000-3U2P 4000W 2000W 3U (5.25 inch) 2 Parallel via 25 pin D type connector AFS6000-4U3P 6000W 4000W 4U (7.0 inch) 3 Parallel via 37 pin D type connector AFS Power Shelf Characteristics POWER MODULE POWER SHELF AFE2000-26S48NA AFE2000-26S54NA AFE2000-26S56NA AFS4000-3U2P 48V @ 83A 12V @ 2A 54.5V @ 73A 12V @ 2A 56.2V @ 71A 12V @ 2A AFS6000-4U3P 48V @ 124A 12V @ 3A 54.5V @ 109A 12V @ 3A 56.2V @ 106A 12V @ 3A AFE2000 Output Configurations with AFS Power Shelves Nominal Input Voltage Line Current (Typical) 200VAC 11.6A rms 200VAC 11.2A rms 220VAC 10.6A rms 240VAC 9.7A rms AC Input Line Cord Current (for each AFE2000 module within power shelf) PAGE 1 DISTRIBUTED POWER FRONT END AC/DC POWER SUPPLIES | 2000W AC/DC AFS4000 and AFS6000 Rack-mountable power shelves for AFE2000 series modules Mechanical Notes for AFS4000-2U2P Interface Drawing 1 All dimensions in inches (mm). NORMAL AIR FLOW VENT AREA (KEEP FREE OF OBSTRUCTIONS) ALLOW 6" CLEARENCE FRONT / BACK TO INSURE ADEQUATE COOLING 17.32 (439.93) CUSTOMER SIGNAL ACCESS (CONNECTOR) MATE - USE 25 PIN D-TYPE CONNECTOR VENTING FOR POWER SYSTEM OPTION SLOT PWB - FARSIDE A AC SECTION BREAKERS/LINE FILTERS 0.12 (3.05) 13.5 (342.90) CUSTOMER DC OUTPUT POWER BUS ACCESS (TWO 10-32 STUDS EACH OUTPUT VIEW A-A REAR VIEW AFE2000 SERIES HOT PLUGGABBLE POWER SUPPLIES CHASSIS GND (#8-32 STUDS) CUSTOMER 200-240 VAC INPUTS HUBBELL H320BL MATE - USE 20 AMP POWER CORD WITH HUBBELL H320C CONNECTOR POWER SYSTEM OPTION SLOT 0.406 (10.312) 1.50 (31.0) REF TYP 0.265 (6.731) TYP 2.250 5.22 (132.59) (57.150) AC GOOD PWR GOOD FAIL V OUT AC GOOD CLEARANCE TO ACCOMMODATE CABINET RAIL MTG/SUPPORT PWR GOOD MOUNTING BRACKETS OPTIONAL LOCATION FAIL A V OUT 1.49 (37.85) 0.093 (2.362) REF 18.31 (465.07) 19.00 (482.60) International Safety Standard Approvals EN60950/IEC950 File No. E9972397 UL1950 File No. E135734 Please consult our website for the following items: ✔ Application Note http://www.artesyn.com PAGE 2 2000W AC/DC | DISTRIBUTED POWER FRONT END AC/DC POWER SUPPLIES AFS4000 and AFS6000 Rack-mountable power shelves for AFE2000 series modules Mechanical Notes for AFS6000-4U3P Interface Drawing 1 All dimensions in inches (mm). NORMAL AIR FLOW CHASSIS GND (#9-32 STUDS) ALLOW 6" CLEARANCE FRONT/BACK TO INSURE ADEQUATE COOLING VENT AREA (KEEP FREE OF OBSTRUCTIONS) 17.32 (439.93) CUSTOMER SIGNAL ACCESS (CONNECTOR) MATE - USE 37 PIN D-TYPE CONNECTOR 13.70 (347.98) VIEW A-A REAR VIEW CUSTOMER 200-240 VAC INPUTS HUBBELL H320BL MATE - USE 20 AMP POWER CORD WITH HUBBELL H320C CONNECTOR AFE2000 SERIES HOT PLUGGABLE POWER SUPPLIES AC SECTION BREAKERS/LINE FILTERS 0.12 (3.05) 1.50 (38.10) REF A CUSTOMER DC OUTPUT POWER BUS ACCESS (THREE 10-32 STUDS EACH OUTPUT) 0.406 (10.312) 0.265 (6.731) AC GOOD AC GOOD AC GOOD FAIL FAIL FAIL PWR GOOD PWR GOOD PWR GOOD 1.750 (44.45) 1.750 (44.45) 6.97 (177.04) 1.750 (44.45) 0.86 (21.84) A MOUNTING BRACKETS OPTIONAL LOCATION 0.093 (2.36) REF CLEARANCE TO ACCOMMODATE CABINET RAIL MTG/SUPPORT V OUT V OUT V OUT 18.08 (459.23) 18.98 (482.09) DIMENSIONS IN INCHES (MM) PAGE 3 ds_afs4000_6000_obs_obs_20010404.PDF Data Sheet © Artesyn Technologies® 2001 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.